Hi all, I have the following setup: Solaris 11.3 SPARCLDM 3.3VCS 7.13x SPARC T5-2 Servers2x I/O domains per system From Visualization Guide about Failover scenarios: Domain state: Control domainAlternate I/OVCS behaviorUpUpNo fail overUpDownNo ...
Hi Team, I am seeing MultinicB resource fault as shown below D Ossfs Proxy ossfs_p1 et-coreg-admin2 D PubLan MultiNICB pub_mnic et-coreg-admin2 D Sybase1 Proxy ...
Hi, If VCS agent is down, do we need to freeze the SG before start the agent?
Hi Guys, I'm trying to add a new node to a cluster. This is my environment: OS: Red Hat Linux 6.5SFHA version: SFHA 6.1.1eth1 - first private heartbeat linketh0 - low priority heartbeat link My exisitng cluster has the same environment with the ne...
With a shared diskgroup, it is managed by cvm, and whenever it gets imported on one node, it will be automatically imported on the other node as well. So when exactly will the setting 'CVMActivation=ew' work with VCS? I tried setting that, but as so...
I met a problem about vcs. Environment: HW T5220 Server *2 + ax4-5; Problem description: When executing “init 6” or “hastop –all” command in cluster system, resource cfsmount1&cfsmount2 could not been offline normally; Checked with the ...
I met a problem about vcs. Environment: HW T5220 Server *2 + ax4-5; SW EMM8 ICP1505 Problem description: When executing “init 6” or “hastop –all” command in cluster system, resource cfsmount1&cfsmount2 could not been offline normally...
Environment SFHA = 6.1.1 OS = RHEL 5.9 Virtual IP = 192.168.0.1 Query Can we use "IP Options" attribute of IP resource for src IP address selection without mentioning default gateway in "IP Options". Example IP ROUTE COMMAND below ip route r...
Looking for a method to modify or remove particular action points for the HA Fire Drill. As an example, the Mount Agent action 'mountentry.vfd' specifically checks for mount entries in /etc/filesystems. By chance, our environment and admins requir...
hi all. I'm using an application in a global cluster environment formed by 2 mini-cluster with one node each one, configured by a supplier. this application is using 2 NICs: one for the LAN of the management of the servers and one for the LAN of th...
Environment Cluster nodes = 2 SFHA version = 6.1.1 OS = RedHat 5.9 Query In case of a two node cluster, node2 (passive node) is already down and service group is online on node1 (active node), due to some reason node1 (active node) got rebooted....
We are trying to Implement Transparent Data Encyrption (TDE) on Microsoft SQL Server 2012 Enterprise Edition (64-bit) (SP2) (11.0.5343.0) under Veritas Cluster Server 5.1 with three nodes, but have had problems. The OS is Windows 2012 R2. Has anybo...
ENVIRONMENT OS = Redhat 5.9 (64bit) SFHA = 6.1 Total cluster nodes = 2 QUERY There are following 7 patches for SFHA 6.1 vm-rhel5_x86_64-Patch-6.1.1.400 cpi-Patch-6.1.0.600 cpi-Patch-6.1.1.500 gab-rhel5_x86_64-Patch-6.1.0.100 fs-...
Environment Primary Site = 2 nodes OS = Windows Server 2008 R2 SFHA version = 6.1 Query: An already configured two node windows VCS cluster (6.1 version) in Windows Server 2008 R2. The cluster has been working and the only configured user is th...
Hi All. In my company, we are working implementing HA to my Solaris server that use LDOMS, at this moment we have 1 server with 1 storage, the objective is to implement a second server and storage. I would like to have your recommendations about th...
Hello Team, I usually check /etc/llthosts to find which is masternode in CVM cluster i.e. 0- measn that is the master node. But vxdctl -c mode gives a different nodes as master. I am little confused here that we do not need to look /etc/llthosts t...
Hi, I have the following set up on my cluster: The main interface eth0 And 2 vlan tagged interfaces eth0.100 eth0.200 Each interface has been plumbed with an IP and I have a NIC resource set up to monitor them Seeing as the server is a HP ...
Hi , I am seeing below errror messages in dmpevent.log /var/adm/vx/dmpevents.log Mon Mar 28 11:23:27.786: SCSI error occured on Path sdv: opcode=0x5f reported reservation conflict (status=0xc, key=0x0, asc=0x0, ascq=0x0) Mon Mar 28 11:...
I want to switch the application to minos2，but I cannot select the system No system，why？ root@minos1(/)# hastatus -sum -- SYSTEM STATE -- System State Frozen A minos1 RUNNING ...
Veritas High Availability Agent Pack 1Q 2016 is now available on SORT: https://sort.veritas.com/agents. Application Agents Added support for JBoss 8.x and 9.x. The JBoss Application Server 8.0 and later releases are now known as WildFly.Added suppo...
| User | Count |
|---|---|
| 119 | |
| 35 | |
| 33 | |
| 29 | |
| 22 |
