Instant Access for vmware problem
Hi, I have netbackup 10.4 to protect vmware workloads. my primary and media server are installed on rhel 8.10 and storage unit is msdp. when I create instant access virtual machine and start job I get this errors: error nbmwc /usr/openv/pdde/vpfs/bin/vpfs_actions failed (1): unable to importostimage. could not import the ost image id. /usr/openv/pdde/vpfs/bin/cata2map failed (38) failed to create an instant access virtual machine (vm). (4004) my storage is msdp and it's accessible. vcenter credential is ok and backup jobs are ok. in recovery target I changed display name and I checked create a new bios and instance uuid. vpfs_actions log: error system_utils._wrappedpopen /usr/openv/pdde/vpfs/bin/cata2map failed (38): error vpfs.fs.sharecommands could not import the ost image id /usr/openv/pdde/vpfs/bin/cata2map failed (38): error system_utils._utils unable to importostimage. could not import the ost image id. /usr/openv/pdde/vpfs/bin/cata2map failed (38) error system_utils._utils returning: 1 cata2map log: failed to mount loop device /dev/loop0 to /msdp/vol0/meta_dir/.../.../head with fstype xfs, err=38, msg = function not implemented. failed to mount dev_file /msdp/vol0/meta_bdev_dir/.../.../head to mnt /msdp/vol0/meta_dir/.../.../head, ret=38 failed to mount block device /msdp/vol0/meta_bdev_dir/.../.../head to /msdp/vol0/meta_dir/.../.../head, ret=38, msg = function not implemented failed to mount block device /msdp/vol0/meta_bdev_dir/.../.../head to /msdp/vol0/meta_dir/.../.../head, ret=38 mapobject::mountvolumes(): failed to mount head volumeSolved114Views0likes12Commentssetup Malware Scanning
Hi I have some questions: inNetBackup Security and Encryption Guide doc said: For BYO setup, Instant access must be configured on MSDP storage server See the "Configuring Universal share" section in Veritas NetBackup Deduplication Guide 1- what's MSDP BYO? if MSDP server is windows, is it BYO? in Veritas NetBackup Deduplication Guide doc said: MSDP build-your-own (BYO) server prerequisites and hardware requirements to configure universal shares: The universal share feature is supported on an MSDP BYO storage server with Red Hat Enterprise Linux 7.6 or later. The universal share feature is not supported on SUSE Linux. 2- if windos is BYO too, then how about Malware Scanning? is it possible or I should deploy Redhat MSDP??? I have a windows MSDP to backup vmware vms with accelerator feature and want to deploy Malware scanning Thanks in advance127Views0likes7CommentsNetBackup 8.3 WebUI Instant Access feature not enabled
Hi all, The latest episode on my epic adventure into the excitingly exotic world of NetBackup WebUI... After creating a MSDP storage server and disk pool for a Red Hat 8.2 media server (done inside the WebUI), when I click the MSDP storage server to drill down in to the properties, Instant Access is shown to be disabled, as shown in the image. Indeed, after a successfull backup of a VM in to the MSDP, the WebUI Instant Access feature cannot be used on the VM, only VM image or file-folder restores are possible for the VM. I've tested this on both Red Hat 8.2 and CentOS 7.6, and this issue happens in both cases. According to the documentation WebUI Instant Access for Red Hat based MSDP for VM backups should simply just work. Not sure what else to check. I'm wondering if this is because the Red Hat and CentOs Media Servers are VMware VMs? It's going to be a pain to have to prepare a physical Red Hat server just to test and possibly enable Instant Access if that's the case. Any ideas? Thanks all.Solved2.6KViews0likes3CommentsVeritas takes virtual to the next level with NetBackup 8.3
NetBackup has taken virtual data protection to the next level with the recent release of NetBackup 8.3, designed to optimize security, recover at speed, unify cloud capabilities, simplify even the most dynamic environments, and supercharge performance even in large environments.4.1KViews3likes0Comments