recovering

3778 Topics

Catalogue jobs failed - data inconsistent on each tape?? V-79-57344-33994
Hello, i haveto restore an old backup (created with backup exec 10 i guess). For this restore i use Backup Exec 2010 R3 on Server 2008 R2. There are no entries for this backup in the catalog. So i loaded all tapes for this backup (20x LTO4 containing one backup) in my 24-Slot loader and inventorized them. After that i created catalogue jobs for each tape, starting with the first one. After 2 hours and about 800gb data the job on tape 1 failed with the error (translated): V-79-57344-33994 - Data read from media is not consistent. All other tapes failed with the same error. I can browse the data of the first tape and restore some of the items (others have a red cross). All other tapes are not in the catalogue, so i cant browse them. What i tried: * cleaning drive * checking statistic data for all tapes (0 errors) * Under BE Options > catalogue > disabled request all media in a row (translated) * enabled debugging May the first tape be broken? Is there a possibility to check the contents of all other tapes? I'm doing something wrong? Thanks for your help Andreas Debugging log for a catalogue job: [...] skipped loading tape [0984] 11/19/13 12:22:37 [tpfmt] - Current media tape header was written by "NetVault Domain". [0984] 11/19/13 12:22:37 [tpfmt] - OSF: Got tape one during slow cat. Continuing = false. [0984] 11/19/13 12:22:37 [tpfmt] - TpRead( ): [0984] 11/19/13 12:22:37 [tpfmt] - Error = 0 Req = 65536 Got = 65536 [0984] 11/19/13 12:22:37 [tpfmt] - ReadThisSet( cur_fmt=0 ) [0984] 11/19/13 12:22:37 [tpfmt] - Set 1 was written by version 1.0. [0984] 11/19/13 12:22:37 [tpfmt] - F40_MoveNextDBLK: Proceed -- Assuming this is a DBLK header, but we were expecting a stream. [0984] 11/19/13 12:22:37 [tpfmt] - Recalculation of LBAs disabled for slow catalog of set. [0984] 11/19/13 12:22:37 [tpfmt] - OSF: Found first or lowest known set. runningBSnum = 1. bset num = 1. Continuing = false. [0984] 11/19/13 12:22:37 [tpfmt] - ReadThisSet() return=0x00000000 [0984] 11/19/13 12:22:37 [tpfmt] - Current VCB: ID = 4cdbeb8b Seq = 1 Set = 1 [0984] 11/19/13 12:22:37 [tpfmt] - PositionAtSet( ): TF Msg = b [0984] 11/19/13 12:22:37 [tpfmt] - UI Msg = 8002 [0984] 11/19/13 12:22:37 [tpfmt] - HARDWARE COMPRESSION ===> Compression is configurable. [0984] 11/19/13 12:22:37 [tpfmt] - HARDWARE ENCRYPTION ===> Encryption is supported. [0984] 11/19/13 12:22:37 [tpfmt] - GET_DRV_INF: bsize = 32768 [0984] 11/19/13 12:22:37 [tpfmt] - GET_DRV_INF: preferredBlockSize = 65536 [0984] 11/19/13 12:22:37 [tpfmt] - End of TF_OpenSet: Ret_val = 0x00000000 Buffs = 10 HiWater = 0 [0984] 11/19/13 12:22:37 [tpfmt] - TF read xfer time = 0 seconds. [0984] 11/19/13 12:22:37 [tpfmt] - AbortRead( ) [0984] 11/19/13 12:22:37 [tpfmt] - TF_CloseSet [0984] 11/19/13 12:22:37 [tpfmt] - TF_OpenSet( ) [0984] 11/19/13 12:22:37 [tpfmt] - Requested Set: ID = 4cdbeb8b Seq = 1 Set = 2 [0984] 11/19/13 12:22:37 [tpfmt] - Current VCB: ID = 4cdbeb8b Seq = 1 Set = 1 [0984] 11/19/13 12:22:37 [tpfmt] - GotoBckUpSet( desired=2, this=1 ) [0984] 11/19/13 12:22:37 [tpfmt] - state 0, 1 sets to go [0984] 11/19/13 12:22:37 [tpfmt] - state 1, 1 sets to go [0984] 11/19/13 12:22:37 [tpfmt] - MoveNextSet( cur_fmt=0 ) [0984] 11/19/13 12:22:37 [tpfmt] - MoveFileMarks( 