Upgrading OpenSSL in NetBackup
Hello, I'm having a security issue with NetBackup. Basically I need to upgrade the installed version of OpenSSL that came with NetBackup. If the OpenSSL is not effected by the current and past vulnerabilities then I need to see document from Symantec. Theses are the files I need to upgrade /usr/openv/pdde/pdopensource/bin/.bin/openssl /usr/openv/pdde/pdopensource/bin/openssl OpenSSL 0.9.8y This is the version I need to be up to date. OpenSSL 0.9.8za OpenSSL 1.0.0m OpenSSL 1.0.1h I have had this issue before. Below is a link to by earlier post asking this question. http://www.symantec.com/connect/forums/openssl-use-netbackup-7102 I have had this same issue with Java before. This the Symantec fix http://www.symantec.com/business/support/index?page=content&id=TECH148257 This fix is to use the OpenSSL that the OS is using. Is there a way to do this for SSL? I have opened a ticket with support and they don't know anything. They are not able to help me. Can someone help me secure my sever.Solved1.8KViews0likes9Comments
NetBackup and TSM 6.2 running on DELL PowerEdge R710
Good Morning everyone. Has anyone built a server to run both NetBackup 7.1 and TSM 6.2 on a DELL PowerEdge R710 server or something similar. I am curious of how many fiber adapters, memory and disk space had been allocated. Any help would be greatly appreciated. TodSolved1.1KViews2likes8Comments
Moving old db/image/ClientX from 6.5 to 7.5 and trying to restore
Morning Colleagues... I have a dilema which I feel I am in big trouble with... maybe you can help... We had an old system; MASTER_A with v6.5 and approximately 1TB catalog. We got new hardware: MASTER_B with v6.5. We did NOT migrate the old catalog from MASTER_A into this system. We started a FRESH system per se. This system was eventually upgraded to v7.5.0.3 and that's the current version... also about ~1TB Catalog MASTER_A is now offline and decommissioned, however all tapes are still available and we kept the db/images folders from that system. And of course, now we need to do a restore from MASTER_A with the old version of 6.5. In the past, we were able to simple move db/images around to different systems and be able to restore or use ALTPATH to that secondary image folder and restore what we needed. Now that in 7.5, the db was modified and Image Metadatawas moved into NBDB..etc... we tried to move an old db/image/client folder into the current active path of the images, and of course as you guessed.. the restore gui doesnt see our little friends: green circle with check mark or blue circle with + mark... etc... I was able to locate this article: http://www.symantec.com/business/support/index?page=content&id=TECH198295 Which I read as: during the ugprade from 6.5 to 7.5..some users that used ALTPATH may not have properly migrated all their imagesand those images are currently not restorable.. but install 7.5.0.4 to resolve this? Am I reading this correctly? Or, higher powers forbit...do I need to build another 6.5 system to do arestore?!?! Thanks for your input/suggestions/condolences, Jiman K.Solved1.1KViews0likes4Comments
NDMP_XDR_DECODE_ERR
I have a Solaris 10 master/media server running 7.0.1and a Solaris 10media server (7.0.1) with a direct connected C4 Tape library. . . a;sldkfja;sldfj I am trying to backup a NetApp partition to the aforementioned C4 Tape Library using an NDMP policy. Getting the following: Dec 6, 2011 7:40:01 AM - estimated 0 kbytes needed Dec 6, 2011 7:40:02 AM - started process bpbrm (pid=20725) Dec 6, 2011 7:40:02 AM - connecting Dec 6, 2011 7:40:02 AM - connected; connect time: 0:00:00 Dec 6, 2011 7:40:04 AM - mounting X109L2 Dec 6, 2011 7:40:47 AM - mounted X109L2; mount time: 0:00:43 Dec 6, 2011 7:40:47 AM - positioning X109L2 to file 1 Dec 6, 2011 7:40:54 AM - positioned X109L2; position time: 0:00:07 Dec 6, 2011 7:40:54 AM - begin writing Dec 6, 2011 10:39:10 AM - Error ndmpagent (pid=20730) connection 0x100301ca0 ndmp_message_process_one_failed, status = NDMP_XDR_DECODE_ERR Dec 6, 2011 10:39:10 AM - Error ndmpagent (pid=20730) eof is set - connection 0x100301ca0 Dec 6, 2011 10:39:10 AM - Error ndmpagent (pid=20730) NDMP backup failed, path = /vol/v2011_3/ Dec 6, 2011 10:39:10 AM - Error ndmpagent (pid=20730) ndmp_data_get_state_failed, status = 12 (NDMP_EOF_ERR) Dec 6, 2011 10:40:48 AM - end writing; write time: 2:59:54 NDMP backup failure (99) Does anyone have any experience with this? Ever seen this? Any help would be greatly appreciated. rickSolved5.2KViews1like4CommentsInstall 7.0 client on Windows 7
