VMotion vs VCS
We have a slightly complicated question, it is, however, not really that complicated. We are moving one of our money generating apps over to dedicated UCS blades, and in VCS, (Linux on UCS blades with VCS), there is, however, some talk of using VMware and vMotion, and treat this application like other VM's that we have - in the sense, vMotion them in case of failover. This app has Terabytes of data. It is currently running on powerful Solaris systems and will be migrated to Linux on UCS. I sense that VMware is good for small databases and small apps..... My thinking is that changes should occur at higher levels, thereby insulating lower levels, given this logic, for instance, a failover should occur at the VCS level, not below the os....things like, if the os gets corrupted, vMotion will move the corrupted data alongwith. What do you recommend and why?
V-16-2-13027 Oracle Rac
Dears , Engine_A is started to be flooded with V-16-2-13027 error code , eventually some resources fail after passing multiple failed monitoring cycle , clean is called . - PrivNIC is configured with 2 interfaces , which are the same two interfaces used for cluster inter-communications . - lltstat errors shows : 60 Snd not connected 0 Snd no buffer 0 Snd stream flow drops 1636916 Snd no links up - ps -ef don't show hanged moniroing process or something . - Server performance is fine in general , no recent changes was done . Any ideas ?
need a solution
we have 2 node cluster and with version 5.1 we experienced outage and I think it was due to below error messages can someone shed some light on these messages qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop OFFLINE qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop ONLINE fctl: [ID 999315 kern.warning] WARNING: fctl(4): AL_PA=0xe8 doesn't exist in LILP map scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875f9d9,0 (ssd3): Command failed to complete...Device is gone scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875f9d9,0 (ssd3): Command failed to complete...Device is gone scsi: [ID 107833 kern.warning] WARNING: /pci@0,600000/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w203400a0b875f9d9,0 (ssd3): Command failed to complete...Device is gone scsi: [ID 243001 kern.info] /pci@0,600000/pci@0/pci@9/SUNW,qlc@0/fp@0,0 (fcp4): offlining lun=0 (trace=0), target=e8 (trace=2800004) vxdmp: [ID 631182 kern.notice] NOTICE: VxVM vxdmp V-5-0-0 removed disk array 600A0B800075F9D9000000004D2334F5, datype = ST2540- vxdmp: [ID 443116 kern.notice] NOTICE: VxVM vxdmp V-5-0-0 i/o error occured (errno=0x6) on dmpnode 334/0x2c last message repeated 59 times vxdmp: [ID 480808 kern.notice] NOTICE: VxVM vxdmp V-5-0-112 disabled path 118/0x18 belonging to the dmpnode 334/0x28 due to open failure vxdmp: [ID 824220 kern.notice] NOTICE: VxVM vxdmp V-5-0-111 disabled dmpnode 334/0x28 what is this dmpnode 334/0x28 signify, I forget how to map this to device as i only remember is tht its in hexadecimal. Also, what could be the cause of it ... is it due to HBA as issue starts with the message like below qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop OFFLINE qlc: [ID 630585 kern.info] NOTICE: Qlogic qlc(1): Loop ONLINE fctl: [ID 999315 kern.warning] WARNING: fctl(4): AL_PA=0xe8 doesn't exist in LILP mapLoadbalacing
HI, I have 2 VMs that runs Server 2008 R2 Standard. I have mapped a LUN as RDM to one of the server. Is there anyway i can loadbalance or share the same drive between the servers at the same time using VRTS STORAGE FOUNDATION HA,/DR 5.1 WIN FOR OS TIER ENTERPRISE EDITION STD LIC EXPRESS BAND S thanks Faisal SP