monu
15 years agoLevel 3
Automatic Cleaning from ACS
HI All,
we have setup of veritas netbackup 6.5.5 which is attached to SL8500 Library through ACLS server.
I want to configure automatice cleaning of drives after specific hours. but when i am doing this auto cleaning with "tpclean" command it is not sworking.
what is the best way of autocleaning in ACLS server enviroment.....
plz suggest.....
Warm Thanks in advance....
gaurav
- Extract from http://seer.entsupport.symantec.com/docs/267306.htm:
ACSLS TAPE CLEANING
ACS robot types are self cleaning. Tape cleaning should not be initiated by NetBackup. If a TapeAlert-based cleaning flag is set by LTID or avrd for an ACS, TLH, or an LMF drive, the vmd/DA will not release the drives.To disable TapeAlert checking and eliminate "TapeAlert is not supported" messages in the syslog, add the NO_TAPEALERT touch file.For UNIX:/usr/openv/volmgr/database/NO_TAPEALERTFor Windows:<install path>\volmgr\database\NO_TAPEALERTThe StorageTek library transport control unit tracks how much tape passes through each transport and sends a message to ACSLS when a transport requires cleaning. If auto-cleaning is enabled, ACSLS automatically mounts a cleaning cartridge on the transport. If all the cleaning cartridges have expired (MAX_USAGE), ACSLS will post an error message 376N into the acsss_event log. If auto-cleaning is disabled, ACSLS logs a message in the event log and displays a message at the cmd_proc when cleaning is required.This option is enabled or disabled using the acsss_config configuration utility. This utility will allow you to specify how the cartridges are ordered for selection and queries.NOTE: You cannot use the acsss_config configuration program to enable auto-cleaning for drives attached to a SCSI connected library storage module (LSM).For more information regarding ACSLS tape cleaning, please contact SUN/StorageTek.