After upgrading to BE 2012 Sharepoint jobs fails, Access Denied.
Hi After upgrading and thenreinstalling BE 2012 my Sharepoint 2007SP3jobs failes. Much like the old http://www.symantec.com/business/support/index?page=content&id=TECH163882, fixed in 2010R3 SP2. Completion status: Failed Final error: 0xe0001602 - Access is denied (Share point backup). Final error category: Security Errors For additional information regarding this error refer to link V-79-57344-5634 This Exception may also show up: Backup- Sharepoint - 80\Content-DB1 (SERVERNAME\SHAREPOINT\WSS_Content) When I create the job the Test credentials check out OK, all passes. But the the job runs and it failes, when I the go in and check the credentials again they failed. Any one else with this problem? Solution? regards Robert
Backup Exec 2010 R3 and SharePoint 2010 - error: 0xe0009b61
BackUp Exec 2010 r3 SharePoint 2010 Agent for Microsoft SharePoint A while back my SharePoint backup job started to fail. I opened up a ticket with Symantec with no success. What I realized is once I ran the powershell command "psconfigui" to update the configuration and content databases for SharePoint that the job ran without issue for 2 days or so. Then it would error again. Job ended: Sunday, September 30, 2012 at 10:01:17 PM Completed status: Failed Final error: 0xe0009b61 - The logon account that was provided does not have valid credentials. Ensure that the user name and password are correct, and then try again. Final error category: Security Errors For additional information regarding this error refer to link V-79-57344-39777 I would then run the "psconfigui" and it will run without issue for about 2 days. Has anyone seen this before? Does anyone have and ideas or solution?
Sharepoint GRT meta data index catalog very very slow
Hi everybody, we report the following problem: the meta-index catalog job, that starts after the backup job of sharepoint server with GRT enabled,run/is very very slowly (less than 5 MB/s) so itis not able toend correctly (we stopped it after 2 days running). The backup server is BackupExec 2012 SP1 installed on Windows 2008 R2, the backup job of sharepoint run on deduplication storage that stands on local. Any idea? Thanks for your help.BE 2012 and Data Domain w/ DDBoost
Background: So we have Backup Exec 2012 and two Data Domain DD620's. We have all the required licensing including the Data Domain DD Boost and replication licenses. I have installed the Open Storage Technology (OST) plugin 2.5.0.3 as suggested for the version of BE. Both DD boxes are visable and connected to my BE server. I have foud some documentation and a video that explains some of what I am looking for but not entirely and most of it is for BE2010. The BE 2012 documentation from DD is not up to date yet. I am trying to setup backups as my tape drive has had enough and is not working properly. Anyone I have talked to just says you backup to it, then I continue finding little things that need to be done. No verify, no precompression, some said no deduplication in the job, other said server side dedupe because DDBoost manages it with OST plugin. Too much information and not enough people knowing what to tell me. The DD weekend support guys don't know the software titles they just know the hardware. I need help now unfortunately... Question: What settings do I use for Backups? I have Active Directory, Exchange, SharePoint, and SQL agents.
BE_ST Tool, VxGather and tracer.exe viewer
Hi team, I´m working providing Symantec Support for Backup Exec with a Partner Hardware Manufacturing and some times I need to use the follow troubleshooting tools as a bellow: Be_ST (Backup Exec Support Tool) VxGather Tracer.exe Log Debug (From Register entries) SGMON (Live Debug) I´d like to know if there are any tool that help to viewer these logs. I usually have difficult to interpreter the because these logs aren´t easy. Thank in advance for any help. Fginacio
Problem selecting sharepoint 2007 farm in BE2012 R3
Hi! I've recently had to reinstall our BE2010 R3 setup on a new server, ever since I've not been able to select our Sharepoint 2007 farm, I keep getting this error: "None of the web servers for the specified server farm could be accessed" This happens when I try to add the server farm to the list. What I find most curious is, before I could just browse the sharepoint server, and it would detect the sharepoint farm automatically. What just happened?Sharepoint Server Recovery
Hi. I have a few questions about backing up Sharepoint via Symantec Backup Exec 2010 R3. So, I choose to run a daily full on all the sharepoint data on a particular server farm. Per the best practices, I'm supposed to also backup the sql databases, that sharepoint uses. However, when I expand the Microsoft SQL server node, on the sharepoint server, the sharepoint databases are greyed out and areunable to be selected. http://www.symantec.com/business/support/index?page=content&id=HOWTO21789 Also, thefull backup (sharepoint only selected) completes with a warning telling me that thesharepoint databases are 'configured to maintain transaction logs', which I think means that they are in full recovery mode. It goes on to say that 'transaction log backups are not being performed', and 'that the log will keep growin'. All of which I know is true when you have a database in a full recovery model. I know that my options are either to: 1) change the db to simple (for now, I'd really like to keep point in time restore, even though I do daily backups) 2) backup the database using the backup exec sql agent (which, as I described above, backup exec DOES NOT ALLOW me to do) 3) run a maintenance plan using sql management studio on the respective databases (which I'm apprehensive to do, because I don't know what the effect will be with backup exec) Can anyone help shed some light on what I should be doing to backup BOTH my databases and sharepoint info, per the best practice.
Anyone have an idea how to fix Final error: 0x320050 - 0x 320050 (3276880)
Running 12.5, Doing incremental job and now recieve this error and job fails. All searches provide little info. The link below goes to: Symantec Suggest NO Answers Found. Any help would be appreciated. Job ended: Friday, January 20, 2012 at 1:03:26 AM Completed status: Failed Final error: 0x320050 - 0x 320050 (3276880) Final error category: Other Errors For additional information regarding this error refer to link V-79-50-80SharePoint 2010 restore fails - 0xe0001602 Access is denied
Hi, We are currently testing our Backup Exec 2010 R3 backups of our SharePoint 2010 installation. Backup Exec and it's agents have all been patched to the latest level including hotfixes. We tried making a backup of a site onto tape. Then deleted the site and tried restoring it again. We end up with the following errors, which we cannot find any information on (also nothing in the Windows Event Viewer or in the SharePoint logs): The Job Information, Job Operation - Restore, Set Information, Restore Set Information shows the error: V-79-57344-65300 - The Sharepoint resource is not responding. Backup set canceled. This is strange, because the SharePoint server responds just fine (it ran a backup just a few minutes earlier). Further down in the Job Log, at the Job Completion Status,it says: Job ended: 8. december 2011 at 14:31:25 Completed status: Failed Final error: 0xe0001602 - Access is denied (Share point backup). Final error category: Security Errors For additional information regarding this error refer to link V-79-57344-5634 And under Errors: Click an error below to locate it in the job log Restore V-79-57344-65300 - The Sharepoint resource is not responding. Backup set canceled. Can anyone help us getting this running? Best regards, Jan.
