pkvyas1983
13 years agoLevel 4
error requesting media (tpreq)(98)
Hi All,
I am getting the error 98 while cleaning the tape drive. Please check the below logs & provide the solution .
Job Logs:-
7/17/2012 8:21:54 PM - granted resource CLNU01
7/17/2012 8:21...
- 12 years ago
Barcode looks good - looks like standard clening tape barcode.
This is the same as putting the tape in the drive by hand
m s28 d2
Initiating MOVE_MEDIUM from address 1027 to 501
move_medium failed
sense key = 0x5, asc = 0x30, ascq = 0x0, INCOMPATIBLE MEDIUM INSTALLEDThis is hardware error
TLD(0) key = 0x5, asc = 0x30, ascq = 0x0, INCOMPATIBLE MEDIUM INSTALLED
For some reason, the drive does not like the tape.
Could be a firmware issue, or drive issue, or tape issue.
It was working before you say, so very odd, but it is not working now, and that error cannot be caused by netbackup.
I recommend you speak with the hardware vendor for advice.
Martin