Drives disappeared in NetBackup
I'm running Solaris 11 and NetBackup 7.7.2 and have recently had my robots and drives stop working. When i go to "UP" the drives they appear to come up and then immediately fail. The drives themselves are Storagetek SL150s and they are not showing any errors and are at 3.74 firmware version. On the servers, when i run the scan command this is the output on both systems: ****************SDT_TAPE************************* ********************************SDT_CHANGER******************** and no devices are displayed. I ran tpautoconf -a and got no feedback. When I opened the GUI and tried to reconfigure the storage devices it founf the robot and tape drive but I still can't bring them UP in the gui. Due to the nature of the servers I can't upload logs. Thanks
Unable to configure robots for Master Server
Hi All, We are new to the netback up set up in our Business unit and We are setting up netback up in an isolated network from the existing master server + robotic server At the moment we have done the below set ups and stuck in where we are unable to configure the robotic server which is on another network. Current running set up:- BU-01 Master , media , nb client running on windows platform in Nertwork A Tape library robotic (TLD)running and configured on this master server which is on san switch zoning. BU-02 Added expansion slot (4 drives) to the existing tape library and connected to the master server directory using qlogic card Installed master, media & NB client (netbackup 8.1.1) on centos 6.9 in network B Could you advice what could be the issue as why we are unable to see the robotic arm in network A in to Network B master server in order to set up further configuration in netback up. Could someone please advice and help us here ? Is it possible to configure 2 Master servers (different network) for one tape library? Thanks, SG