1 ) [0984] 11/19/13 12:22:37 [tpfmt] - TpReadEndSet( ): [0744] 11/19/13 12:22:38 [server] - Updating status for: 'Katalogisieren 00031' (0x8 0x0) [0744] 11/19/13 12:22:38 [server] - Status for: 'Katalogisieren 00031' updated [0984] 11/19/13 12:23:16 [tpfmt] - MoveFileMarks( ) return=0x00000000 [0984] 11/19/13 12:23:16 [tpfmt] - MoveNextSet() return=0xE00084CA [0984] 11/19/13 12:23:16 [tpfmt] - GotoBckUpSet( ) return=0xE00084CA [0984] 11/19/13 12:23:16 [tpfmt] - FreeFormatEnv( cur_fmt=0 ) [0984] 11/19/13 12:23:16 [tpfmt] - End of TF_OpenSet: Ret_val = 0xE00084CA Buffs = 10 HiWater = 0 [0984] 11/19/13 12:23:16 [tpfmt] - TF_CloseSet [0984] 11/19/13 12:23:16 [tpfmt] - Error detected [0984] 11/19/13 12:23:16 [tpfmt] - FreeFormatEnv( cur_fmt=65535 ) [0984] 11/19/13 12:23:16 [tpfmt] - Setting rewind flag to true for older device. This will likely degrade the performance of the current job. [...] skipped unloading tape
Solved
AndreasK
2 years ago Place Backup Exec
2.4KViews
0likes
4Comments
The requested FRS entry is unused
Hello all, I have been stuck on this for a while now with now solution and this problem, so far, has occurred only on one machine. When attempting to recover, in the last few seconds of the recovery I receive an error message: -Cannot copy data from the recovery point to the destination. --The requested FRS entry is unused (free, 0). (UMI:V-281-3215-1010) I was not able to find much help on the web either. Any help would be much appreciated. Symantec System Recovery 2011 Scenario: System A has a recover point created on our central storage. Hard drive of System A needs to be replaced I have the hard drive connected to my system and properly partitioned and attempting to recover using the SSR console note: I have successfully completed this exact same process a few times. This is the first failure.
Solved
EttinH
3 years ago Place System Recovery
1.5KViews
0likes
7Comments
The question of MSEO Encryption and decryption
Hi all, I have a problem about the MSEO(media server encryption option). backup environment like below： DC SITE(MAST BACKUP SITE) Master server: SHAA2SNBU38 Media server:SHAA2SNBU38 first backup data to DD640,then vault to tape in i500. DR SITE(DISASTER RECOVERY SITE) Master server: SHAA2SNBU38(the same DC site master server) Media server: SHAA5SNBU61 backup type like DC SITE Now i have problem: Vault to tape is through encryption by mseo(media server of SHAA2SNBU38).Then i take the tape to DR site and recovery the tape from media server(SHAA5SNBU61) successfully.But the site of DR(SHAA5SNBU61) is out of mseo agent. why it does sucessfully? additional query:Recovery data what backup through MSEO must need media server installing MSEO agent?
____111
4 years ago Place NetBackup
2.2KViews
1like
14Comments
Determine which encryption key was used for a backup.
Recently I discovered that our monthly backup has been using the wrong encryption key. I still have the pass-phrase for the key that was used, so I can recover the data, but now I am wondering how many other month end backups were ran under the wrong key. Is there any way to determine which key was used for a backup? I have searched the job logs (the logs on the server and the ones that were emailed to me), but I cannot find out which key was used. Any advice is welcome. Thanks in advance.
