NBU client installation is getting failed on Linux machine.
While installing the NBU client binaries on Redhat Linux machine getting library file issue. Error :- error while loading shared libraries: libacl.so.1: cannot open shared object file: No such file or directory tar failed unpacking /tmp/bp.27062/bin_net.tar on . Cannot complete the client install. client_config_failed # uname -a Linux XXXXXX 2.6.32-279.el6.x86_64 #1 SMP Wed Jun 13 18:24:36 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux I need experts suggestion here what can be done to get this resolved.Solved1.6KViews0likes2CommentsHP Tape device is detected as Disk device type in solaris machine.
Hi All, Need one hep from all experts here. one of tape drive from HP ESL library is connected to Solaris server and it is detecting as Diskdevice not as tape device. actaully it should be tape devices as it is physical tape drive. Pos Port_ID Hard_Addr Port WWN Node WWN Type 0 150200 0 2001001321443ed4 2000001321443ed4 0x1 (Tape device) 1 150300 0 2004001321443ed4 2003001321443ed4 0x0 (Disk device) 2 158500 0 200d001321443102 200c001321443102 0x1 (Tape device) cfgadm O/P:- c8::2004001321443ed4 unavailable connected configured unknown need experts suggestions here what can be done to get this done. or anyone faced this kind of issue. Thanks MaheshSolved993Views0likes2CommentsMy backup job to robot tapes ended up with status=96
Hi My backup jobs that backup to robot has ended with exiting [status=96unable to allocate new media for backup, storage unit has none available] I think it may be cause by tape's labels because it didn't have a problem before I change my label with the new one I used the commandavailable_mediato check out all tapes but all of it areavailablestatus with new label's barcodes. Could someone help me? Thank youSolved588Views0likes2CommentsMail Alert for exchange servers
How can I configure mail alert for exchange server backups status with following details Exchange server name along with the storage group detail as I need to confirm each storage group backup started as per schedule. My Master server was Linux and Netbackup version was 7.5 is there any possible was to run script to call the storage group detail from NBU master server.Solved1.6KViews1like5CommentsTape replacement from net backup admin console.
From symantec netbackup 7.0.1 NBU console we are able to eject the tapes but they are not reaching the CAP from where we can replace the tapes. please suggest there is any other console like from where we can do it? Provide alrternate steps to eject the tapes the tape library model no is HP-UX storage tek SL500Solved814Views0likes2CommentsNetBackup - DataDomain (VTL) replication
Hi, Attached is a diagram of the backup environment. The back up of all the clients are performed in the local site, they're stored in the DataDomain (VTL). The historical backups are duplicated to tape and send them out. For the critical data, it is required to have a second copy of the backup. Due to the RTO established, it's not practical to save this second copy in tape and stored in a vault. So then, the second DataDomain (VTL) was installed in a remote site to replicate a pool of virtual tapes containing the critical backups. In the remote site, there is a media server to control the VTL. At this point, the second VTL is already configured like a storage unit and the virtual tapes are replicated and syncronized, but they can not be added because the duplicated media label. I'm exploring the idea to deploy a master server in the remote site to replace the media server... I need help to tie up the loose ends to make this solution works. Which could be the best way to integrate the DataDomain replication with NetBackup and take advantage of it with no need of new licensing? Btw,NetBackup is licensed per TB.2.2KViews1like6Comments