Forum Discussion

Lumpi's avatar
Lumpi
Level 4
6 years ago

Register Linux boot media on DR site master server

Hello

I have a new Linux bood media on one of our linux media servers. I would like to register this ISO on the master server in the DR Test site. The master server on both sites is a windows 2008 Server. I need the entry on the master to test a BMR of a Linux Server. Without the entry I cannot do a "prepare to restore" operation.

As far as I know, I do not need a network SRT in case of a disaster if I have a boot media? Right?

Is it possible to do a bmrpans -operation dump -table srt -xml and import it on the other master server?

8.1.2
  • Michal_Mikulik1's avatar
    Michal_Mikulik1
    6 years ago

    Hello,

    I have reviewed my notes from former BMR tests and you are right - BMR Linux boots without Prepare To Restore action ended with errors. For example, "Failed to retrieve /tmp/HEX.conf".

    ISO images are not simply "movable" from one BMR Master to another. I think, you must do as a minimum:

    - register a SuSE Boot Server in NBU DR domain (I am not sure if you can register one Boot Server in 2 different NBU domains, probably not)

    - create a Network SRT here, or export Network SRT from existing SuSE Boot Server in another NBU domain and import it to SuSE Boot in DR domain (only Netwotk SRTs are exportable/importable, not ISO SRTs)

    - create an ISO image from the Network one

    - go on with Prepare To restore

    regards

    Michal

     

  • Michal_Mikulik1's avatar
    Michal_Mikulik1
    Moderator
    6 years ago

    Hello,

    there is no need to "register" ISO boot image in DR site. However you will have more manual work then. You can just "take it" and boot from it supposing at least 1 BMR valid backup was replicated to the DR site. But you cannot perform "prepare to restore" procedure, and thus you cannot perfrom Automatic BMR Restore, just Generic BMR Restore - more clicking with IP configs, fingerprints, tokens, etc.

    Regards

    Michal

    • Lumpi's avatar
      Lumpi
      Level 4
      6 years ago

      The server I have to restore is a Linux SLES12. I don't have to do a "prepare to restore" for Windows clients but I think I have to do it for Linux clients. Or am I wrong? 

      • Michal_Mikulik1's avatar
        Michal_Mikulik1
        Moderator
        6 years ago

        Hello,

        I have reviewed my notes from former BMR tests and you are right - BMR Linux boots without Prepare To Restore action ended with errors. For example, "Failed to retrieve /tmp/HEX.conf".

        ISO images are not simply "movable" from one BMR Master to another. I think, you must do as a minimum:

        - register a SuSE Boot Server in NBU DR domain (I am not sure if you can register one Boot Server in 2 different NBU domains, probably not)

        - create a Network SRT here, or export Network SRT from existing SuSE Boot Server in another NBU domain and import it to SuSE Boot in DR domain (only Netwotk SRTs are exportable/importable, not ISO SRTs)

        - create an ISO image from the Network one

        - go on with Prepare To restore

        regards

        Michal