06-04-2015 02:23 AM
Hello,
Quick question, should there be any issue if a customer wants to change the index disks from EMC to NetApp?
Is there anything that should be done differently?
As I see it it is the same as replacing index disk:
copy all the data in the background
take services down
copy last minute index changes
change the disks
make sure path and disk drive letter are the same
bring services up
sounds ok? or is the EMC to NetApp is trickier than what I think?
Solved! Go to Solution.
06-04-2015 04:29 AM
Hi Sarah,
I performed the action for EV9 following this doc: http://www.symantec.com/docs/TECH51450
The document for EV10/11 is here: http://www.symantec.com/docs/HOWTO82325
Greetings!
06-04-2015 03:34 AM
Hello Sarah,
I've done the same excercise a few years ago at another customer. Following the steps to 'replace index-disk' works fine.
06-04-2015 03:40 AM
Any specific TN on that Gertjan?
As all I can find it how to change location which I'm sure it's the same...
06-04-2015 04:29 AM
Hi Sarah,
I performed the action for EV9 following this doc: http://www.symantec.com/docs/TECH51450
The document for EV10/11 is here: http://www.symantec.com/docs/HOWTO82325
Greetings!