Errors while creating a SRT(RHEL)
Hi I am now trying to run a BMR. So, when I am creating the SRT, I get the following error and cannot create it. The information on the server I am using is below. Master server: Windows Server 3029 Std Boot server: RHEL 8.6 Netbackup ver: 9.1.0.1 Errors are as follows Enter the path of the first CD/DVD of the desired Red Hat | Oracle | CentOS Enterprise Linux Server operating system level . The supported versions are (5 , 6 , 7 , 8) Please load the media now. The supported versions are (5 , 6 , 7 , 8) Please load the media now. for help) [/dev/cdrom] : /iso Enter the desired architecture (i686 or x86_64) [x86_64] : Enter the directory in which to place the new SRT [/export/srt] : /export/srt Creating repository to stow files from distribution media. Extracting files ........................................................................................................................... Extracting files . ok. The media repository is now complete. Working ............................................. V-125-50 cannot extract file "/lib64/libaudit*" from RPM "/usr/openv/netbackup/baremetal/server/data/media/x86_64-RHEL-8299465/libaudit64.rpm" V-125-39 caught exception: runtime error in srtPlat.cpp:ExtractRpmFiles() [Error] V-125-105 Cannot install operating system onto this SRT. Please see diagnostic log for additional information. Removing SRT "SRT_RHEL" from server -- please stand by ... From the official Veritas website, RHEL 8.6 is no longer supported. Is this error because RHEL8.6 is not supported? Or is there some other cause? Thanks.Unable to restore (Bare Metal Restore)
Hi. Please tell me about Bare Metal Restore in Netbackup. I created a boot media for restore with Bare Metal Restore. I tried to restore using it, but I got an error. Error message "The restore has stopped due to the following error:Unable to configure network". The configuration is as follows Master Server: Windows Server 2019 Standard Client: Windows Server 2019 Standard Netbackup(master server/client): 9.1.0.1 Backup target: C:,System State:\,Shadow Copy Components:\ Network teaming is configured with LACP for both the client and master server. We have two ports belonging to one teaming, each with a separate segment. When restoring, we are using a single port with a backup segment. Please let me know how to resolve this issue. Also, if the client OS is Windows, is the above correct for the backup target? Thanks.
