VMware VM "needs consolidation" after backup failure
Has anyone else run into this issue? VM backup fails with a "Status 13" or "Status 156" or "Status 40" - I have several hundred VMs and only a few end up in this state during a backup window. No snapshots show up in Snapshot Manager on the VMs that have this error. When consolidation is attempted VMware throws a "Unable to access file <unspecified filename> since it is locked" error. The "fix" for us has been to run "services.sh restart" on the ESXi server - this unlocks the file - then manually consolidating the VM. Sounds a lot like this issue: https://www-secure.symantec.com/connect/forums/problem-backup-virtual-machine-when-vm-convert-status-consolidate Master: 7.6.0.2 on Solaris 10 Media: 2.6.0.2 on 5220 Appliances17KViews3likes11Comments
Virtual Machines going out of network during snapshot backup
Has anyone experienced the Virtual machines going out of network during the backup using "VMware" policy. Apparently , the Windows VMs losing connectivity for a little while and coming back online and the Linux VMs becoming unresponsive.Solved12KViews1like7Comments
Very Slow VM Backups
Hi, We are currently using Network based VM backups rather than SAN based, the Backup Host is a Windows 2008 server running NBU7.5.0.5 and has full access to the ESX servers, I have several policies set up including VIP's for covering the VM's. The back bone is a 1Gb LAN, the Backup Host is SAN attached to an HP VLS12000 which is emulating LTO4 drives, this is on 4Gb F/C When backing up the VM's I am only seeing on average 1.5M/s throughput, we have standard clients that are using the conventional NBU method whuch reach over 40M/s through the same medium. Just wondered if there were any tuning or other paramaters that we need to look at with the VM backups to speed them up. KevSolved9.7KViews1like22Comments
Minimum permission to backup a MS-SQL database using NetBackup
Any bad-developed application is avoiding thepermission issues using the most intrusive role. In a security strategy, the main goal is to assign the minimum necessary roles for each login. The RDBMS MS-SQL Server allows to maintaing several specific databases in one specific instance, with a correct permission granularity. To maintain this granularity, SQL Server 2005 splited the system admin role in several less intrusive server roles and db roles. Now, a backup operator is able to backup a database without accessing to the data of this database. The db_backupoperator database role is only necessary. The list of the databases is available through the public permission in the master..sysdatabases system table. In the document "Veritas NetBackup™forMicrosoft SQL ServerAdministrator’s Guide", the permission issue is evasive : "When the NetBackup scheduler is used, backup operations are launched from adaemon process called the NetBackup Client Service. You must ensure that theClient Service has SQL Server privileges to perform backup and restoreoperations. If you are using integrated security, then you must ensure that theNetBackup Client Service specifies a Windows account that has been grantedSQL Server administrative privileges." In the technotehttp://www.symantec.com/docs/TECH43512, you're specifying "Any logon that requires permissions to perform backup or restore operations should be provided membership in the following SQL Server roles: Server Role : sysadmin DB role : db_backupoperator, dbo_owner Permissions required for performing restore - Server role : sysadmin, dbcreator DB role : db_owner" My question : do you really understand something about the MS-SQL permission ? Why do you need the sysadmin permission ? If it's really necessary, why do you need the dbcreator (included in the sysadmin) ? Why the db_backupoperator and the db_owner ? In fact, only the db role db_backupoperator is necessary, in a MS-SQL point of view. We experimented some hard failure on production applying the sysadmin permission in the Netbackup Logins (client VaultAdmin) : a modification in the sysusers tables is done, replacing the db_owner database role with and changing the db owner to an non-existent dbo user (technically, the dbo'sysusers.sid was replace on each database from 0x01 to the vaultadmin'sid.) Did you plan to implement a correct security in a future version of your product ? Did you already provide a patch for this issue ? Thanks in advance for your answer. Fadace8.9KViews1like6CommentsVmware backup failed - error code 156
