vmoprcmd output has changed

 Recently, I noticed that vmoprcmd output has changed and now it looks like:

 

Drive000                 No      No                     No        hcart3
    nbu-backup-srv-5
    TLD     {3,0,1,0}
    m8000
    TLD     /dev/rmt/0cbn
    nbu-backup-srv-0
    TLD     c32t0l0 (nbu-cifs-netapp-0)
    nbu-backup-srv-1
    TLD     {2,0,0,0}
    m9000
    TLD     /dev/rmt/1cbn
    nbu-backup-srv-6
    SCAN-TLD {1,0,6,0}
    t5
    TLD     /dev/rmt/4cbn
    t7
    TLD     /dev/rmt/4cbn

previous version was much better to look at:

 

Drive000                 No      No                     No        hcart3
    nbu-backup-srv-5           {3,0,1,0}                            TLD
    m8000                      /dev/rmt/0cbn                        TLD
    nbu-backup-srv-0               c32t0l0 (nbu-cifs-netapp-0)          TLD
    nbu-backup-srv-1               {2,0,0,0}                            TLD
    m9000                      /dev/rmt/1cbn                        TLD
    nbu-backup-srv-6           {1,0,6,0}                            SCAN-TLD
    t5                         /dev/rmt/4cbn                        TLD
    t7                         /dev/rmt/4cbn                        TLD

but unfortunately it's by design and you can save your time and don't open a new support case.