Ok, I look at the control panel and the drive is that:
I go to the Hardware Compability List, and see that this Drive is Retiring from the Support:
I will try to restart the server in some days and look if it work. Thanks for your help.
You mentioned a library. Are you using a robotic tape library? If so, which one, as you need to look int he HCL for the robotic library and drive pair.
The section of the HCL in your screenshot:
1) is for stand-alone tape drives, not robot & drive pairs
2) says the support will be ending in the NEXT version of Backup Exec. The drive you pointed to would still be supported in this version of Backup Exec.
Larry_Fine wrote:You mentioned a library. Are you using a robotic tape library? If so, which one, as you need to look int he HCL for the robotic library and drive pair.
The section of the HCL in your screenshot:
1) is for stand-alone tape drives, not robot & drive pairs
2) says the support will be ending in the NEXT version of Backup Exec. The drive you pointed to would still be supported in this version of Backup Exec.
I´m use a Single Tape Driver inside a Dell Server with the version 16, and the HCL says: "The devices in this section will not be listed as supported in the Hardware Compatibility List for the next major Backup Exec release after Backup Exec 15", but it still working for some months, and stop to work on this week now.
