Veritas Cluster
I need to know the licensing method if i am planning to run 4 Node Window cluster on Virtual machine. 1) Physical Machine having Dual CPU with 12 core ( Intel Xeon E5). 2) Virtual Machine having 16 vcpu each . So need to understand how many license i need to buy to create 4 node Vertias Cluster and which license type . Quick help is appreciated.1.6KViews0likes5CommentsAfter vxvmconvert
Before running vxvmconvert, there is this pvscan PV /dev/sdb1 VG VG_DATA lvm2 [150.00 GiB / 50.00 GiB free] After running vxvmconvert the above is NOT reported by pvscan, as expected. This is reported: vxdisk list DEVICE TYPE DISK GROUP STATUS sda auto:LVM - - online invalid sdb auto:none - - online invalid sdb1 simple VG_DATA01 VG_DATA online My question is: Are sdb and sdb1 now different disks so that sdb can be initialized as a VxVM disk?1.4KViews0likes0CommentsInfoScale 7.0 for Windows: Installing InfoScale products using the VMware vSphere Client integrated option
In a VMware environment, after you install Symantec High Availability Console, Veritas InfoScale integrates with VMware vSphere Client and provides the following user interfaces: Install Guest Components option in the context menu Symantec High Availability Tab at a virtual machine level Symantec High Availability Dashboard at a VMware cluster or at a data center level These user interfaces can be used to perform the following InfoScale tasks through VMware vSphere Client: Manage InfoScale licenses Perform application monitoring administrative tasks Configure application monitoring in VMware SRM environment Until the 6.1 release of Symantec Storage Foundation and High Availability Solutions, you could install ApplicationHA and Veritas Cluster Server for Windows through VMware vSphere Client. With the 7.0 release, InfoScale product installation in a VMware environment using the VMware vSphere Client-integrated option is deprecated. The Install Guest Components option continues to appear in the context menu. However, you cannot install the InfoScale products using this option. The installation wizard does not list the InfoScale products on the Product Selection page. To install the InfoScale products use the product installer or the CLI. For information about installing the InfoScale products, see: Veritas InfoScale™ Installation and Upgrade Guide InfoScale documentation for other platforms can be found on the SORT website.520Views0likes0CommentsInfoScale 7.0 for Windows: Installing InfoScale products in physical and virtual environments
To install the InfoScale products use the product installer or the CLI. Use these methods to install the products in virtual as well as physical environments. In case of virtual environments, whether VMware or Hyper-V, the product installer or the CLI does not differ. The product installer lets you install the product on multiple systems at a time. Whereas, using the CLI you can install the product on a single system at a time. For information about installing the InfoScale products, see: Veritas InfoScale™ Installation and Upgrade Guide The installation guide is common across Windows platform. Virtualization platform-specific installation guides are not applicable on Windows. InfoScale documentation for other platforms can be found on the SORT website.414Views0likes0Commentsveritas infoscale - Error -383-50513-5760
Hi, i need a help. Am trying to add an AIX client and getting the following error. Can anyone help me out please. Error V-383-50513-5760Registration with Management Server failed [08/10/2015 15:41:00] [IPofmachine] {"JOB":{"RETURNCODE":-1,"ERROR":"CONFIGURE_MH_REG_FAILED","NAME":"job_add_host","OUTPUT":"","STATE":"FAILED","PROGRESS":100}}{"RESULT":{"RETURNCODE":-1,"UMI":"V-383-50513-5760","ERROR":"CONFIGURE_MH_REG_FAILED","NAME":"add_host","TASKID":"{kYKI8Id9bkrfn7B1}"}} [08/10/2015 15:41:01] [10.10.10.32] fancy_dead Thanks kamal1.3KViews0likes2CommentsProcess Agent
Hi all, I have configured SQL service group. I need a restart 1C application server after failover accours. For this purpose I will use script. The script will done 1 time after service group become online. I think process agent can help me. For test and understand how work proces agent I create easy bat script: { echo Hello > File.txt } When I do online for agent I see script is done (file File.txt is created) but the agent do not became online. I think script have to send any variable to VCS that VCS can know started programm is "UP". Do I correct understand situation and if YES what script must return to VCS?Solved1.7KViews0likes6CommentsVeritas InfoScale 7.0 (Linux and Windows): Changes in Dynamic Multi-Pathing for VMware
With the introduction of the Veritas InfoScale 7.0 product family, Dynamic Multi-Pathing (DMP) for VMware is now included as a component in the Veritas InfoScale Foundation, Storage, and Enterprise products. The license for this component is included as a part of the InfoScale license on both Linux and Windows. You can either use the Linux license or the Windows license to enable DMP functionality on the ESXi hypervisor. The DMP for VMware component consists of the following: vSphere offline DMP bundle — DMP components installed on the ESXi hypervisor vSphere UI plug-in — Installed on a Windows physical machine or on a virtual machine and serves as an interface between ESXi and vCenter Remote CLI package — Optional command-line interface to manage ESXi hosts from a Linux system or a Windows system The components can be installed using the command line or the VMware vSphere Update Manager. To install the Dynamic Multi-Pathing for VMware component on ESXi hosts, use one of the following: Veritas_InfoScale_Dynamic_Multi-Pathing_7.0_VMware.zip Veritas_InfoScale_Dynamic_Multi-Pathing_7.0_VMware.iso For more information on installing the DMP for VMware component, refer to the Dynamic Multi-Pathing 7.0 Installation Guide - VMware ESXi. From this release onwards: 1) DMP for VMware supports SanDisk (FusionIO) PCIe attached SSD cards. 2)TheDMP plug-in for the VMware vCenter web client: Displays I/O rate as a line graph. Displays the mapping of LUNs and VMDKs used by a virtual machine. Has a SmartPool tab for a virtual machine for easy configuration of SmartPool assigned to it. No longer requires ESXi login credentials in the Manage Device Support page. For more information about the features and enhancements, refer to the Dynamic Multi-Pathing 7.0 Administrator's Guide - VMware ESXi.756Views2likes1Commenthow LLT heartbeat setting MAC address ?