Solved
cyber_saiyan
4 years ago Place Backup Exec
481Views
0likes
3Comments
My computer caught fire…
I was advised to repost this topic here by Symantec... All I have got left is the external drive, (USB, 1000 GB), containing the backups. I wasn't unduly worried – after all this is why you have backups isn't it? The computer was fairly old and had two IDE drives with Windows 7 and a matching motherboard with an older type of RAM. The backup was made with Ghost 12 – I had no idea that it had become obsolete. I bought a new computer with two SATA drives. Apparently IDE drives and matching motherboards boards are no longer made. I booted from the SRD but the machine couldn't see the USB drive. I installed Windows 7 and then it could see the USB drive when I booted from the SRD. I told to restore the C drive after which it wouldn't boot from the drive. I subsequently chatted with Symantec support who told me that if I installed the appropriate Ghost application on the new machine it would be possible to restore from my USB drive. The agent insisted that in the whole of Symantec there was not a single remaining copy of any version of ghost… I managed to find a "Try and buy" copy of Ghost 15. Will this work? If not what can I do? The chatline agent did not know the answer to these questions and referred me to this forum. David
cgaski3
4 years ago Place System Recovery
3.9KViews
0likes
27Comments
How to restore SAP HANA database to different client with different db name
Hi All, I am trying to restore an SAP HANAdatabase ABC onclient1 to database DEF on client2. I can restore ABC to ABC on client1 without any issue. But when I try to restore ABC on client1 to DEF on client2, I am getting "No data backup found" error in SAP HANA Studio. Did anyone do this kind of restore? Netbackup version: 7.7 Regards.
Solved
evo
5 years ago Place NetBackup
8.9KViews
0likes
10Comments
shutdown and restart Cluster with VEA
Hi all, I have to shutdown our Hardware for a while. Now I'm looking for the best way to do that. I have two storage SAN's connected to two hardware micosoft clusternodes(Windows Server 2003) with VEA 3.2. I will shutdown the sytsems this way: 1. passive Cluster node 2. aktiv cluster node 3. first san controller 4. second san controller 5. both storage's 6. FB switche and the restart this way: 1. FB switche 2. both storage's 3. both storage san controller 4. both cluster node's Are there any things i have to regard? Do the VEA start the to resync after the restart for hours? or it will only reconnect. I hope you can help me. Thank you!
mghomer
5 years ago Place Storage Foundation for Windows
1.8KViews
0likes
3Comments
moving data from unused area
Hi, I'm wondering what exactly SSR2013 is doing when it's at 99% done and stalled seemingly forever at "Moving data from unused area?" There's no indication of how long this will take, and I'm just sitting here thinking of things to do. I can't really leave the system for any length of time because it might finish the crive copy at any moment. So I'm just stuck here grumbling. What I can't understand is what data there is in an unused area. If it's unused, then why is the date important to me, and why do I have to wait interminably while it is moved? Why can't there be some kind of progress indicator so I can know where I am in the process? GaryK
Gary_Karasik
5 years ago Place System Recovery
3.3KViews
0likes
20Comments
SSR 2011 Symantec System Recovery Disk ISO download
I have SSR 2011 installed and would like to create a System Recovery disk, but i don't have the ISO. I know there's a download for that and I've seen a location for a 2013 version, but I assume I need a 2011 version. Where can I download one? Thanks, Rob
RFlum
6 years ago Place System Recovery
13KViews
1like
15Comments
Bare Metal Restore best practices and recommendation?
Dear All, We want to take the image of the whole operating system for Windows 2008 & windows 2003, unix & Solaris clients by using the Netbackup 7.0. We have nearly 100 clients having different operating systems and with 32 & 64 bits. To take the operating system image, We are going to implement the BMR(Bare Metal Restore). Please guide me the simplest and easy way, how to use the BMR. Do we have to arrange a dedicated server for the BMR, OR, we can use our netbackup master server to have the BMR? Which one is the best for us? Please tell me the best practicesand the concerns if any for the implementation of the BMR. Bundle of Thanks.
Solved
qiblatain
6 years ago Place NetBackup
4.2KViews
0likes
28Comments