Boot Wizard and USB
Symantec, I just purchased a few Optiplex 9030 computer with an Intel 1217 Ethernet Network Drivers The goal is to create a bootable USB using Ghost Boot Wizard. So I followed these instrutions video http://www.symantec.com/connect/videos/adding-nic-and-sata-drivers-windows-pe However, I am not able add the drivers into the database; consequently, creating a bootable usb. I keep getting this error: Failed to import driver, Failed to find any drivers to add. I looked in your support track but not finding a solution Ideas ? the files where extracted: When extracting the Intel drivers I get only 3 files a MUP Package and Setup ??? Why cant we add drivers ??? OR
DLO 8.0 Configure IO
Hey guys, I've installed DLO 8.0 on a fresh MSW2008R2, configured the Storage Location and the Edge Server, but when i try to configure the IO Server i'm getting this: All the ports are opened and the firewall is turned off. The IP is local. I've check the DLO manual and nothing. Any ideea ?
Move DLO storage to new location on VM's
Hi. First post, so please be gentle ;-) Current configuration. We have a Windows 2008 server running DLO7.5 with about 900 users (lets call it SRV-A), this server does NOT hold the user backup data. All data is backed up via a share to another server, lets call the other server SRV-B) Both SRV-A and SRV-B are VM's running on the same ESX We want to get rid of SRV-B as it happens to be running Windows 2003, so need to get rid of it. As there is quite a bit of storage datasets involved we wanted to avoid trying to copy the data. The user storage is held on a number of datastores\drive letters\shares on SRV-B we want to move one by one, just in case it goes horribly wrong. Our approach was to disconnect the storage datastores from SRV-B and attach to SRV-A, then just go on the DLO console and change the location to point to the new local storage which has the data already there. Simple we thought. We set up a small piece of test storage, added a user, performed so backups then moved the storage. Storage came across OK and permissions were not as they were but we can amend. Went onto the DLO server create the new storage location, that worked OK. We then tried to use DLO console to move the user (we did think a simple change in "automated user assignments" would help but it didn't.) we got a message that this wasn't possible "Authentication failed for source storage, Error. The Device is not connected" Obviously as we have moved the source!! But there is an option to reassign if the server will be permanently unavailable, which it wont be as we have moved the storage so we click yes. Failed again as the data was already there. "Destination network user data folder already exists"!! Help: Hopefully the above explains what we are trying to do, I have seen others on the forum with similar requests but not seen any answer. I am hoping there is a simple way to do this and maybe we have missed a step, copy the data with DLO is not a good option as we would temporarily need twice the storage and there is a lot of it 5TB+. Cheers.Win server 2012 DLO 7.5 migration
Hi All, I have been following this article (https://support.symantec.com/en_US/article.TECH217373.html) to migrate our DLO 7.5 to a new server (both on server 2012). I have managed to get all the way to the point 12 (12) On the old Server use the following command line utility to move all clients to the new media server. From a CMD prompt from the Symantec DLO folder: DLOCommandu -ChangeServer -M <media server> -A (Where <media server> is the name of the new Media Server) So i run the following in an administration cmd window: "C:\Program Files\Symantec\Symantec DLO\DLOCommandu.exe" -ChangeServer -M APP01 -A But i get the following result for all users: Failed to post media server notification change to <domain>\<user> Error=0x43 I have tried disabling the firewall's and AV's both ends to no avail, so any and all help is greatly appreciated. Mark.DLO backing up too many data
Hi everyone, We're in the process of implementing DLO 7.6 for the first time. We've created a new backup selection with the folling settings: and made the folllowing selections: For whatever reason, DLO is backing up the selected files and lots more: Can anyone explain me, why this is happening and what I can do to disable the backup of all those files? The setting "Enable message level incremental backups of Lotus Notes E-mail files" is disabled. Thank you in advance, Caroline
