Forum Discussion

Remco_Etten's avatar
Remco_Etten
Level 4
11 years ago

Hostmode setting on SunSTK 6180 after upgrade no longer supported

Goodafternoon, We are in the progress of doing an upgrade to our STKSUN 6180 disk array to firmware version 07.84.44.10. In the release notes of this firmware we run into the following challenge :...
business continuity
Configuring
Dynamic Multi-Pathing and Dynamic Multi-Pathing for VMware
Installing
Solaris
Troubleshooting
  • Gaurav_S's avatar
    Gaurav_S
    11 years ago

    Hi Remco,

    You need to look in hardware technote for hostmode setting, here is the doc link

    http://www.symantec.com/docs/TECH47728

    Page 43 talks about STK6180 array, minimum firmware is 07.5x.xx.xx so you are good with this. Hostmode setting is mentioned as "Solaris (with Traffic Manager)"

     

    G

Gaurav_S's avatar
Gaurav_S
Moderator
11 years ago

Hi Remco,

You need to look in hardware technote for hostmode setting, here is the doc link

http://www.symantec.com/docs/TECH47728

Page 43 talks about STK6180 array, minimum firmware is 07.5x.xx.xx so you are good with this. Hostmode setting is mentioned as "Solaris (with Traffic Manager)"

 

G