I have Netbackup 7.0 serverinstalled on a Solaris server and Netbackup 7.0 client installed only on Solaris clients. The only software I have is what I downloaded: nb_7.0_solaris_sparc64_1.of.3.tar nb_7.0_solaris_sparc64_2.of.3.tar nb_7.0_solaris_sparc64_3.of.3.tar Does anyone know of a way of installing the Windows client from these files vice the media kit? I no longer have any version of the Windows DVD from the media kit. thanks in advance, rickSolved787Views0likes2CommentsIncorrect Inventory of C4 library
I have a Solaris 10 master/media server running 7.0.1and a Solaris 10media server (7.0.1) with a direct connected C4 Tape library. Recently I had Oracle replace the hand in the library. I did an inventory from the library's admin console, moved tapes from slot to slot, slot to drive and did a scsi "mt" and saw the tape in the drive. In Netbackup, I removed the drives, storage devices and robot and ran the "Configure Storage Devices" wizard. When I did an "Inventory Robot..."->"Show contents"->"Start" I see only 2 of the 36 slots: Robot Contents Slot Tape Barcode === ==== ====== 1No 2 No When I do a "Preview volume configuration changes I get, "Volume configuration is up-to-date with robot contents. I stopped and restarted the daemons on both the master and media server that the library is connected to. Not sure what to do next aside from removing the media server and readding it. Any suggestions would be greatly appreciated.Solved1.2KViews0likes7CommentsStatus 58 Can't connect to client
I have a Solaris 10 master and media server, a Solaris 10 media server with a C4 library direct connected. I am trying to do an NDMP backup from a Netapp filer on the same network. So, this is considered a remote NDMP backup. When I attempt to do a backup, I get the followingin the Admin Console on the master server: Error bpbrm (pid=21078) cannot connect to filer3, Operation now in progress (150) can't connect to client (58). There is no bpbrm messages on the master but on the media server, the bpbrm log contains: job_disconnect: Disconnected ConnectionCache::connectAndCache: Acquiring new connection for host alabama, query type 1 vnet_pbxConnect: pbxConnectEx Succeeded logconnections: BPDBM CONNECT FROM 138.109.248.35.43190 TO 138.109.250.180.1556 fd = 5 db_end: Need to collect reply verify_client: bpbrm.c.34470: start_bpcd_stat failed: 58 58 0x0000003a bpbrm main: bpbrm.c.2782: verify_client failed: 58 58 0x0000003a bpbrm kill_child_process: start OpenMailPipe: /usr/ucb/mail... bpbrm Exit: client backup EXIT STATUS 58: can't connect to client Any suggestions would be greatly appreciated.Solved2.3KViews0likes5Comments
restoring deleted Hyper-V machine
i had a backup for a Hyper-V machine by netbackup 7.1 , client 6.5.4 , but this virtual machine was deleted from the host server due to disk damage, i replace the damage disk and i tried to restore the Hyper-V machine i got an error code 24 , i need a solution it's urgent due to it's a production server520Views0likes1CommentAdd new tape library
I have a master server version 7.0.1 running on a Solaris 10 boxwith a direct connected SL48 tape library attached that performs all of our local backups. I would like to attach a C4 library to one of the Solaris clients in another building to do myNetApp filer backups. The C4 library is attached to the client and I can see the library and the drives from the OS. What process do I need to perform to allow this server to do the filer backups.If there is a library attached to it, does it need to have a mediaserver installed on it? Do I need to install the master on it as well? Where do I define the robot and drives? From the original master server? Do Ineed to create anything from the new server side console? I've read I need to update the bp.confs on both sides. With what?Please, if any one has any direction for me, I'd appreciate it. thanks, rickSolved2.9KViews1like20Comments
restoring deleted Hyper-V machine
i had a backup for a Hyper-V machine by netbackup 7.1 , client 6.5.4 , but this virtual machine was deleted from the host server due to disk damage, i replace the damage disk and i tried to restore the Hyper-V machine i got an error code 24 , i need a solution it's urgent due to it's a production server