VVR paused due to network disconnection
- 10 years ago
Hi.
I confirm you that after the activity on our Firewall (the rules were ok, but they didn't work properly), the situation is ok now.
The KSTATE immediately switched from ENABLE to CONNECT and the sync was ok.
Thank you very much for your best support
BR
Tiziano
vxprint -P
Disk group: datadgTY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
rl datarlk datarvg CONNECT - - ACTIVE - -vxprint -P
Disk group: datadgTY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0
rl datarlk datarvg CONNECT - - ACTIVE - -- and then:
vradmin -g datadg repstatus datarvg
Replicated Data Set: datarvg
Primary:
Host name: 172.22.8.132
RVG name: datarvg
DG name: datadg
RVG state: enabled for I/O
Data volumes: 1
VSets: 0
SRL name: srl_vol
SRL size: 1.00 G
Total secondaries: 1Secondary:
Host name: 10.66.11.148
RVG name: datarvg
DG name: datadg
Data status: consistent, up-to-date
Replication status: replicating (connected)
Current mode: asynchronous
Logging to: SRL
Timestamp Information: behind by 0h 0m 0svxrlink -g datadg status datarlk
Thu Jan 29 09:29:02 2015
VxVM VVR vxrlink INFO V-5-1-4639 Rlink datarlk has 1 outstanding write, occupying 33 Kbytes (0%) on the SRLvxrlink -g datadg status datarlk
Thu Jan 29 09:29:07 2015
VxVM VVR vxrlink INFO V-5-1-4467 Rlink datarlk is up to date