Forum Discussion

nbuengr2's avatar
nbuengr2
Level 4
10 years ago

Adding Media Server

Hi All, Currently our customer will add a new media server on their NBU Master server, the problem is that, when they use the Device Config Wizard on the master server, the new media server cant b...
7.5
Backing Up
Backup and Recovery
Basics
NetBackup
  • Marianne's avatar
    Marianne
    10 years ago
    They need to add SERVER entry for new server in bp.conf on the master and restart NBU. Hopefully media server was installed correctly with the master specified as master and EMM server? Library based tape drive license added? SSO license if drives are shared? After confirming above, check connectivity with these commands on the master server : nbemmcmd -listhosts -verbose nbemmcmd -getemmserver If media server is listed correctly in output, go ahead with Device config.
Pritesh_Pisal's avatar
Pritesh_Pisal
Level 5
10 years ago

other way just check if you are able to see the the media server entry in 

master server hostproperties-->servers--> Media server tab

if entry is not there then add it and then check for the following command out 

nbemmcmd -listhosts -verbose

if media server is listed then run the device configuration and check