Unable to configure multile application for monitoring.
Hello all. I used Application HA 6.1 on windows server 2012 R2. I read this document( http://www.symantec.com/docs/TECH159846 ), then I performed the commands to add an application to an existing configuration. However, commandline put error messesage. How can I resolve this error? --------------- >XprtlC.exe -l https://localhost:5634/vcs/admin/createAppMonHBSG.pl -d params="<Cmd><ID>CreateVMWHBSG</ID><ServiceGroups><Name>SQLServer2012_SG</Name></ServiceGroups></Cmd>" <Cmd><ID>createAppMonHBSG</ID><ReturnCode>11</ReturnCode><Message>[SQLServer2012_SG] Group is not available in configuration. Failed to configure application heartbeat ervice group(s).</Message></Cmd> --------------- Thank you.Solved3.4KViews0likes1Commentcannot configure vxfen after reboot
Hello, We move physically a server, and after reboot, we cannot configure vxfen. # vxfenconfig -c VXFEN vxfenconfig ERROR V-11-2-1002 Open failed for device: /dev/vxfen with error 2 my vxfen.log : Wed Aug 19 13:17:09 CEST 2015 Invoked vxfen. Starting Wed Aug 19 13:17:23 CEST 2015 return value from above operation is 1 Wed Aug 19 13:17:23 CEST 2015 output was VXFEN vxfenconfig ERROR V-11-2-1041 Snapshot for this node is different from that of the running cluster. Log Buffer: 0xffffffffa0c928a0 VXFEN vxfenconfig NOTICE Driver will use customized fencing - mechanism cps Wed Aug 19 13:17:23 CEST 2015 exiting with 1 Engine version 6.0.10.0 RHEL 6.3 any idea to help me running the vxfen (and the had after ... ) ?6KViews0likes7CommentsVCS WARNING V-16-10031-8503 NotifierMngr:notifier:monitor:Expected correct SNMP and | or SMTP options
I've got this Warning message in myengine_A.log andNotifierMngr_A.log . My ClusterService is OFFLINE since I've reboot the server. And not possible to PROBE the ressource on any off my two server. any suggestion to remove the warning and/or restart the service will be appreciate. hastatus -sum -- SYSTEM STATE -- System State Frozen A tol031 RUNNING 0 A tol032 RUNNING 0 -- GROUP STATE -- Group System Probed AutoDisabled State B ClusterService tol031 N N OFFLINE B ClusterService tol032 N N OFFLINE B lan tol031 Y N ONLINE B lan tol032 Y N ONLINE B touapf tol031 Y N PARTIAL B touapf tol032 Y N OFFLINE B vxfen tol031 Y N ONLINE B vxfen tol032 Y N ONLINE -- RESOURCES NOT PROBED -- Group Type Resource System E ClusterService NotifierMngr notifier tol031 E ClusterService NotifierMngr notifier tol032 E touapf Application touapfxcamApp tol031 E touapf Application touapfxcamApp tol032 E vxfen CoordPoint coordpoint tol031 E vxfen CoordPoint coordpoint tol032 ps the PARTIAL on may touapf Group is known, nothing to do with my issue.1.5KViews0likes2CommentsApplication HA clustering has dropped a disk... :-/
Hi, After I completed the Application HA clustering of SQL2008 across two Windows 2008 R2 nodes, I found that the SQL installation'svirtual Backup disk (M: for reference) remained on the first node after I'd initiated a switch to the second node via the High Availability tab in the vSphere Client. The other disks re-attached to the second node ok. On closer inspection in Cluster Explorer on one of the nodes I discovered that the Mount Point for that disk was completely missing! I attempted to manually create the Mount Point and brought the resource online in the cluster on the first node, but attempting the switch operation again failed as the virtual disk failed to re-attach to the second node. How to fix without blatting the clustering / SQL installations? Thanks!Solved2.9KViews0likes10CommentsMissing VCS "VVRTypes.cf"Agents
Need help/ advice on how to recover missing VVRTypes.cf System Info OS RHEL 6.1 VCS Version 5.1 rp3 Objective To enable VVR in VCS-GCO environment During the process of creating RVG for VVR Service Group; I found that Done the following Checks (i) VVRTypes.cf is MISSING from the /etc/VRTSvcs/conf/config directory (ii) /etc/VRTSvcs/conf/sample_vvr/addVVRTypes.sh is NOT there (iii) re-install VCS5.1-rp3 patch DOESNT work . Message prompted "SFHA ver 5.1.133.000 is already installed. No rpm will be installed". Anyone can provide advice / help. SOS. Thanks in advance.Solved1.6KViews0likes2CommentsService group concurrency violation
I have two groups for the VCS cluster, App_Cluster & App_Notifier setup in an active/passive setup. The App_Notifier runs the vcs notifer server and send out e-mail on Error level events. The App_Cluster contains all the service to be monitored. Everything is running fine, but recently with all our appliances in development we have seen an issue when we reboot the standby box we get a VCS SevereError. I am trying to track down what suddenly is causing this e-mail to be triggered. --- Email sent --- Sent: Sunday, October 14, 2012 11:41 PM Subject: VCS SevereError for Service Group App_Cluster, Service group concurrency violation Event Time: Sun 14 Oct 2012 11:41:06 PM PDT Entity Name: App_Cluster Entity Type: Service Group Entity Subtype: Failover Entity State: Service group concurrency violation Traps Origin: Veritas_Cluster_Server System Name: app-49-59 Entities Container Name: App Entities Container Type: VCS ThanksSolved1.6KViews0likes3Comments