cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup Appliance

Discussion Posts

NBU Appliance Admin access via putty ssh is denied

I've been loggin in remotely to NBU appliance via putty ssh until I configured SRM (IPMI) and practically click Console Redirection button. After that I cannot log in anymore to appliance via putty (access denied), though login directly to appliance ...

Yet by Level 5
Partner Accredited
  • 3128 Views
  • 8 replies
  • 2 kudos

Netbackup Appliance FT Server Poor Performance

Any one knows what is the best performance average to backup AIX Lpar trough SAN Client, i been applied buffers and number buffers for ft, but the performance is about a 200 MB/sec. Netbackup Appliance and AIX lpar are connected by brocade switch wi...

Rockdrigo by Level 3
Partner
  • 1574 Views
  • 7 replies
  • 1 kudos

NBU Appliance IPMI KVM Disabled

I have a 5230 Appliance, I have managed to get the IPMI configured by using IPMITools. When I try to use the KVM portion (Click on the Remote Control tab) I get a pop-up saying "This feature has been disabled by an administrator" I followed the inst...

Gfontes by Level 3
Partner Accredited
  • 3371 Views
  • 11 replies
  • 1 kudos

Resolved! Migrating From Data Domain To NBU Appliances

Hi,   One of our customers is currently using NBU 7.5 for two infrastrucutres (Unix and Windows). Recently they decided to move to NBU Appliances (5230, 3 of them).  what is the easiest way to migrate the existing data from the DD appliance to the...

Georges_Achkar by Not applicable
Employee Accredited
  • 535 Views
  • 2 replies
  • 0 kudos

Resolved! Remote AIR restore from tape

Hi All, I have AIR setup and working between two appliances and have successfully restored a backup using the Vcenter plug-in from the remote master. We keep the images on the remote master for around 3 months. However, at the remote server e...

lt13624 by Level 4
  • 848 Views
  • 3 replies
  • 1 kudos

Resolved! Decommission of NBU 5000s

I need to decommission 2 NBU 5000s and can't find clear information on doing that. I pointed all policies to other storage and allowed everything on the appliances to expire. Is there a tech note or other documentation on removing them?

Are Appliances affected by recent BASHBug?

Will NBU appliances be at risk on bashbug?..... What could be preventive actions to be taken to protect it.   Although appliances have been hardened by SCSP and has restricted privileges, are there chances it might get affected?   http://www.syma...

V4 by Level 6
Partner Accredited
  • 502 Views
  • 4 replies
  • 1 kudos

Resolved! VMware backup over SAN: Appliance to ESX zoning

Guys, I have a Solaris based Master server and 5 x 5220 Appliances (media). I am interested to configure VMware backup over SAN. I need confirmation on whether zoning between Appliance (media server) to ESX is required? If yes, then Appliace is Ini...

Itegral by Level 6
  • 2357 Views
  • 6 replies
  • 0 kudos

Resolved! Appliance 5230 HBA ports using initiater or target mode!!!

Hi All , I have the current case and need to clarify how right is the configuration: I have an 5230 appliance as media server D model ,and initially  all HBA port coming with initiator mode to be used as tape out and vmwre host. I will configure so...

Rami_Nasser1 by Level 6
Partner Accredited Certified
  • 2149 Views
  • 3 replies
  • 0 kudos

Resolved! AIR does not work after NBU appliance upgrade

Hi, recently we helped a customer to upgrade two NBU 5230 appliance from 2.5.4 to 2.6.0.3. Before the upgrade, the AIR between the two appliance (one in prod site and one in DR site) is working fine. However, after upgrade, we can see AIR job run in ...

liuyang by Level 6
Partner Accredited
  • 648 Views
  • 5 replies
  • 0 kudos

Resolved! IPMI does not work

Hi, we are helping a customer to configure a NetApp 5230 appliance which is upgraded from 2.5.4 to 2.6.0.3. Previously we did not configure IPMI. After the upgrade, we decide to configure IPMI. However, I followed the guidelines in NetBackup doc but ...

liuyang by Level 6
Partner Accredited
  • 7720 Views
  • 6 replies
  • 7 kudos

Resolved! Connecting additional Storage to Netbackup Appliance 5220.

I have a NBU appliance 5220 with two storage shelves with 35 TB each. The version is 2.6.0.3 I am using 64 TB for MSDP and 11 TB as Advanced Disk.   With 2.6.0.3, the MSDP capacity has been increased to 144 TB. instead of buying additional stora...

Mux by Level 4
  • 233 Views
  • 1 replies
  • 0 kudos