SSR 2011 - VProConsole Error
Hi Community, wir versuchen es mal hier im Forum. Wir bekommen bei einem Kunden seit kurzer Zeit immer diese Fehlermeldung, wenn wir die Console starten wollen. Hier die Fehlermeldung: __________ Details Daten System.Collections.ListDictionaryInternal Innere Ausnahme Unbekannter Konfigurationsabschnitt "runtime". (C:\Program Files (x86)\Symantec\Symantec System Recovery\Console\VProConsole.exe.Config line 3) Meldung Das Konfigurationssystem konnte nicht initialisiert werden. Quelle System.Configuration Stapelverfolgung bei System.Configuration.ClientConfigurationSystem.EnsureInit(String configKey) bei System.Configuration.ClientConfigurationSystem.PrepareClientConfigSystem(String sectionName) bei System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName) bei System.Configuration.ConfigurationManager.GetSection(String sectionName) bei System.Configuration.PrivilegedConfigurationManager.GetSection(String sectionName) bei System.Diagnostics.DiagnosticsConfiguration.GetConfigSection() bei System.Diagnostics.DiagnosticsConfiguration.Initialize() bei System.Diagnostics.DiagnosticsConfiguration.get_IndentSize() bei System.Diagnostics.TraceInternal.InitializeSettings() bei System.Diagnostics.TraceInternal.get_Listeners() bei System.Diagnostics.Trace.get_Listeners() bei dotNetBase.TextLogger.StartListening() bei dotNetBase.TextLogger..ctor(TraceSwitch Switch, String AbsoluteLogFileName, Int32 MaximumLogFileSize) bei dotNetBase.TextLogger.InitInstance(TraceSwitch Switch, String AbsoluteLogFileName, Int32 MaximumLogFileSize) bei Symantec.VPro.VProUI.ProtectorUtils.InitDebugging(String sDebugFilename) bei Symantec.VPro.VProConsole.Program.Main(String[] args) Ziel-Site EnsureInit __________________ Reparatur des Programms hat keinen Erfolg gebracht. Windows- und Symantecupdates sind alle installiert. Hat vllt. noch jmd. ein paar Lösungsansätze oder gar Lösung parat? Danke im Voraus. :) Gruß Maaß IT
SSR 2013 R2 - Email report/result not in language
Hi i have an ssr install which for some reason has gone completely weird. When ssr finished i get it to email the result for monitoring purposes. However for some reason it now doesn give me anything that says sucess or failed. heres an example: Date: 06/09/2015 11:55:00 Notification Type: Info Priority: High Description: Result (0x6c8f1f7a 27 VPRO_INFO_MANUAL_BACKUP_INC Args [1] Arg (0xbab000d 3 C:\);)<9 1.0-*-*-* > example 2: Date: 06/09/2015 11:54:59 Notification Type: Info Priority: High Description: Result (0x6c8f1f7a 27 VPRO_INFO_MANUAL_BACKUP_INC Args [1] Arg (0xbab000d 3 *:\);)<9 1.0-*-*-* > I know its sucessfuly due to it saying so on the server but how can i make this go back to normal. I have tried a repair and it still doing the same. thanks
Symantec System Recovery 2013 R2 MS with different ssr client
Hi, I useSymantec System Recovery 2013 R2 Management solution.Several product versionare managed (10.0.1.xxxx, 11.0.0.xxxx, 11.0.2.xxxx, 11.1.0.xxxx). And several licence are used (SSR 2011, SSR 2013,SSR 2013 R2). Sometimes, I see a good status of the clients (BackedUp)butthe status is false because one of the disk isnot backuped. How resolve this issue ? I find thisproblem onlyfor the old versions of ssr clients. Thanks a lot
First Backup image to external HDD getting Error ED800012 SSR 2013
Hello All i have a problem with one home user using SSR 2013.We have a policy for home users to execute a backup job at 12:45 each day to an external HDD. it works fine except for one user that is getting the bellow error each time. Error EC8F17B7: Cannot create recovery points for job: LOCAL USB. Error ED800012: The internal structure of the recovery point file (CRC Validation) is invalid, damaged or unsupported. any ideas?
How to restore an backup of system after re-installing windows
Hi, I installed Symantec System Recovery backed up my system. It produced a file\folder package as seen in the attachment (capture001.png). I then restored my system to factory defaults This is esentially a complete re-install of windows from a recovery partition I then did the experimentation that I needed to do with "fresh" system I then re-installed Symantec System Recoveryand was looking to restore back to the original backed up version, but am not sure how to do that. The obvious route of using "Recover my Computer" is intended for when the backups have been taken on the same system. In my case I've done the windows re-install in between so obviously in that table there's no backups listed. Then I thought there must be a way to import the backup I have stored (capture001.png) There'sRecover my Computer\Tasks\Custom recovery option which brings up a wizard that requires to provide a single recovery point filename and expected filetype is V2I In my backu upfolder I have 3 of those (I asume tehre were 3 partitions backed up in the process of doing full system backup) So which one should I pick? (Capture002.png) Should be the C Drive I suppose, but I'm not sure. I wonder if there's some magic way to restore all 3 of the files at the same time? Also if I'm restoring the C: should I be choosing all of these options (Capture003.png) ? How would this restore work if I'm restoring the system of which I'm currently running of? Does it reboot and then do some magic before windows has loaded? Surely windows c drive cannot be overwritten while OS is runing of off the same drive. Any advice would be helpful. Thanks
System Recovery 2013 not running backups
This has been king of a pain to diagnose. Basically, the system is not running backups on schedule. I can run them just fine manully but the are not running at the scheduled time for the backup. There are no log messages in either System recovery or in Event Logs. Any information would be helpful. Thanks, KarlProblème de customization du recovery disk
Bonjour, voici notre problème, serveur DELL T630 sous Windows 2012 R2 (en français), logiciel Symantec System Recovery 2013R2. Le logiciel fonctionne bien interface "en bon Gaulois", mais lors de la création du recovery disk sur DVD ou en iso, lors de l'étape de personalisation de la langue, SEUL le "Deutsch" est disponible ! Impossible de changer la langue, pour lesysteme et le clavierles listes de choix ne comportent que le Deutsch. Cela crée donc un reboot en Allemand, n'étant pas "Germanophile" c'est plutôt embarrassant... Comment ajouter des langues à ce choix? D'où vient t-il? DLL ? EXE ? Merci de votre expertise...