Hi All.
I have a question:
¿How i can install and configure a drive LTO5 on Netbackup 6.5.4?. When i install a drive LTO4 i attach each one of the media servers with this drive. I know that the density of this drive is HCART and I use the tpconfig ...
Hi guys.
I have this problem when i try to grow any volume:
root@cgestion2 # /etc/vx/bin/vxresize -t taskid_110 -g datadg oracle15 +500M
VxVM vxresize ERROR V-5-1-7231 Problem running mkfs command for volume oracle15, in diskgroup datadg
/de...
Hi all.
I have the next problem:
I changed a bad Tape Drive. Hes name is HPESL_1_Drive03. When i going to modify this on media server i use "tpautoconf -replace_drive "HPESL_1_Drive03 -path /dev/rmt/48cbn". This path i see using "tpautoconf -report...
Marianne.
I ran the command and i get the same error.
# /etc/vx/bin/vxresize -F ufs -t taskid_110 -g datadg oracle15 +500M
VxVM vxresize ERROR V-5-1-7231 Problem running mkfs command for volume oracle15, in diskgroup datadg
/dev/vx/rdsk/datadg...
Hi Marianne.
I show this information with the command:
root@cgestion2 # vxprint -htr -g datadg oracle15
ST NAME STATE DM_CNT SPARE_CNT APPVOL_CNT
DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE
RV NAME ...
Hi Zahid.
I did this using GUI but a have the same results. I trust more in CLI because I define all paths and one only, but when i using GUI this detect more paths and duplicate this. I always use GUI in windows machine but in Unix i use CLI.
Chakkrit.
In somes machines i did these. After i going to add newly this drives but i receved the error sending in this forum.
I probe the next:
1) tpautoconf -replace_drive HPESL_1_Drive03 -path /dev/rmt/xxxx but the drive follow Missing_path and...