Setup: Master server netbackup version : 7.5 Vcenter server : windows 2008 r2 Esxi version : 5.1 Proxy server : windows 2008 r2 ( NBU client 7.5) There are 8 esxi servers and more than 30 VMs. Backup is taken for around 20 VMs, in which backup is failing for 5 vms with the same error. Troubleshooting steps followed till now: 1) The backup is failing with the below error. Netbackup job details Critical bpbrm (pid=2361) from client XXXXX: FTL - VMware snapshot failed: SYM_VMC_TASK_REACHED_ERROR_STATE 10/07/2013 16:21:38 - Critical bpbrm (pid=2361) from client XXXXX: FTL - VMware error received: An error occurred while quiescing the virtual machine. See the virtual machine's event log for details. 10/07/2013 16:21:38 - Critical bpbrm (pid=2361) from clientXXXXX:FTL - snapshot creation failed, status 156 10/07/2013 16:21:38 - Warning bpbrm (pid=2361) from clientXXXXX:WRN - ALL_LOCAL_DRIVES is not frozen VMWARE snap shot creation failed: Vmware error: The guest OS has reported an error during quiescing. The error code was: 3 The error message was: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. 2) Tried to take snapshot(with quiesce option enabled) in the VM from Vsphere client GUI and it completed successfully. 3) Verified the disk space availability more than 70 GB available. 4) Rebooted one of the VM and retired the backup. But still backup failed with same error. http://www.symantec.com/connect/forums/status-code-156 5) In the above article they have faced the same issue, after reinstalling the vmware tools it worked. 6) Reinstalled the VM tools but still same issue.Solved8.3KViews1like4Comments
vCenter backup fail
I keep running into the same issue where BE2014 will error out when it reaches vCenter in the VM backup scheme. I get the following messages whether BE is backing up the whole datacenter or backing up the indivual VM. vcenter test-Backup -- The job failed with the following error: An attempt to take a snapshot of a virtual machine failed because it was unable to quiesce an application. A quiesced snapshot could not be created for the virtual machine (DC)ha-datacenter(DC)\vm\Vcenter. Is vCenter supported in BE2014?Solved7.6KViews1like10CommentsHow to find VMware API version used?
We are discussing a matter with VMware support, and they want to verify which VMware VDDK is being used by NetBackup (backup hosts Unix and Windows performing VMware backups), is there a matrix documenting this or a way to verify the version used on the backup hosts? I would like a universal solution, so I know this for future reference as well...Solved7.5KViews0likes3Comments
Netbackup VMWARE backups failing with snapshot error 156
Hi All, Please can someone urgently assist, I currently setup a brand new Netbackup Environment, -Netbackup 7.5.0.4. -Clustered Solaris Master Server -Windows 2008 R2 Backup Host -Vcenter 5.1 VM Datastores have been presented to the Backup Host, Diskpart automount disable and automount scrub have been run on the Backup Host, Credentials for the Vcenter Server have been entered and vailidated successfully, The Vmware policy can browse for The Vm's, Transport type set to SAN and using Display name. Once a backup kicks off it fails with a 156 error, The bpfis log shows the below message “VMware_freeze: Unable to locate VMCFO_VDR” Thanks,Solved7.1KViews2likes6CommentsVMware delete snapshot failed
We are running Netbackup 7.6.0.2 on windows server 2008 SP1 R2. My problemis withthe VMs backup to msdp disk. The msdp disk is located in media server that also got Netbackup 7.6.0.2. Before we upgraded to 7.6.0.2 everything worked fine. Since the upgrade, I get now in some clients errors in delete snapshot after the backup. This is the Detiales status of the job that shows the error: 23/06/2014 18:35:36 - end Application Snapshot, Resources For Cleanup; elapsed time: 0:00:00 23/06/2014 18:35:36 - begin Application Snapshot, Delete Snapshot 23/06/2014 18:35:38 - started process bpbrm (10352) 23/06/2014 18:35:40 - Info bpbrm(pid=10352) Starting delete snapshot processing 23/06/2014 18:35:41 - Info bpfis(pid=11064) Backup started 23/06/2014 18:35:48 - Info bpbrm(pid=10352) INF - vmwareLogger: RegisterExtensionAPI: SYM_VMC_ERROR: SOAP_ERROR 23/06/2014 18:35:48 - Info bpbrm(pid=10352) INF - vmwareLogger: SOAP 1.1 fault: "":ServerFaultCode [no subcode] 23/06/2014 18:50:57 - Critical bpbrm(pid=10352) from client san-manager: VMware_thaw: VMware delete snapshot failed: Unrecognized error 23/06/2014 18:51:00 - Info bpfis(pid=11064) done. status: 0 23/06/2014 18:51:00 - end Application Snapshot, Delete Snapshot; elapsed time: 0:15:24 23/06/2014 18:51:00 - Info bpfis(pid=11064) done. status: 0: the requested operation was successfully completed 23/06/2014 18:51:00 - end writing Status 0 23/06/2014 18:51:00 - end operation Status 0 23/06/2014 18:51:00 - end operation the requested operation was successfully completed(0) Please adviseSolved7KViews2likes11Comments
