the infamous ralus agent with lib load errors on SLES
Hi, I installed ralus agent 20.4 on a fresh SLES 15. Install went trhough without error. Ran a test backup and that says success on BE Server. Yet When I start ralus agent with sudo ./beremote --log-console & I get NDMPDMainThreadFunc spawned: grpid=1, tid=-2123458816 : FS_InitFileSys : libbedsnt5.so could not be loaded: 0x 2 (2) : libbedssql2.so could not be loaded: 0x 2 (2) libbedsxchg.so could not be loaded: 0x 2 (2) : libbedsxese.so could not be loaded: 0x 2 (2) : libbedsmbox.so could not be loaded: 0x 2 (2) : libbedspush.so could not be loaded: 0x 2 (2) : libbedsmdoc.so could not be loaded: 0x 2 (2) : libbedssps2.so could not be loaded: 0x 2 (2) : libbedssps3.so could not be loaded: 0x 2 (2) : libbedsupfs.so could not be loaded: 0x 2 (2) : libbedsshadow.so could not be loaded: 0x 2 (2) : libbedsoffhost.so could not be loaded: 0x 2 (2) : loaded libbedsvx.so Do these have to be loaded for ralus to work properly ? I searched and found quite a few fellow-ralus-experimenters with the same log entries but I havent found anyone who successfully got rid of them. then further down: libbedssmsp.so loaded at index 11 libbedsra.so could not be loaded: 0x 2 (2) libbedsdb2.so could not be loaded: 0x 2 (2) libbedsvmesx.so could not be loaded: 0x 2 (2) Initializing FSs FS 1 failed to initialize: 0xE000FE46 Do I need the FS 1 initialized for ralus to work properly? Oh and Veritas engineers, could you consider compiling ralus for more linux distros ? thanks chris