Appliances

Resolved! configure Flex Appliance 5250

Hello all, I have a project to configure a Flex-Appliance. The documentation is not very clear, is it possible to guide me a bit so I can configure the box myself? I did configure non-flex-appliances, but the flex ones are rather different.Regards, R...

Netbackup 5240 Appliance change backup network

HelloWe have 8.1.2 Windows Master and 3.1.2 5240 Appliance. Appliance with L config. Until this time we were using eth1(1g). We plug FC(eth7 10g) etherhet card and assing IP on it. Ip config:eth1 192.168.1.73/24 GW:192.168.1.254 eth7 1291.68.1.79/24 ...

NetBackup 5240 appliance with tape via Fiber

Hello,I have a NetBackup 5240 appliance and I want to configure tape backup. I have connected the tape library to slot 6 port 1 (initiator) via 8GB fiber (does not go through SAN switch but directly connected to the appliance). I then ran Manage > Fi...

Bandwidth limit when configuring air

hiCurrently, I have two net backup appliances, one for backup and the other for DR.However, the network bandwidth in between is too narrow, so bandwidth must be limited, but I have not been able to find any related data.Please help from many people.

Appliance 5340 Disk Pool Limit I/O Streams per Volume recommendation

Hi,Please your recommendation: we have two 5340 appliances (1.4TB RAM, 2 primary/expansion storage shelfs = 980TB), what is the Disk Pool Limit I/O streams recommended? we actually have 120 per volume and our SLPs are waiting for resources. Our WAN h...

Lenovo Server with Veritas Net Backup License

Dear Team, kindly advise which Lenovo server is compatible with Veritas Net backup license. i need server of 36 TB, i need use Veritas Netbackup License with Lenovo Hardware

about Auditing the NetBackup admin account

Hi all,Auditing the NetBackup admin account in the NetBackup Appliance Administrator's Guide shows the output when I run the bbps command, but not in my validation environment.https://www.veritas.com/content/support/en_US/doc/75895731-141133026-0/v90...

Compliance questions

We are using NetBackup 5240 and 5250 appliances. In one of the compliance meetings I was asked to provide below details . Can someone help with those please.Multi factor authentication to backup systems/appliances?Are backups stored on disks/tapes im...

Netbackup Offsite backup

hi, I have two identical NBU Appliance 5250. Need to configure additional backup copy (secondary copy) to offsite. I wish to use Windows VM and install NBU Master and Media server on offsite location. Secondary copy will be configure on each applianc...

NetBackup Appliance 5250 versus NetBackup Flex Appliance 5250

Hi All,I would appreciate if someone can help me in order to propose the righ appliance to the customer: when we would had to propose a NetBackup appliance 5250 and when NetBackup Flex appliance 5250. Thank you very much for your help.Best regards, ...

Resolved! Monitor Veritas appliances using kpi

Hello Voxers, We are trying to monitor a Veritas appliance using PRTG Network Monitor as a monitoring tool. My questions are the following: Is this possible? can we monitor the disks of a veritas appliance using OIDs? What are the minimum rights for ...

Rename this Forum

Can we please rename this "Appliances" forum to "Flex Appliances" and create a new "Access Appliances" forum. Thanks.

Flex instance upgrade package for version 8.3 needed.

We have flex appliance model is 5340 and appliance OS version is 2.0. We have media server instances on the flex appliance(both msdp and cloud catalyst) at version 8.2. We are going to upgrade the flex media server instances to version 8.3 . But I ...

Veritas Flex Appliance with Netbackup 8.3

Hi,we have configured an media server's instance on flex appliance 5340, with Netbackup 8.3.Outside there is a master server also 8.3. In order to add clients, and populating file hosts on media server, we read to manual configuration that we must of...

new appliance 5250

new appliance 5250 rack and stack done in DC. IPMI console ip set and configured. appliance version is at 3.2. This one is 4th appliance purchased. I already have a unix master(rockwell 8.2) and 3 more appliances already running as media server (most...

Migration Netbackup Appliance 5230 to New Netbackup Appliance 5250

Good Afternoon!We want to know how to migrate a 5230 appliance (Master / media) to a new 5250 appliance? Currently the 5230 has NBA 3.1, PureDisk (66TB), Advanceddisk (3.42TB), Tape Library for Duplications. The 5250 we are configuring (Master / med...

Appliance Upgrade Readiness Analyzer (AURA) and System Load

Please disregard. I posted this in the wrong forum by mistake. I have reposted in the NetBackup Appliance forum.Thanks,JasonCan you run the AURA while the system is performing backups and replications? In checking my schedules, I don't seem to hav...

elevate mode is not working

Hi All,When I try to run /opt/Symantec/sdcssagent/IPS/sisipsoverride.sh command on appliance. It gives an error like that;unable to communicate with the SDCSS Util Daemon.I check with ps-ef. it seems working. do you have any information as to why thi...

Tiering to public cloud connectivity question

Hello,I´m thinking about offering an Access Appliance to solve storage unpredictable growth by publishisng volumes to servers and tiering to public cloud. The only thing we need to solve is:Information sent to public cloud must me transferred using a...

Resolved! Access Appliance Licensing question

We are considering buying an Access 3340 636 TB appliance for an environment which will be using 50 TB initially but in the long term it will grow to 500+ TB.My question is: Is it possible to acquire the Access Appliance and purchase only 300 GB lice...

VOX

Discussion Posts