On server 2012 r2 services stopped problem
Hello to everyone. My operating system is server 2012 r2 and worked with a domain I am Installed Symantec Backup exec 15 After system restarting. my system software open with 4 services stopped error .. - Backup Exec MAnagement Service - Backup Exec Job Engine - Backup Exec Agent Browser - Backup Exec Server I am update all recommended windows and SQL updates But I can't solved the problem .. Thank's for all explanations
Starting Out Ghost Solution Suite
I could use a little help/advice on getting started with Ghost Solution Suite 2.5. First off, I have the product installed on my PC and am finishing up one PC to create the image from. All the PC's that'll be receiving the image are identical. Can Ghost Casting be done over Wireless or is Ethernet the only way? How do I ensure the drivers are in my Ghost Boot disc that'll creat for each system? (Windows PE, Deploy Anywhere) Where do I go from here? I've read the forums, but am a little confused, I'm new at using Ghost Solution Suite and we have 175 pc's to image total. I'll be doing this onsite where each site will have about 20 pc's to image. I feel I have the basics down here, create image, create boot disc and include any drivers needed. Open Ghost Cast Server, create session, input location where image is at. Then in the boot disc, select Ghost Cast, enter session.... I haven't gotten any further yet, I'm beginning to set everything up and wanted anypointers/advice someone would provide. That way I can go in strong and have a better understanding. If I put this in the wrong community, I apologize in advance, I'm used to being able to Google whatever troubles I run into.
Unable Access Second Partition After Formatting Primary Partition
I recently had fully encrypted hard disk (Toshiba mq01abd075), operating system (Windows 7 Professional), two partition. C (146 GB) and D (548 GB) and 4 GB Unallocated space. I ran the system restore for partition C, after which I was unable to access the operating system. I reinstalled the operating system partition C. I installed PGP WDE, when I entered in the program, partition D does not appear to be decrypted. Partition D appears in My Computer (0 bytes), in computer management at disk management appear 548 GB RAW. If I double click on it ask me for Format, but i've never click Yes, so the second partition was never touch after the problem.After this I reinstalled twice the OS. Now I have windows 8.1 but stil,but still I have not touch the second partition. I've tried to decrypt the drive with a few tutorials such as(WinPE and put the hard disk as second partition): http://www.symantec.com/docs/TECH170574 http://www.symantec.com/business/support/index?page=content&id=TECH149478 Give me various errors suchs as: "Could not locate valid BGFS record. Recovey failed! Operation recover disk failed: Error code -11984 item not found" or "Disk 1 is not instrumented by bootguard" and others. I know was my fault. Please give me a solution. P.S: Sorry for my english, I'm not native and please move this topic if it was not posted properly
Problema con PGP
Tenemos una carpeta compartida encriptada con este software, la misma esta ubicada en una máquina virtual con Windows 8, después todos los usuarios acceden desde el recurso compartido conectado en cada una de sus pcs, obviamente colocando la contraseña correspondiente vinculada con el certificado instalado por cada usuario. Para poder accederla, el administrador debe ingresar a la máquina virtual y colocar su contraseña sobre la carpeta, de esta manera, habilita el acceso a los demás usuarios desde sus respectivos puestos de trabajo. El problema es que cuando el administrador no se encuentre, los demás usuarios no van a poder ingresar a la carpeta. Hay alguna configuración en el software para que siempre quede habilitado el acceso a la carpeta a los demás usuarios sin tener que intervenir el administrador? Tenemos la version 10.3.x Además, a la hora de querer abrir un archivo de word, excel, power point, pdf o imagenes, aparece el siguiente error: "El formato y la extensión de archivo de xxxxx no coinciden. Puede que el archivo esté dañado o no sea seguro. No lo abra a menos que no confié en su origen. ¿Desea abrirlo de todos modos?" Si ponemos que si, no muestra la información del documento. El Administrador, si puede ver los archivos sin problemas, y no le figura el error. Espero sus respuestas. Desde ya muchas gracias Saludos
Symantec Protection 6.0 for SharePoint Servers
I have Symantec Protection 6.0 for SharePoint Servers installed on Windows Server 2008/SharePoint Server 2010. FarmOverview page displays information about SharePoint Server 2010 version. SP server version is incorrect. Where Symantec gets the SP version information from?Symantec Messaging Gateway adding additional Domain to Exchange 2010.
Hi, My question is that i have to add an addition domain to my Exchange 2010. I am fairly familiar with the process on how to add that. i am using symanted messaging gateway which routes SMTP traffic to my exchange 2010 server and one domain is currently running fine that can send and receive email. Now if I add another domain. Will i need to make changes within the Symantec messaging gateway. What are the things that i need to keep in mind before going ahead with the project. Thanks. Ryan.messaging gateway with two interfaces
HELP ME I need implement a scanner that processes outgoing mail, but mail received by an interface with an IP address and send it by another interface with another different IP (like a bridge). for example eth0 (outbound mail): 10.2.2.2/24 eth1 (outbound mail to the Internet): 200.3.3.4 this is possible?? currently already set and I can ping from the appliance to the network 10 without problem and also from the appliance to the network 192 but I can not send mail yet.
Problem updating a theme/resource in workflow designer 7.1
Hi, I created a new theme and tried adding it under the resource section, but when I published the project, the theme doesn't apply. It seems to work fine when I validate, but somehow a path issue comes up and I get an error message later on saying that the resource cannot be found. I noticed that the other resources are saved relatively, but somehow I can't seem to find out how to do this for the theme. Here are the steps I did: - Select main project on left pane - Select Resources tab on right pane - Click "add" and select theme - Selected a subfolder under the current project name Thank you!