Forum Discussion

Level 6

9 years ago

MULTINICB resource faulty and not getting cleared

Hi Team, I am seeing MultinicB resource fault as shown below D Ossfs Proxy ossfs_p1 et-coreg-admin2 D PubLan MultiNICB pub_mn...

business continuity

Troubleshooting

Dev_Roy
9 years ago
I see the failed flag is still present in the ifconfig output. Clear the FAILED flag from OS ( if_mpadm -d <interface>, if_mpadm -r <interface> ) and try clearing the fault once again.

# ifconfig -a
lo0: flags=1001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8131 index 1
        inet 117.0.0.1 netmask ff000000
bnxe0: flags=19040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FAILED> mtu 1500 index 1
        inet 10.106.111.66 netmask ffffff80 broadcast 10.106.111.117
        groupname pub_mnic
        ether 14:58:d0:54:18:18
bnxe0:1: flags=11000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,FAILED> mtu 1500 index 1
        inet 10.106.111.70 netmask ffffff80 broadcast 10.106.111.117
bnxe1: flags=19040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FAILED> mtu 1500 index 3
        inet 10.106.111.68 netmask ffffff80 broadcast 10.106.111.117
        groupname pub_mnic
        ether 14:58:d0:54:18:1c

Level 6

9 years ago

IP address associated with interface will be unavailable during this process, you will need to clear the FAULT and bring the resources online to bring the IPs back online.