Netbackup 7.1 + Netapp filer FAS2040 + HP MSL 2024 SCSI Tape Library
Hello,
I'm trying to setup backups for the Netapp Filer FAS2040 using a HP MSL 2024 SCSI Tape Library. This is a brand new setup.
The details are as follows.
Master Backup Server - DellR610
OS - Win 2008 R2
Tape Library - MSL 2024 tape Library with 1 HP MSL LTO-4 Ultrium 1760 SCSI Drive
Filer - Netapp filer FAS2040 with FC Connectivity.
I'm trying to connect the Tape Library to the Filer, but not sure what component can be used as the Library is a SCSI whereas the filer is a FC.
Please see the attached photo for better understanding of what I'm trying to achieve.
I would appreciate if some one can help me out with this or point me in the right direction.
Many Thanks
Tosh
According to the link below the MSL2024 has 1 fibre channel interface
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06b/12169-304612-304622-304622-304622-3936307-4159601-4159602.html?dnr=1
If you don't have a SAN switch you may need the HP StorageWorks SAN router :
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00719796&lang=en&cc=us&taskId=101&prodSeriesId=1849322&prodTypeId=329290
Under all circumstance I think you will need a SAN hba on the media server as well. SCSI cables don't work very well becuase of the limited lenth. LVD SCSI is only 6 meters where as FC go 500M.