Sharepoint backup failure
Hi, The backup is failing with the following error: Job ended: Friday, September 19, 2014 at 6:37:58 AM Completed status: Failed Final error: 0xe000fe49 - An invalid parameter was specified. Final error category: Job Errors For additional information regarding this error refer to link V-79-57344-65097 V-79-57344-33899 - The resource could not be backed up because an error occurred while connecting to the Agent for Windows. The correct version of the Agent for Windows must be running on the target computer. How could this issue be solved? Thank you,674Views2likes2CommentsBackUP Exec
Dear Support, Please find the below issuse. We have life time licensefor Symantec Backup Exec 2010 R2.Right now the license key is its not working. The license key its showing error on our system.also serial no its not working. Kindly send the session to view the error from Backup Exec 2010 R2. Please do the needful action ASAP. Warm Regards, Shaik AbdullahSolved780Views1like1CommentSharepoint backup failing
Hi, The backup job is failing with the following error: Job ended: Monday, September 22, 2014 at 11:33:03 PM Completed status: Failed Final error: 0xe000fe49 - An invalid parameter was specified. Final error category: Job Errors For additional information regarding this error refer to link V-79-57344-65097 Unable to attach to . V-79-57344-33899 - The resource could not be backed up because an error occurred while connecting to the Agent for Windows. The correct version of the Agent for Windows must be running on the target computer. Can you please advise with the suitable solution and reason for this error? RegardsSolved1.2KViews1like7CommentsBE 2012 for VMware with RALUS for VM
Hi, Following were the infra details:- 1. VMware ESXi (2 no.) 2. VCenter. 3. VMotion is enabled. 4. four no. of VM for SAP and database is DB2 which is running on RHEL6.5 5. one VM for Zimbra. We have made the solution using BE 2012 for taking backup of all the VMs along with the GRT. Now, please , help with the following queries:- a. For VM backup 2 no. of VMware host licesne will work? b. A windows agent license for VCenter. c. For GRT which agent is required for DB2 database's file restoration? d. For the VM where Zimbra is situated, which agent is required for GRT restoration. Any other requirement for technical point of view. Thanks.1.4KViews1like15CommentsHow Can I Do This Better
There must be a better way than what I'm doing. In my opinion what I'm doing is overly complicated, the backups take far too long, and I'm running out of resources. Input on what I could do different to reduce the chaos is much appreciated. I have Backup Exec 2014 console on Windows 2008 server with a Tandberg storageloader for DDS1 tapes which hold 720GB each. It backs up 9 Windows 2008 servers. I use the method backup to disk then to tape once a week for keeping something offsite. Of those servers, 2 are backed up in full 5 nights a week, 2 are backed up full once a week and incrementals 4 nights a week, and 5 are backed up in full once a week. Generally the backup to tape is performed once a week on Sundays but there’s not enough time so I separated the verifications to run on Mondays then take tapes home Monday nights. To get all 9 servers on tape now takes four tapes. For back to disks I have two Synology NAS for most data (highest priority of course) and four lower end external drives for the rest. No jobs have dependencies meaning I have to carefully calculate the time it will take to run the backups and schedule accordingly. I must check my jobs often and adjust to accommodate increases in data. I was hoping the move to version 2014 would help with the backup speeds but it didn’t. Instead the backups to disk are a little slower which adds to the frustration. Attached is a screenshot of my calendar which shows the crazy complexity of my backup schedule. It’s out of control. When I recently upgraded from version 2012 to 2014 all those jobs had to be recreated. I’ve proposed backup to cloud at least once a week to replace the tapes but it may not happen until next year’s budget. I wish I could do the backup to tape and verifications in one job that covered all servers. I wish I could create dependencies between server jobs to recoup the time lost between jobs. In other words, when server 1’s full backup ends, server 2’s full backup starts. I don’t like doing incrementals because it will take longer for a full restore. Meaning, I would need to start with restore of the last full backup then restore each incremental backup one a a time until current. I have two servers with incrementals because I don’t have enough time on the schedule for doing more full backups for those servers. I don’t believe changing from incremental to deduplication will be an improvement. It might save space and time on the backup side of things but not on the full restore end which matters. I don’t think I can improve upon the fact I need to get at least one full backup to tape of each server weekly and then to put that weekly full backup to tape. Maybe it’s time I added a second Backup Exec console, Tandberg storageloaders, and dozens of more tapes so I could run two jobs simultaneously?1.3KViews1like7CommentsBackup Exec 2014 (or 2012) AWS Storage Gateway problems
