Netbackup Appliances 5230 with PureDisk: How many streams?
Hi all, We recently migrated to Netbackup Appliances running Netbackup 7.6.0.1 (Appliance version 2.6.0.1 ) We are running 2 appliances per site, each site is its own NBU domain (We use AIR to replicate). Each appliance is configured with a 70TB PureDisk volume. We are quite new to PureDisk that is running on these systems, but at this moment they are limited to 80 streams maximum in the diskpool object (Which seems pretty low to me) At the moment we are running out of resources due to this maximum that has been set. What is the maximum streamcount a 5230 Appliance PureDisk can safely handle? Note that we are using AIR to replicate all our images, but replication is being done during the day, not during backup times... Any advice is greatly appreciated! Thanks!1KViews1like2Comments
CLI Command For Dedup Rates
NBU Experts, Do any of you know if there is a CLI command that can tell the dedup rate for all the images created, and stored in a PureDisk pool? For examaple, if I run bpimagelist on the master server I get some good info, but not the dedup rate for each image. Thanks, AVazquez2.6KViews0likes7Comments
MSDP question re full at 96% vs. high water mark at 98%
When does full disk processing take place? At 96% or 98% ? And doesn't this all imply that a high water mark is probably best set to something like 90% (max)or probably (85%) so that clenup can occur before it gets full. If so, then why is teh default 98% Page 68 of the NetBackup v7.5 Deduplication Guide: http://www.symantec.com/business/support/index?page=content&id=DOC5187 ...says this: About deduplication storage capacity The maximum deduplication storage capacity is 64 TBs. NetBackup reserves 4 percent of the storage space for the deduplication database and transaction logs. Therefore, a storage full condition is triggered at a 96 percent threshold. For performance optimization, Symantec recommends that you use a separate disk, volume, partition, or spindle for the deduplication database. If you use separate storage for the deduplication database, NetBackup still uses the 96 percent threshold to protect the data storage from any possible overload. If your storage requirements exceed the capacity of a media server deduplication node, do one of the following: - Use more than one media server deduplication node. - Use a PureDisk storage pool as the storage destination. A PureDisk storage pool provides larger storage capacity; PureDisk also provides global deduplication. See “About the deduplication storage destination” on page 22. Only one deduplication storage path can exist on a media server. You cannot add another storage path to increase capacity beyond 64 TBs. ...but says this on page 82: High water mark The High water mark setting is a threshold that invokes the following actions: - The High water mark indicates that the PureDiskVolume is full. When the PureDiskVolume reaches the High water mark, NetBackup fails any backup jobs that are assigned to the storage unit. NetBackup also does not assign new jobs to a storage unit in which the disk pool is full. NetBackup also fails backup jobs if the PureDiskVolume does not contain enough storage for its estimated space requirement. - NetBackup begins image cleanup when the PureDiskVolume reaches the High water mark; image cleanup expires the images that are no longer valid. NetBackup again assigns jobs to the storage unit when image cleanup reduces the PureDiskVolume capacity to less than the High water mark. The default is 98%.2.1KViews0likes1CommentMSDP encryption (ServerOptions=agent_crypt) (or should it be =encrypt)
Hi Forum, Page 30 of the NetBackup Deduplication Guide v7.5 says that... by default MSDP encryption is disabled by default, but they it is recommended by Symantec. Page 70 says that to enable encryption that we need to add "agent_crypt" to "ServerOptions=" in the ContentRouter.cfg file. But looking at the comments in the file: ; [no]agent_crypt : always disable/enable client-side encryption; ; [no]encrypt : always disable/enable encryption; ...indicates that using "agent_crypt" instructs the client-side deduplication agent to encrypt data. At our site we are not implementing client side deduplication so it woudl seem to me that setting :agent_crypt" won't have any effect. My questions are: 1) Is "agent_crypt" really the option to use if what we are trying to achieve is encryption of the post-dedupe blocks on teh MSDP data storage local to teh MSDP media server? 2) What does the "ServerOptions=encrypt" option do, and how is it different to "agent_crypt" ? 3) If we can determine which option really does enable post-dedupe encryption - then does anyone know what the CPU overhead is ? 4) Are there any particular models of CPU (SPARC or Intel or AMD) that implement the encryption/decryption in their hardware instruction sets - i.e. are there any CPUs that are much better suited for use with MSDP encryption ? Thanks, Dave.Solved1.8KViews1like4Comments
