Hi,
i update sfha 5.1sp1rp3 to sfha 6.0 and again had problems... i read this https://sort.symantec.com/public/documents/sfha/6.0/linux/productguides/html/sf_notes/ch01s08s01.htm
rhel 6.2 supported kernel 2.6.32-131.0.15.el6
ok,
~]# uname -a
Linux s-vrts-n1.nb.tst 2.6.32-131.0.15.el6.x86_64 #1 SMP Tue May 10 15:42:40 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux
but after upgrade
cat install.VRTSvxvm.s-vrts-n1
Preparing packages for installation...
VRTSvxvm-6.0.000.000-GA_RHEL6
Installing file /etc/init.d/vxvm-boot
creating VxVM device nodes under /dev
WARNING: No modules found for 2.6.32-131.0.15.el6.x86_64, using compatible modules for 2.6.32-71.el6.x86_64. FATAL: Error inserting vxspec (/lib/modules/2.6. 2-131.0.15.el6.x86_64/veritas/vxvm/vxspec.ko): Invalid argument ERROR: modprobe error for vxspec. See documentation.
warning: %post(VRTSvxvm-6.0.000.000-GA_RHEL6.x86_64) scriptlet failed, exit status 1
and
lltstat -nvv|more
LLT node information:
Node State Link Status Address
* 0 s-vrts-n1 OPEN
eth1 UP 00:04:23:DE:CA:2B
eth3 UP 68:05:CA:02:95:AF
eth0 UP 00:04:23:DE:CA:2A
1 s-vrts-n2 IDLE
eth1 DOWN
eth3 DOWN
eth0 DOWN
2 IDLE
....
and
cat start.llt.s-vrts-n1
1 11:05:16 ## Starting llt on s-vrts-n1
1 11:05:16 ## Begin prestart checking for llt on s-vrts-n1
1 11:05:16 cmd /bin/ls -d /etc/init.d/llt 2>/dev/null
1 11:05:16 cmd stdout=
/etc/init.d/llt
1 11:05:16 cmd exit=0 (duration: 0 seconds)
1 11:05:16 cmd /etc/init.d/llt status 2>&1
1 11:05:16 cmd stdout=
LLT module is not loaded
1 11:05:16 cmd exit=0 (duration: 0 seconds)
1 11:05:16 LLT not loaded on s-vrts-n1
1 11:05:16 ## The prestart checking return '0'
1 11:05:16 ## Begin starting llt on s-vrts-n1
1 11:05:16 cmd /etc/init.d/llt start 2>&1
1 11:05:26 cmd stdout=
Starting LLT:
LLT: loading module...
Loaded 2.6.32-71.el6.x86_64 on kernel 2.6.32-131.0.15.el6.x86_64
WARNING: No modules found for 2.6.32-131.0.15.el6.x86_64, using compatible modules for 2.6.32-71.el6.x86_64.
LLT: configuring module...
1 11:05:26 cmd exit=0 (duration: 10 seconds)
1 11:05:26 ## The start_sys() return '1'
1 11:05:26 ## Begin poststart checking for llt on s-vrts-n1
1 11:05:26 cmd /bin/ls -d /etc/init.d/llt 2>/dev/null
1 11:05:26 cmd stdout=
/etc/init.d/llt
1 11:05:26 cmd exit=0 (duration: 0 seconds)
1 11:05:26 cmd /etc/init.d/llt status 2>&1
1 11:05:26 cmd stdout=
LLT is loaded and configured
1 11:05:26 cmd exit=0 (duration: 0 seconds)
1 11:05:26 LLT configured on s-vrts-n1
1 11:05:26 ## The poststart checking return '1'
1 11:05:26 ## llt is successfully started on s-vrts-n1
1 11:05:26 ## The proc_start_sys() return '1'
# cat start.gab.s-vrts-n1
1 11:05:29 ## Starting gab on s-vrts-n1
1 11:05:29 ## Begin prestart checking for gab on s-vrts-n1
1 11:05:29 cmd /bin/ls -d /etc/init.d/gab 2>/dev/null
1 11:05:29 cmd stdout=
/etc/init.d/gab
1 11:05:29 cmd exit=0 (duration: 0 seconds)
1 11:05:29 cmd /etc/init.d/gab status 2>/dev/null
1 11:05:29 cmd stdout=
GAB module is not loaded
1 11:05:29 cmd exit=0 (duration: 0 seconds)
1 11:05:29 gab not loaded on s-vrts-n1
1 11:05:29 ## The prestart checking return '0'
1 11:05:29 ## Begin starting gab on s-vrts-n1
1 11:05:29 cmd /etc/init.d/gab start 2>&1
1 11:05:31 cmd stdout=
Starting GAB:
Loaded 2.6.32-71.el6.x86_64 on kernel 2.6.32-131.0.15.el6.x86_64
WARNING: No modules found for 2.6.32-131.0.15.el6.x86_64, using compatible modules for 2.6.32-71.el6.x86_64.
GAB /sbin/gabconfig ERROR V-15-2-25015 LLT not configured
1 11:05:31 cmd exit=0 (duration: 2 seconds)
1 11:05:31 ## The start_sys() return '1'
1 11:05:31 ## Begin poststart checking for gab on s-vrts-n1
1 11:05:31 cmd /bin/ls -d /etc/init.d/gab 2>/dev/null
1 11:05:31 cmd stdout=
/etc/init.d/gab
1 11:05:31 cmd exit=0 (duration: 0 seconds)
1 11:05:31 cmd /etc/init.d/gab status 2>/dev/null
1 11:05:31 cmd stdout=
GAB is loaded
1 11:05:31 cmd exit=0 (duration: 0 seconds)
1 11:05:31 gab loaded but not configured on s-vrts-n1
1 11:05:31 ## The poststart checking return '0'
1 11:05:41 ## Sleep 10, and do poststart checking again
1 11:05:41 cmd /bin/ls -d /etc/init.d/gab 2>/dev/null
1 11:05:42 cmd stdout=
/etc/init.d/gab
1 11:05:42 cmd exit=0 (duration: 1 seconds)
1 11:05:42 cmd /etc/init.d/gab status 2>/dev/null
1 11:05:42 cmd stdout=
GAB is loaded
1 11:05:42 cmd exit=0 (duration: 0 seconds)
1 11:05:42 gab loaded but not configured on s-vrts-n1
1 11:05:42 ## The poststart checking return '0'
1 11:05:42 ## gab is not successfully started on s-vrts-n1
1 11:05:42 ## The proc_start_sys() return '0'
Hm, ok LLT not configured.. but
]# cat /etc/llttab
set-node s-vrts-n1
set-cluster 1
link eth1 eth-00:04:23:de:ca:2b - ether - -
link eth3 eth-68:05:ca:02:95:af - ether - -
link-lowpri eth0 eth-00:04:23:de:ca:2a - ether - -
and
]# cat /etc/llthosts
0 s-vrts-n1
1 s-vrts-n2