SSR Backups constantly fail
I am running SSR2013 on a Windows2012R2 server trying to back up the two local drives to a NAS device with a shadow copy to a USB drive but it costantly fails with the following: --Unable to write to file. ---Error EBAB03F1: Following Operating System error occurred while performing requested operation: 'An unexpected network error occurred.' ---Unable to set file size. ----Error EBAB03F1: Following Operating System error occurred while performing requested operation: 'An unexpected network error occurred.' (UMI:V-281-2001-31) I have checked the following: There is enough hard drive space on the NAS All of the permissions are correct There are no obviously associated event log entries The job starts and creates three ".tmp" files for the bakup of C: and up to 4 ".tmp" file for X: and then it fails. There were about 21 ".tmp" files for the X: drive the one and only time it worked and the system is set to split the files at 9.4GB in size. The server is hosting two Hyper-V guests and the VHDX files are on the X: drive. The annoying thing is that the backup worked once last week (running a base backup) and then we had two differentials as well but this week absolutely nothing will work. I have set it up to create a new base backup each week with Diffs every other day (mon-fri) If anyone has any ideas please let me know.
Ajuda para restaurar backup sem ponto de recuperação
Olás amigos. Preciso de uma ajuda. Em meu servidor o ponto de recuperação foi perdido e o backup todo está em formato *.fbf Como restauro esses arquivos de backup? Uso Bkp Exec 2010. Obrigado!! Hellos friends. I need help. In my recovery point server was lost and the entire backup is in * .fbf How do I restore these backup files? Use Bkp Exec 2010. Thanks !!
First Backup image to external HDD getting Error ED800012 SSR 2013
Hello All i have a problem with one home user using SSR 2013.We have a policy for home users to execute a backup job at 12:45 each day to an external HDD. it works fine except for one user that is getting the bellow error each time. Error EC8F17B7: Cannot create recovery points for job: LOCAL USB. Error ED800012: The internal structure of the recovery point file (CRC Validation) is invalid, damaged or unsupported. any ideas?
Snapshot error when running My Documents backup
Symantec System Recovery 11 (10.0.1.41704) stops with the following error: Following error seen (always) when running My Documents backup. -Snapshot error %1. --Error EBAB03F1: OS error 2147754774. (UMI:V-281-1975-5) Following is the entry in the log file: 2/19/2015 10:33:13 AM High Priority Info: Info 6C8F1F64: The file and folder backup job, My Documents Backup, has been started manually. 0x00 (Symantec System Recovery) 2/19/2015 10:33:18 AM High Priority Error: Error EC8F1C50: Cannot create file backup for job: My Documents Backup. Error E7B70005: Snapshot error Error EBAB03F1: OS error 2147754774.. 0xE7B70005 (Symantec System Recovery) (UMI:V-281-3215-7248) I tried the workaround SSR suggested (http://www.symantec.com/business/support/index?page=content&id=TECH125517&actp=search&viewlocale=en_US&searchid=1424372034661), but that didn't fix the error. If anyone knows of workaround/fix, please share the same -- it would be of great help. Thanks in advance, _SunilHow to restore an backup of system after re-installing windows
Hi, I installed Symantec System Recovery backed up my system. It produced a file\folder package as seen in the attachment (capture001.png). I then restored my system to factory defaults This is esentially a complete re-install of windows from a recovery partition I then did the experimentation that I needed to do with "fresh" system I then re-installed Symantec System Recovery and was looking to restore back to the original backed up version, but am not sure how to do that. The obvious route of using "Recover my Computer" is intended for when the backups have been taken on the same system. In my case I've done the windows re-install in between so obviously in that table there's no backups listed. Then I thought there must be a way to import the backup I have stored (capture001.png) There's Recover my Computer\Tasks\Custom recovery option which brings up a wizard that requires to provide a single recovery point filename and expected filetype is V2I In my backu up folder I have 3 of those (I asume tehre were 3 partitions backed up in the process of doing full system backup) So which one should I pick? (Capture002.png) Should be the C Drive I suppose, but I'm not sure. I wonder if there's some magic way to restore all 3 of the files at the same time? Also if I'm restoring the C: should I be choosing all of these options (Capture003.png) ? How would this restore work if I'm restoring the system of which I'm currently running of? Does it reboot and then do some magic before windows has loaded? Surely windows c drive cannot be overwritten while OS is runing of off the same drive. Any advice would be helpful. ThanksSSR 2013 PreSnap failed
Hello, I have problem with backups on some of computers in our network enviroment. I have tried everithing what found on Symantec Connect but nothing helps for these three computers. I have tried restart, disable UAC, delete and restore registy records for SSR and nothing helps. For other 25 computers I don't have such a problem. Here is error which I see. Does anyone have something in mind what can be possible reason for error ?
Mr
Hi, Running Windows 8.1 sp2 x 64bit. Since updating to SP2 I find that each time I run a Windows Update I lose all the SSR2013 backups in the Status report and the tray icon has a red "x" in it. All the backups are present on the backup disk its just that the status report cannot see them. If I run the backup in SSR2013 again the latest backup shows up and all is well until I have to run a Windows update. Can anyone assist? Regards JJF1312
