Forum Discussion

symsonu's avatar
symsonu
Level 6
11 years ago

disk in error state in vxdisk list

disk replacement was performed for  c1t2d0s2 and after that we are not able to add this disk into dg.

I can see duplicate entry of c1t2d0s2 in vxdisk list

 

abcmas3{root} #: vxdisk list
DEVICE       TYPE            DISK         GROUP        STATUS
c1t1d0s2     auto:none       -            -            online invalid
c1t2d0s2     auto            -            -            error
c1t2d0s2     auto            -            -            error
c1t3d0s2     auto:none       -            -            online invalid
c1t4d0s2     auto:none       -            -            online invalid
c1t5d0s2     auto:none       -            -            online invalid
c1t8d0s2     auto:none       -            -            online invalid
c1t9d0s2     auto:sliced     disk2mirr    datadg        online
c1t10d0s2    auto:sliced     disk3mirr    datadg        online
c1t11d0s2    auto:sliced     disk4mirr    datadg        online
c1t13d0s2    auto:sliced     disk5mirr    datadg        online
c2t0d0s2     auto:none       -            -            online invalid
c2t12d0s2    auto:sliced     disk6mirr    datadg        online

 

I tried to lable c1t2d0 and then vxdctl enable , it dinot come to invalid online.

 

what should be the way forward here?

 

 

 

 

  •  

    Now, there is only one entry as shown below, however its in error state.

    c1t1d0s2     auto:sliced     disk2        datadg        online
    c1t2d0s2     auto            -            -            error
    c1t3d0s2     auto:sliced     disk4        datadg        online
    c1t4d0s2     auto:sliced     disk5        datadg        online
    c1t5d0s2     auto:sliced     disk6        datadg        online
    c1t8d0s2     auto:none       -            -            online invalid
    c1t9d0s2     auto:sliced     disk2mirr    datadg        online
    c1t10d0s2    auto:sliced     disk3mirr    datadg        online
    c1t11d0s2    auto:sliced     disk4mirr    datadg        online
    c1t13d0s2    auto:sliced     disk5mirr    datadg        online
    c2t0d0s2     auto:none       -            -            online invalid
    c2t2d0s2     auto:none       -            -            online invalid
    c2t12d0s2    auto:sliced     disk6mirr    datadg        online

    Version is as below :-->

     

     

    30  1391850  3ae18 312   1  vxdmp (VxVM 5.0_MP1_RP5: DMP Driver)
     32 7c002000 340ec8 313   1  vxio (VxVM 5.0_MP1_RP5 I/O driver)
     34 7bfe4000   a2c8 316   1  fdd (VxQIO 5.0_REV-5.0MP1RP4a5_sol Q)
     35  13c87e0    d40 314   1  vxspec (VxVM 5.0_MP1_RP5 control/status)
     82 7b200000 1bd5a8  21   1  vxfs (VxFS 5.0_REV-5.0MP1RP4a5_sol Su)
    232 7afb9180    c38 315   1  vxportal (VxFS 5.0_REV-5.0MP1RP4a5_sol po)

  • Hi

    Is this disk a new disk ?

    Is the disk visible to the o/s ? does it have a VTOC/label ?

    Can you show the output of

           vxdisk list <disk>

    As Marianne mentioned 5.0 has reached EOSL

    cheers

    tony

  • Hi, 

      

    1. make sure device tree is clean, and disk  is ok:

    #devfsadm –Cv                                                                           

    use dd read to test if disk is ok:

     

     # dd if=/dev/rdsk/c1t2d0s2 of=/dev/null bs=1024k count=100

     

    2. get  prtvtoc for the disk:

    # prtvtoc /dev/rdsk/c1t2d0s2   

     

    3.make sure the disk is proper labled.

    # cfgadm –alo show_FCP_dev

    # echo label > /tmp/fmt ; format –d c#t#d# -s –f /tmp/fmt                       << Label the LUN ( c#t#d# ) prior to updating VxVM

     

     

    4.refer http://www.symantec.com/docs/TECH57018

    freeze vcs sg, 

    # mv disk.info disk.backup

    # mv array.info array.backup

    # rm /dev/vx/dmp/*

    # rm /dev/vx/rdmp/*

     #rm /dev/dsk/c#t#d#s# <------Remove all entries except for internal boot devices.
    #rm /dev/rdsk/c#t#d#s# <-------Remove all entries except for internal boot devices.
    #devfsadm -Cv 
    #vxconfigd -k