I was able to set theMAC addressin LLT , but its getting changed after every server reboot, Node A # lltstat -nvv | head -10 LLT node information: Node State Link Status Address * 0 node a OPEN vnet2 UP 00:14:4F:F8:3B:B7 vnet3 UP 00:14:4F:F9:73:DC -- vnet1 UP 00:14:4F:F8:F5:AC --- 1 node b OPEN vnet2 UP 00:14:4F:FA:2B:77 vnet3 UP 00:14:4F:FB:5E:07 -- vnet1 UP 00:14:4F:F9:E0:17 -- Node B # lltstat -nvv | head -10 LLT node information: Node State Link Status Address 0 node a OPEN vnet2 UP 00:14:4F:F8:3B:B7 vnet3 UP 00:14:4F:F9:73:DC -- vnet1 UP 00:14:4F:F8:F5:AC --- * 1 node b OPEN vnet2 UP 00:14:4F:FA:2B:77 vnet3 UP 00:14:4F:F9:E0:17 --- vnet1 UP 00:14:4F:FB:5E:07 ---- I got abovepost VCS instllation, So I followedbelow steps to change the MAC address for Vnet1 and Vnet3 gabconfig -U svcadm disable svc:/system/gab:default lltconfig -k disable svcadm disable svc:/system/llt:default svcadm enable svc:/system/llt:default lltconfig -k enable svcadm enable svc:/system/gab:default /sbin/gabconfig -c -n2 It has changed here, Node A: # lltstat -nvv | head -10 LLT node information: Node State Link Status Address * 0 node a OPEN vnet2 UP 00:14:4F:F8:3B:B7 vnet3 UP 00:14:4F:F9:73:DC vnet1 UP 00:14:4F:F8:F5:AC 1 node b OPEN vnet2 UP 00:14:4F:FA:2B:77 vnet3 UP 00:14:4F:FB:5E:07 vnet1 UP 00:14:4F:F9:E0:17 Node B # lltstat -nvv | head -10 LLT node information: Node State Link Status Address 0 node a OPEN vnet2 UP 00:14:4F:F8:3B:B7 vnet3 UP 00:14:4F:F9:73:DC vnet1 UP 00:14:4F:F8:F5:AC * 1 node b OPEN vnet2 UP 00:14:4F:FA:2B:77 vnet3 UP 00:14:4F:FB:5E:07 vnet1 UP 00:14:4F:F9:E0:17 but after server reboot went to orginal state of non-sync mode. where Vnet1's MAC and Vnet3's MAC changed. Any body know how the setting happens? how it is fetching and from where? how to make it permanent?Solved1.4KViews0likes2Commentscannot fit into memory
Hi, we were using Symantec Storage Foundation 6.0 on RHEL 6.4 , which is working fine. After upgrading Symantec Storage Foundation 6.2 , its hanging on console with “Error 28 selected item cannot fit into memory” any idea what could be the reason, any grub options which can help here ?? TIA -SSolved797Views0likes1CommentSFHA Solutions 6.2: New VCS configuration wizards introduced on AIX, Linux, and Solaris
The Symantec Cluster Server (VCS) Cluster Configuration Wizard and Symantec High Availability Configuration Wizard are introduced on all supported AIX, Linux and, Solaris distributions in this release. The two new wizards replace the Symantec High Availability Configuration Wizard. The earlier wizard provided a combined workflow for cluster configuration and application (high availability) configuration, and was supported only on Linux. You can launch the new wizards from the Symantec High Availability view. In a VMware virtual environment, you can launch the wizards from the Symantec High Availability view in the VMware vSphere Web Client. Symantec has recently launched an add-on for Veritas Operations Manager called Symantec HA Plug-in for vSphere Web Client. The add-on lets you integrate VCS and ApplicationHA tasks with VMware GUI, while eliminating the need to install the Symantec High Availability Console. For more information on the add-on, see the followingtechnical note. For steps to launch the VCS Cluster Configuration Wizard, see: Launching the VCS Cluster Configuration wizard (AIX,Linux,Solaris,) For steps to configure a cluster using the VCS Cluster Configuration wizard, see: Configuring a cluster by using the VCS Cluster configuration wizard (AIX,Linux,Solaris) For steps to launch the Symantec High Availability Configuration Wizard, see: Launching the Symantec High Availability Configuration wizard (AIX,Linux,Solaris) For steps to configure an application the wizard-based steps to configure the following applications for availability monitoring with VCS, see: Configuring application monitoring for generic applications (Linux,Solaris,AIX) Configuring the agent to monitor Oracle (Linux) Configuring the agent to monitor SAP (Linux) Configure the agent to monitor WebSphereMQ (Linux)444Views0likes0Comments