Forum Discussion
CraigV
13 years agoModerator
...just to expand on this a bit:
1. Your media server isn't a virtualised media server right? If so, there are some explicit conditions to meet, so read below:
2. Also make sure you haven't connected that library to a RAID controller...many vendors don't support that at all. It has to be connected to a SCSI card that is supported by that type of library. If it is an FC-attached library, make sure your server is zoned to see the robotics and the drive.
3. If the library is a SCSI library, check and make sure the terminator is securely connected, and that the SCSI cable is securely connected and not faulty.
Thanks!