I need assistance from someone who has successfully implemented the AWS Storage Gateway-VTL in either Backup Exec 2012 or in Backup Exec 2014. On the AWS site, it shows that BE 2012 is a supported application for their Storage Gateway-VTL. On the Key feature list for BE 2014 is shows that AWS Storage Gateway is supported. I have not been able to get the VTL to work properly in either. The problem I am having is that the robotic library (an STK L700) shows up, all 10 of the tape drives show up (ULT3580-TD5), but the drives are not listed under the library. There are drives under the library, but they are all in red and have a "missing device" error. I have tried for the last 3 days to work with Symantec support to resolve this. They claim that the library is support and the drives are supported, but the drives are not support inside of the library. They provided links to the HCL for both BE 2012 and BE 2014 to prove their point. So, I asked them why their key new feature matrix for 2014 show support for AWS Storage Gateway and the setup documentation in AWS shows a screenshot of the drives under the library in BE 2012. They didn't have an answer for this. They are now telling me that instead of working with me to resolve my issue, they are instead working with the marketing group to remove support for AWS from the feature list. WTF?!? The support group is either unwilling or unable to connect me with the product team so that I can get some clarification on what components of the Storage Gateway is supported (besides the VTL, there is also a disk based gateway). So, if anyone out there has successfully connected their BE installation to the AWS Storage Gateway I would greatly appreciate it if you shared the "secret sauce". Thanks, ALM2.9KViews1like21CommentsFormat LTO Tape Backup Exec 2012
Hello, I hope you can help me .. I have installed on Server 2008R2 Backup Exec 2012 with a DELL PowerVault 124T LTO has a magazine 8 tapes 800GB c / u. Because backup plans I have configured, can not find some method to format tapes, ie, I have several full tapes and want to use them again, I want to format the tape to use them again. The most you have to do is delete the data but as Backup Exec says, the data is not deleted, but only disappear and others and the space remains the same, ie, full, just back a the option of inventory and catalog the data again appear and stay in them. The model is Ultrium LTO4 tapes DELL Server model DELL PowerVault 124T tape I hope someone can help me .. Thank you!979Views1like2CommentsSymantec Central Admin....
Hi, After long time back I am back....... Ok comming straight to the topic... I have the following details:- 1. BE 2012 SP1 on MS Windows 2008 R2. 2. Tape Library (4 nos. of FC drive). 3. SAN switch (2 nos.). 4. SAN Storage. 5. LUN are mounted in different servers(7-8 nos. of servers) from the storage. These LUN are taken backup. Now, we are currently taking LAN based backup from all these server to tape library. Speed..defently a issue. As data size are around 1 TB apprx. on each server and thses data need to be backed up every day (Full backup). Which defently a big deal for us. Now, we are upgrading to Enterprise License. And planning to install the media server on each server so that we can put the data directly to the tapes. I have check the below link for my further referance:- http://www.symantec.com/docs/HOWTO23028 (How CASO works) http://www.symantec.com/docs/HOWTO23023 (Installation of CASO) http://www.symantec.com/docs/TECH43297 (Diagram and working of CASO) http://www.symantec.com/docs/HOWTO21788 (Best Practices) Is there any best practrices experiance and thing need to be checked or any other pre-requisists. Please, provide me the ways ... And please let me know the linkf from where I can download the software. Any case studies... Thanks1.3KViews1like10CommentsBackup exec 2012 Archiving and deduplication
Hi , please i want to know Best Practices to put together Deduplication and Archiving Option in one media server ? can i do a backup job to a deduplication folder then add an archive stage without having a problem? restored data from archive are deduped data ? ThanksSolved602Views1like4Comments