Forum Discussion

Gaurav_singh's avatar
Gaurav_singh
Level 4
11 years ago

Gab membership showing two instances

Hi, I configured VCS  6.0 in Sol 10, when i put gabconfig -a command it shows the below status,I am not able to get it why it is showing 2 membership, it should be one, please state its reason and...
business continuity
Case Study
Configuring
Solaris
Storage Foundation
  • mikebounds's avatar
    mikebounds
    11 years ago

    If you mean why is it showing 2 lines this is because "port a" is for gab and "port h" is for VCS (had daemon) - this is completely normal.  If you stop VCS using hastop -local this will offline any service groups you have configured and you will then no longer see "port h" membership - just "port a".

    Note also this is only show a 1-node cluster - if you have 2 nodes then you will see "membership 01" rather than "membership 0" and if you had 4 nodes then you would see "membership 0123" - each digit represents the llt node id is /etc/llthosts.

    Mike

mikebounds's avatar
mikebounds
Level 6
11 years ago

If you mean why is it showing 2 lines this is because "port a" is for gab and "port h" is for VCS (had daemon) - this is completely normal.  If you stop VCS using hastop -local this will offline any service groups you have configured and you will then no longer see "port h" membership - just "port a".

Note also this is only show a 1-node cluster - if you have 2 nodes then you will see "membership 01" rather than "membership 0" and if you had 4 nodes then you would see "membership 0123" - each digit represents the llt node id is /etc/llthosts.

Mike