BTW, also found the error 119. DELL Utility and W95 FAT32 has the problem. BMR doesn't support this kind of file system?
119:
1/27/2014 17:26:45.918 [ParseClientInformation.cpp:ParseClientInformation()] Client command '/bin/cat /usr/openv/netbackup/baremetal/client//diskImport.list 2>/dev/null | /usr/bin/xargs /sbin/fdisk -lu 2>/dev/null' failed with exit code 123
1/27/2014 17:26:45.918 [ParseClientInformation.cpp:ParseClientInformation()] Critical function failed. OutputType = FDISK_NUM.
OS:linux
OSLevel:6.1
BMRVersion:7.5.0.5
Command:/bin/cat /usr/openv/netbackup/baremetal/client//diskImport.list 2>/dev/null | /usr/bin/xargs /sbin/fdisk -lu 2>/dev/null
OutputType:40
Key1:
Key2:
Key3:
Key4:
Key5:
ExitCode:123
+++ START BMR DATA +++
Device Boot Start End Blocks Id System
/dev/mapper/mpathap1 63 369494 184716 de Dell Utility
/dev/mapper/mpathap2 * 369495 4578524 2104515 b W95 FAT32
/dev/mapper/mpathap3 4579328 5603327 512000 83 Linux
Partition 3 does not end on cylinder boundary.
/dev/mapper/mpathap4 5603328 285474815 139935744 5 Extended
/dev/mapper/mpathap5 5605376 285474815 139934720 8e Linux LVM
Disk /dev/mapper/mpathap1: 189 MB, 189149184 bytes
255 heads, 63 sectors/track, 22 cylinders, total 369432 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8a42b4c3
This doesn't look like a partition table
Probably you selected the wrong device.
BMR support W95 FAT32 filesystem or not?
119:
1/27/2014 17:26:45.918 [ParseClientInformation.cpp:ParseClientInformation()] Client command '/bin/cat /usr/openv/netbackup/baremetal/client//diskImport.list 2>/dev/null | /usr/bin/xargs /sbin/fdisk -lu 2>/dev/null' failed with exit code 123
1/27/2014 17:26:45.918 [ParseClientInformation.cpp:ParseClientInformation()] Critical function failed. OutputType = FDISK_NUM.
OS:linux
OSLevel:6.1
BMRVersion:7.5.0.5
Command:/bin/cat /usr/openv/netbackup/baremetal/client//diskImport.list 2>/dev/null | /usr/bin/xargs /sbin/fdisk -lu 2>/dev/null
OutputType:40
Key1:
Key2:
Key3:
Key4:
Key5:
ExitCode:123
+++ START BMR DATA +++
Device Boot Start End Blocks Id System
/dev/mapper/mpathap1 63 369494 184716 de Dell Utility
/dev/mapper/mpathap2 * 369495 4578524 2104515 b W95 FAT32
/dev/mapper/mpathap3 4579328 5603327 512000 83 Linux
Partition 3 does not end on cylinder boundary.
/dev/mapper/mpathap4 5603328 285474815 139935744 5 Extended
/dev/mapper/mpathap5 5605376 285474815 139934720 8e Linux LVM
Disk /dev/mapper/mpathap1: 189 MB, 189149184 bytes
255 heads, 63 sectors/track, 22 cylinders, total 369432 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8a42b4c3
This doesn't look like a partition table
Probably you selected the wrong device.