Hello All, The dmp 5.1SP1PR2 installation is completing but it unable to start it. getting follwing error Veritas Dynamic Multi-Pathing Startup did not complete successfully vxdmp failed to start on ddci-oml1 vxio failed to start on ddci-oml1 v...
Hi, I have an question on scsi alua handler and VxDMP on Linux. we have a scsi_dh_alua handler on linux, which can handle the ALUA related check conditions sent from target controllers. so this will be handled by scsi layer itself and will not be ...
Dear Gents, I have recently installed DMP 5.1 SP1 RP2 on a rhel 6.3 os x86_64, after the installation when i took a reboot the system got hung during the boot time. i found the follwoing error message from teh console. "this release of vxted doesno...
Hi experts, I'm using SFRAC 6.0.3 on Oracle Linux 5.8 with Oracle storage (2 HBA cards, 4 paths) and would like to make the DMP subpaths persistent after rebooting. I knew that for single path I can write the following udev rule: KERNEL=="sd*", BUS==...
I recently recrated a LUN with a different size but the same LUN ID (Linux SLES11) and when trying to initialize it as a new disk to VxVM I keeps sticking to the old size, whatever I do (I tried to destroy and reinitialize in different formats and g...
