Disk group need to import by manual after power off the server
thanks for re-sending the log.
here is my log analysis and some comments.
the system *02 (node ID 1) was restarted at the time below
018/09/25 09:43:15 VCS NOTICE V-16-1-10322 System imduaedms02 (Node '1') changed state from RUNNING to LEAVING
2018/09/25 09:43:17 VCS INFO V-16-1-10494 System imduaedms02 not in RUNNING state
the system *01 was also restarted:
2018/09/25 09:43:43 VCS NOTICE V-16-1-10322 System imduaedms01 (Node '0') changed state from RUNNING to LEAVING
so had was stopped on both nodes!
node *01 came up and had started from local build:
2018/09/25 11:58:07 VCS NOTICE V-16-1-10322 System imduaedms01 (Node '0') changed state from LOCAL_BUILD to RUNNING
the node *02 joined by remote build, after 2 seconds:
2018/09/25 11:58:09 VCS NOTICE V-16-1-10322 System imduaedms02 (Node '1') changed state from REMOTE_BUILD to RUNNING
it took a while for vxconfigd to enter cluster mode so the following errors were logged:
2018/09/25 11:58:10 VCS ERROR V-16-10001-1005 (imduaedms01) CVMCluster:???:monitor:node - state: out of cluster
2018/09/25 11:58:10 VCS INFO V-16-1-10304 Resource cvm_clus (Owner: unknown, Group: cvm) is offline on imduaedms01 (First probe)
2018/09/25 11:58:10 VCS INFO V-16-1-10304 Resource qlogckd (Owner: unknown, Group: cvm) is offline on imduaedms01 (First probe)
the errorsl like one below
2018/09/25 11:58:11 VCS ERROR V-16-10001-1005 (imduaedms02) CVMCluster:???:monitor:node - state: out of cluster
logged because cvm was down
dg import error:
2018/09/25 11:58:38 VCS ERROR V-16-10001-1009 (imduaedms01) CVMVolDg:CDG_dms2_datadg:online:could not find diskgroup dms2_datadg imported. If it was previously deported, it will have to be manually imported
2018/09/25 11:58:39 VCS INFO V-16-2-13001 (imduaedms01) Resource(CDG_dms2_datadg): Output of the completed operation (online)
VxVM vxprint ERROR V-5-1-582 Disk group dms2_datadg: No such disk group
for the cvm dg import issue logged above, please refer to this technote: https://www.veritas.com/support/en_US/article.000029451
now the cvm master is up and system *01 is tyhe new cvm master:
2018/09/25 12:30:11 VCS INFO V-16-10001-1003 (imduaedms01) CVMCluster:cvm_clus:online:CVMCluster role is - mode: enabled: cluster active - MASTER
master: imduaedms01
Once the cvm master node is up and the slave node joined, you should be able to manually import the shared dgs on both nodes.
Your VCS is very old: 4.1 on Sol 9
2018/09/25 12:51:54 VCS NOTICE V-16-1-11022 VCS engine (had) started
2018/09/25 12:51:54 VCS NOTICE V-16-1-11050 VCS engine version=4.1
2018/09/25 12:51:54 VCS NOTICE V-16-1-11051 VCS engine join version=4.1007
2018/09/25 12:51:54 VCS NOTICE V-16-1-11052 VCS engine pstamp=4.1 11/10/06-22:09:00
2018/09/25 12:51:54 VCS NOTICE V-16-1-10114 Opening GAB library
2018/09/25 12:51:54 VCS NOTICE V-16-1-10619 'HAD' starting on: imduaedms01
and Sol is 9:
2018/09/25 09:43:18 VCS INFO V-16-2-13001 (imduaedms02) Resource(JavaMethodServer): Output of the completed operation (offline)
Sun Microsystems Inc. SunOS 5.9 Generic May 2002
Both the OS and VCS are no longer supported versions!
In summary, you need to check and make sure the followings are all OK:
1. VCS resource dependency
2. storage connectivity from both the cluster nodes
3. CVMTimeout is set to a value long enough fir cvm to be onlined - https://sort.veritas.com/public/documents/sf/5.0/hpux11iv3/html/sfrac_install/ap_sfrac_install_cvmcfsagent5.html
Hopefully the above data analysis and the technote help
Cheers,
Frank
