VCS 6.2 Agents for Adabas and MariaDB
Hi colleagues, For a customer I have to integrate two seperate databases into VCS 6.2 running on Oracle Linux. However I have no experience with both of them. And I could not find anything on SORT. Could someone point me to the right direction regarding the VCS Agents? MariaDB The first one is MariaDB. However I can not find anything about MariaDB together with VCS. As I found out MariaDB is a spinoff from MySQL since the Oracle/Sun merge, it's very simular to MySQL. Does this mean I can use the same datbase resource as one would use for MySQL? Or is there a sperate one? I assume MariaDB works seemless with VCS 6.2, since I saw this Release Note of SFHA 6.2 stating "Performance improvements forMySQL and MariaDB applications". So I would guess it works great, but I can not find any Agent. Source: https://www-secure.symantec.com/connect/sfha62 Adabas The other database to integrate is Adabas (from Software AG). From what I learned from Google, I see there was a Partner Agent for VCS 4.1 MP1, but only for Solaris on SPARC or Solaris on x86. But no Linux. That is confirmed in the lit of Partner Agents in the "vcs_agent_support_matrix" spreadsheet (only Solaris on SPARC or x86, but no Linux). I also found a Symantec Article about an issue with the Adabas Agent for VCS 6.1 on SPARC/Solaris, but I can not find the Linux Agent on SORT. According to this Symantec Article the Agent should be released under the STEP (Symantec™ Technology Enabled Program). Source: https://support.symantec.com/en_US/article.TECH60665.html But when I look on SORT at the Agents for STEP, no Agents are listed. Source: https://sort.symantec.com/agents/detail/1142 The manufacturer, Software AG, also has a Wiki page dedicated to Adabas with VCS. But no info regarding the Agent. Source: https://techcommunity.softwareag.com/pwiki/-/wiki/Main/Using+Veritas+to+Enable+Adabas+High+Availability Any tips or links to the correct Agents? Thanks in advance, Sander FiersSolved1.1KViews0likes2CommentsIntegrating SAP with VCS 6.2 (on Oracle Linux 6.5)
Hi, I was wondering if someone has some additional information regarding how to setup my cluster... I have both VCS (inclusing Storage Foundation) and Linux knowledge. I do however have no background in SAP. And as SAP is a very complex product, I can not see the forest because of the trees... Setup 2 node (active-passive) cluster of Oracle Linux 6.5 nodes. Veritas Storage Foundation HA (= VxVM + DMP + VCS). Oracle 11.2 as database. SAP ECC 6.0 Apart from the Installation & Configuration guide on the SAP NetWeaver Agent, I found little information about implementing SAP in VCS. Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2". But unfortunately I can not find a howto, guide or whatever from Symantec, nor from the usual Google attempts. My customer is however also not very SAP knowledged. From what I understand it is a very basic SAP setup, if not the simplest. They are using SAP ECC6.0 and an Oracle 11.2 database. So I assume they are just having a Central Instance and the Database. After some Google resource, I found out that SAP ECC 6.0 is technically a SAP NetWeaver 7.0. On Symantec SORT, I found 3 versions of SAP NetWeaver. I downloaded the first one, as the descripton says: SAP NetWeaver SAP NetWeaver 7.1, 7.2, 7.3, 7.4 SAP NetWeaver 7.1, 7.3 Agent: SAPNW04 5.0.16.0 Application version(s): SAP R/3 4.6, R/3 Enterprise 4.7, NW04, NW04s, ERP/ECC 5.0/6.0, SCM/APO 4.1/5.0/5.1/7.0, SRM 4.0/5.0/7.0, CRM 4.0/5.0/7.0 Source: https://sort.symantec.com/agents/detail/1077 SAP ERP 2005 = SAP NetWeaver 2004s (BASIS 7.00) = ECC 6.0 Source: http://itknowledgeexchange.techtarget.com/itanswers/difference-bet-ecc-60-sap-r3-47/ Source: http://www.fasttrackph.com/sap-ecc-6-0/ Source : http://wulibi.blogspot.be/2010/03/what-is-sap-ecc-60-in-brief.html Currently I have this setup unfinshed: Installed & configured Storage Foundation HA on both nodes. Instaled the ACC Libraries on both nodes. see: https://sort.symantec.com/agents/detail/1183 Installed the SAP NetWeaver Agent on both nodes. see: https://sort.symantec.com/agents/detail/1077 Configured next to the CusterServiceGroup, 3 Service Groups: SG_sap the shared storage Resources: DiskGroup + Volumes + Mount. the SAPNW Agent Resource. SG_oracle the shared storage Resources: DiskGroup + Volumes + Mount the Oracle Agent Resurce. SG_nfs still empty. SAPNW Agent. SAP instance type The SAPNW Agent documentation states: The agent supports the following SAP instance types: Central Services Instance Application Server Instance Enqueue Replication Server Instance. Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2" But I guess the SAP ECC 6.0 has them all in one central instance, right? So I only need one SAPNW Agent. How is the SAP installed: only ABAP only Java add-in (both ABAP and Java). Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2" I have no idea. How can I find this out? InstName Attribute Another thing is the InstName Attribute. This also does not correspond with the information I have. My SAP intance is T30. So the syntax is correct more or less, but it isn't listed below. Which is important also to decide on the value for the ProcMon Attribute The SAPSID and InstName form a unique identifier that can identify the processes running for a particular instance. Some examples of SAP instances are given as follows: InstName = InstType DVEBMGS00 = SAP Application Server - ABAP (Primary) D01 SAP = Application Server - ABAP (Additional) ASCS02 = SAP Central Services - ABAP J03 = SAP Application Server - Java SCS04 = SAP Central Services - Java ERS05 = SAP Enqueue Replication Server SMDA97 = Solution Manager Diagnostics Agent Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2" In the listing of the required attributes it is also stated. However, the default value is CENTRAL. I guess this is correct in my case? InstName Attribute: An identifier that classifies and describes the SAP server instance type. Valid values are: APPSERV: SAP Application Server ENQUEUE: SAP Central Services ENQREP: Enqueue Replication Server SMDAGENT: Solution Manager Diagnostics Agent SAPSTARTSRV: SAPSTARTSRV Process Note: The value of this attribute is not case-sensitive. Type and dimension: string-scalar Default: APPSERV Example: ENQUEUE EnqSrvResName Attribute A required attribute is the EnqSrvResName Attribute. The documentation says this should be the Resource Name for the SAP Central Instance. But I am assuming I only have a SAP Central Instance. So I guess I should use the name of my SAP Agent Resouce from my SAP Service Group? EnqSrvResName Attribute: The name of the VCS resource for SAP Central Services (A)SCS Instance. This attribute is used by Enqueue and Enqueue Replication Server. Using this attribute the Enqueue server queries the Enqueue Replication Server resource state while determining the fail over target and vice a versa. Type and dimension: string-scalar Default: No default value Example: SAP71-PI1SCS_sap Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2" Is anyone able to help me out? Thanks in advance.Solved2.4KViews2likes9Comments
6.0.5 install w/all patches
Hi Forum Friends, I need some help installing SFHA with all patches included. I wanted to know if there is a way to install all of these below in the same command? The Sort installation report shows I need these patches Patch Date Size cpi-6.0.1.1100 2015-01-06 18.5 KB cpi-6.0.5.300 2015-01-05 7.98 KB sfha-rhel6.6_x86_64-6.0.5.200 2014-12-18 34.14 MB fsadv-rhel6_x86_64-6.0.5.200 2014-11-25 3.85 MB odm-rhel6_x86_64-6.0.5.100 2014-09-10 295.95 KB sfha-rhel6_x86_64-6.0.5 2014-04-15 194.48 MB To install in a single shot sfha-rhel6.6_x86_64-6.0.5.200says to run something like this. You can also install this patch together with 6.0.1 GA release and 6.0.5 Patch release # ./installSFHA605P2 -base_path [<601 path>] -mr_path [<605 path>] [<host1> <host2>...] So how do I get the rest installed is there any extended commands I can use to include in this to get them all done in one shot? I am open to using just installmr with -base_path and other switches as well. What ever would do it. I plan on using a response file btw. Thanks BrosSolved972Views1like2Comments
Unable to add user parameter while configuring Apache Agent
Im Using VCS 4.0 on linux. Cluster Manager : 4.4 Cluster Server : 4.1 When im trying to Do "Import Types" and import vcsApacheTypes.cf , I dont see user parameter here!. Moreover , If i try to manually add a User parameter that doesnt work either. Please let me know how to configure an Apache agent so that the apache process starts with a specified user, instead of root user where i installed VCS.Solved1.6KViews0likes9Comments
Faint on caculating total files of a big VxFS filesystem,any good idea?
There is a VxFS with about 140,000,000 files. Run in Suse 10 sp3. First I use "df -i",I got the inodes used is about 140,000,000. Then I delete about 40,000,000 files,and "df -i" again,but got about 190,000,000 inodes used. After five days,"df -i" still got about 140,000,000 inodes used and never reduce any more. There are two problems: 1,The inodes used not means the total files,is there any way to get the total files exactly and quickly? 2,The "df -i" has a problem just mentioned above.Is it a problem of VxFS or Suse linux 10 sp3? Thanks for you patients to read above! Thanks a lot for those who give me an answer.Welcome to China andyou will deservedgood Chinese meal.Solved654Views0likes2Comments
