Dev,
No luck I'm afraid. Carried out the above steps but still see this extra path. The server is in an cluster so have tried this on both servers, but with differing results against the same disk...
Inquiry for /dev/rdsk/c4t500507630518853Ad2s2, evpd 0x0, page code 0x0
Vendor id : IBM
Product id : 2107900
Revision : .220
Serial Number : 75FGVD11D2B
fuj413:/root#fuj413:/root# vxdisk list c4t500507630518853Ad2s2
Device: c4t500507630518853Ad2s2
devicetag: c4t500507630518853Ad2
type: auto
hostid: fuj413
disk: name=b05_1D2B id=1188382829.17.fuj413
group: name=l149dg00 id=1188383028.21.fuj413
info: format=sliced,privoffset=1,pubslice=4,privslice=3
flags: online ready private autoconfig noautoimport imported
pubpaths: block=/dev/vx/dmp/c4t500507630518853Ad2s4 char=/dev/vx/rdmp/c4t500507630518853Ad2s4
privpaths: block=/dev/vx/dmp/c4t500507630518853Ad2s3 char=/dev/vx/rdmp/c4t500507630518853Ad2s3
version: 2.1
iosize: min=512 (bytes) max=2048 (blocks)
public: slice=4 offset=0 len=31447680 disk_offset=5760
private: slice=3 offset=1 len=3583 disk_offset=1920
update: time=1271069157 seqno=0.274
ssb: actual_seqno=0.0
headers: 0 248
configs: count=1 len=2615
logs: count=1 len=396
Defined regions:
config priv 000017-000247[000231]: copy=01 offset=000000 enabled
config priv 000249-002632[002384]: copy=01 offset=000231 enabled
log priv 002633-003028[000396]: copy=01 offset=000000 enabled
Multipathing information:
numpaths: 2
c4t500507630518853Ad2s2 state=enabled
c6t500507630508853Ad2s2 state=enabled
fuj413:/root#
fuj413:/root# vxdmpadm getdmpnode nodename=c4t500507630518853Ad2s2
NAME STATE ENCLR-TYPE PATHS ENBL DSBL ENCLR-NAME
=========================================================================
c4t500507630518853Ad2s2 ENABLED IBM_DS8x00 3 1 2 IBM_DS8x001
fuj413:/root#
fuj413:/root# /etc/vx/diag.d/vxdmpinq /dev/rdsk/c4t500507630518853Ad2s2
fuj414:/root# vxdisk list c4t500507630518853Ad2s2
Device: c4t500507630518853Ad2s2
devicetag: c4t500507630518853Ad2
type: auto
hostid: fuj413
disk: name= id=1188382829.17.fuj413
group: name=l149dg00 id=1188383028.21.fuj413
info: format=sliced,privoffset=1,pubslice=4,privslice=3
flags: online ready private autoconfig noautoimport
pubpaths: block=/dev/vx/dmp/c4t500507630518853Ad2s4 char=/dev/vx/rdmp/c4t500507630518853Ad2s4
privpaths: block=/dev/vx/dmp/c4t500507630518853Ad2s3 char=/dev/vx/rdmp/c4t500507630518853Ad2s3
version: 2.1
iosize: min=512 (bytes) max=2048 (blocks)
public: slice=4 offset=0 len=31447680 disk_offset=5760
private: slice=3 offset=1 len=3583 disk_offset=1920
update: time=1271069157 seqno=0.274
ssb: actual_seqno=0.0
headers: 0 248
configs: count=1 len=2615
logs: count=1 len=396
Defined regions:
config priv 000017-000247[000231]: copy=01 offset=000000 enabled
config priv 000249-002632[002384]: copy=01 offset=000231 enabled
log priv 002633-003028[000396]: copy=01 offset=000000 enabled
Multipathing information:
numpaths: 2
c4t500507630518853Ad2s2 state=enabled
c6t500507630508853Ad2s2 state=enabled
fuj414:/root#
fuj414:/root# /usr/sbin/vxdmpadm getdmpnode nodename=c4t500507630518853Ad2s2
NAME STATE ENCLR-TYPE PATHS ENBL DSBL ENCLR-NAME
=========================================================================
c4t500507630518853Ad2s2 ENABLED IBM_DS8x00 3 2 1 IBM_DS8x001
fuj414:/root#
fuj414:/root# /etc/vx/diag.d/vxdmpinq /dev/rdsk/c4t500507630518853Ad2s2
Inquiry for /dev/rdsk/c4t500507630518853Ad2s2, evpd 0x0, page code 0x0
Vendor id : IBM
Product id : 2107900
Revision : .220
Serial Number : 75FGVD11D2B
fuj414:/root#
I get this on a disk that's in use in a volume group on one server, but visible to both because of the cluster, but also on a disk that's not in any disk group but visible to both servers.
I haven't tried a reconfigure boot yet as was hoping to avoid that if possible as there are other things in use on the servers outside of the cluster. If you've no other ideas then I'll go with that.
Thanks again for your help.
Cheers
Phil.