Forum Discussion

jbach2003's avatar
jbach2003
Level 3
12 years ago

Netbackup 6.0MP7 Hardware Refresh

So I took an image of our current NetBackup machine to prep for a hardware refresh.

I used a solution for hardware independent restoring, and was able to move the image over to the other machine with new upgraded hardware. The OS boots, everything is good.

The Netbackup Administration Console fires up, and sees itself as the Master Server. However, when I click on Activity Monitor, I STILL get errors about "Unable to contact the EMM Server". I even exported the entire registry off of the old server, and imported into the new box, but still, 3 services will not start:

 

1. Adaptive Server Anywhere - VERITAS_NB

2. NetBackup Enterprise Media Manager

3. NetBackup Resource Broker

 

The new box has the same exact PC name, same exact IP, same everything except for hardware. Logs don't give me any clear errors. Any advice?

Netbackup 6.0MP7 on Server 2003 x86

7.1.x and Earlier
Backup and Recovery
NetBackup
Tip-How to
Troubleshooting

4 Replies

Sort By
  • sksujeet's avatar
    sksujeet
    Level 6
    12 years ago

    Never did it before though it seems you have taken a ghost image and put it on other hardware. On the master server try nbdb_ping. Does it show the database live?

  • Mark_Solutions's avatar
    Mark_Solutions
    Level 6
    12 years ago

    I agree with Marianne that it sounds like the NetBackup database is not consistent and so will not start - which causes everything else to not start.

    If you are going to ghost it you would need all netbackup processes, including PBX in a down state and a check that no nb* or bp* processes were running.

    Any restored images would also need to be mounted on the new server using the same drive letters

    Hope this helps

  • jbach2003's avatar
    jbach2003
    Level 3
    12 years ago

    Well maybe that's my issue, because I didn't stop any NBU services when I took the image. All of the drive letters are the same, and Marianne has already advised me about PC name/IP address. I'll try taking another image with the NBU services stopped and try again. Thanks again everyone.