Forum Discussion

Jeff_Talamini's avatar
Jeff_Talamini
Level 3
16 years ago

NetBackup & Open File option?

We had a server (serverA) with Windows 2003 server running BackupExec 10.1 with a local tape drive and the open file agent. After the tape drive failed on that server I moved the backup to our NetBackup 6.0 MP7 server running Windows 2003. The backups are working, partially, as it's skipping  some open files used by one of the primary applications on serverA. The error I'm receiving is:

Warning bpbrm(pid=3716) from client serverA: WRN - can't open file: path of open file and file name (Win32: the process cannot access the file because it is being used by another process.)

Am I missing an open file option in NetBackup?
Thanks for any help.

Jeff
7.1.x and Earlier
Agents
Backup and Recovery
Configuring
NetBackup
  • Jacob's avatar
    Jacob
    16 years ago
    It is quite a common error.

    Have the backup client in question been rebooted since you installed NetBackup? You will need to reboot to enable VSP (Open file manager).

    As it is a win2003 client you might want to use VSS instead or VSP during backup (properties on master server, client attributes, select the client and look in the open files tab).

    If the file still can't be backup'ed you might want to figure out if it an important file if you need to restore at some point.
  • Jacob's avatar
    Jacob
    Level 4
    16 years ago
    It is quite a common error.

    Have the backup client in question been rebooted since you installed NetBackup? You will need to reboot to enable VSP (Open file manager).

    As it is a win2003 client you might want to use VSS instead or VSP during backup (properties on master server, client attributes, select the client and look in the open files tab).

    If the file still can't be backup'ed you might want to figure out if it an important file if you need to restore at some point.
  • Jeff_Talamini's avatar
    Jeff_Talamini
    Level 3
    16 years ago

    Jacob,

    Thank you for the response. The server has not been restarted since the install of the client. I will do that this evening and post the results of the scheduled backup after the restart.

    thank you again,

    Jeff

  • J_H_Is_gone's avatar
    J_H_Is_gone
    Level 6
    16 years ago
    Just keep in mind that some files you will just not be able to get.
    Even with open file turned on it still needs to find an idle time to get it.

    archive.pst's is one of them that never goes idle - so if someone is still logged on when my backup runs I do not get the file and I get the message that it was busy.

  • Jeff_Talamini's avatar
    Jeff_Talamini
    Level 3
    16 years ago
    Restarting the client worked and last night's backup succeded with no errors (open files).
    Thank you,

    Jeff