Firmware & BIOS levels NBU 5230 Appliances
Hi, We are running several NBU 5230 Appliances (Current version 2.6.1.1) From support we have heard that our (RAID) firmware and BIOS levels are not current. My questions: What RAID firmware should we be running? What BIOS level should the 5230 units have? Do disk firmware levels also need updating and what level should they have? If RAID firmware is updated, should drivers be running a certain version as well? If yes, what version is best? Where can we obtain these updates? If we would go to 2.6.1.2, will any firmware/BIOS levels be updated during the upgrade process? (Probably not, I suspect) Has anybody performed these upgrades and encountered any issues? Thanks for any help! FredSolved7.6KViews0likes8CommentsCannot place my files on mapping network drives with Appliance 5220
Hello I want to upgrade my Appliance 5220 to lastet version (2.6.0.1) but I got a problem with \install path. I opened CIFS share by the stepMain_Menu > Manage > Software > Share Openand can map //<Appliance hostname>/install path with my PC but when I placed my patch files from local into its, it has an error like in the picture.Solved4.7KViews3likes7CommentsUnable to connect to CIFS share on 5230 appliance
I have enabled the incoming_patches share on the NetBackup 5230 appliance, but I cannot open it. I am unable to authenticate, even though I know that I am entering the correct username and password. What is the domain that should be supplied in the login credentials if ldap authentication is not enabled on the appliance?Solved3.5KViews0likes3CommentsNetBackup 5200/5220 Appliances 2.5.1 is now available!
I'm very pleased to announce that the next Maintenance Release for NetBackup 7.5 and Release Update for NetBackup 52x0 Appliances is now available! NetBackup 7.5.0.4 is the fourth maintenance release for NetBackup 7.5. It is a cumulative release containing fixes and content from 7.5.0.1 through 7.5.0.3. In addition, this release contains an additional 315 fixes (bringing the total fixes in 7.5.0.4 to over 700!) including the most commonly downloaded EEBs, several customer escalations, and internal engineering defects. The simultaneously released NetBackup 5200/5220 Appliances 2.5.1 Release Update is the equivalent Appliance patch release to NetBackup 7.5.0.4. The significant content of NetBackup 7.5.0.4 is: No new features in 7.5.0.4. However, some features that were delivered in previous maintenance releases are included: Solaris 11 master server, Bare Metal Restore server and OpsCenter Managed Server support – delivered in 7.5.0.3 NetBackup for VMware on SLES – delivered in 7.5.0.2 PureDisk seeding utility – delivered in 7.5.0.2 Client Direct Whole Image Mode – delivered in 7.1.0.4 Multi-process nbostpxy for Client Dedupe – delivered in 7.1.0.4 Fixes included in EVERY publicly available 7.5.0.3 hotfix are included in 7.5.0.4 Other miscellaneous fixes across NetBackup which were not publicly released Additional content applicable to Appliances 2.5.1 is: Improved agent for proactive support Support for OST 3rd party plug-ins Information about 2.5.1 is available here: NetBackup 5200/5220 2.5.1 Update http://symantec.com/docs/TECH197011 The 2.5.1 Update can only be applied to an Appliance already running at version 2.5. To check to see if your particular Etrack is resolved in 2.5.1 (NetBackup 7.5.0.4), please refer to both sets of Release Notes: NetBackup 7.5.0.4 Release Notes http://symantec.com/docs/DOC5514 NetBackup Appliance 2.5.1 Release Notes for NetBackup 52xx http://symantec.com/docs/DOC57973.4KViews2likes46CommentsNetBackup Appliances 2.6.1.2 is now available!
(crossposted from the Netting Out NetBackup blog) I’m extremely happy to announce that NetBackup Appliances 2.6.1.2 is now Generally Available! NetBackup Appliances 2.6.1.2 is the latest update for NetBackup 52xx and 5330 Applainces and the equivalent Appliance patch release to NetBackup 7.6.1.2. It can be applied in an upgrade to Appliances running ANY 2.5.x or 2.6.x.x version. This release includes all fixes included in the NetBackup 7.6.1.2 release, including resolutions for most commonly downloaded EEBs, customer escalations, and critical internally found defects. To download 2.6.1.2, please visit the following page: NetBackup Appliance 2.6.1.2 Release http://symantec.com/docs/TECH228624 More information on 2.6.1.2 can be found at the following locations: NetBackup Appliances 2.6.1.2 Release Notes http://symantec.com/docs/DOC8185 Complete Symantec NetBackup Appliance Documentation Set - 2.6.1.2 versions http://symantec.com/docs/DOC8194 The NetBackup Appliances Late Breaking News can be found here: NetBackup 5xxx appliance series Late Breaking News http://symantec.com/docs/TECH145136 Short link: http://bit.ly/APPLBN Bookmark the NetBackup Appliances Common Topics page to have these and many more useful links handy: http://go.symantec.com/nba bit.ly/761LBN | APPLBN | 76LBN3.3KViews3likes11CommentsNetBackup Appliance 5220, root path is used 100%
Hello Product: NetBackup Appliance 5220 Version: 2.6.0.1 Role: [Master Server, Media Server] Description: Recieved a data that sent by AIR from Main NetBackup Environment and store to MSDP. My Appliance has got a problem since 3 day ago. It is too slow when access by Java Console and Web Console. Almostcommandson SSH also got a problem too. (Even reboot or shutdown command) Later, I found system root path(/) isfull and maybecaused by /tmpreferences fromhttps://support.symantec.com/en_US/article.TECH217535.html From document, it suggest toupdate version to2.6.0.3 but Will itcauseany problems with AIR? (Main NetBackup Environment also 7.6.0.1) I try to manually delete /tmp inner files but Permission not passed. How can I resolve thisproblem?Solved2.9KViews0likes6CommentsConfiguring AIR between two NBU domains using NetBackup Appliance 5230
Hi Support, Kindly advice me because I'm a bit confused. I am about to configure AIR between two NetBackup domains, domainA has 1xNBU5230 plus 1x5030 disk shelf, anddomainBhas 1xNBU5230 plus 1x5030 disk shelf. Also both NetBackup domain will be backing up clients seperately, however customer still wants image-data replicated to the target or secondary domain. My question is how can I then configure AIR btw these domains, since each NBU domain isbacking upclients data tothe MSDP pool which is suppose to be used for AIR configuration. Thanks in advance, FelixSolved2.5KViews1like7CommentsRe-Image Netbackup Appliance 5230
Hi All , I have Netbackup Appliance 5230 , i need to recover it by using USB but the original usb that came with the appliance is missing also the raid of server has been rebuild so there is no image currently running on . could you please Mention me the URL for origanal Image not Fixes or patchsrealse . Thanks ,Solved2.4KViews0likes3CommentsNetBackup Appliances 2.6.0.2 is now available!
(crossposted from the Netting Out NetBackup blog) I’m extremely happy to announce that NetBackup Appliances 2.6.0.2 is now Generally Available! NetBackup 2.6.0.2 is the latest update for NetBackup 52xx Appliances and the equivalent Appliance patch release to NetBackup 7.6.0.2. It can be applied in an upgrade to Appliances running ANY 2.5.x or 2.6.0.x version. This release includes all 568 fixes included in the NetBackup 7.6.0.2 release, including resolutions for most commonly downloaded EEBs, customer escalations, and critical internally found defects. The 2.6.0.2 release also contains: Customer High Impact Fixes including: Network setting retained during factory reset Allow eth0 configuration (was restricted in 2.6.0.1) No NetBackup restart with storage resize Multi-stream backups for migration tool fixed Clean job cancellation for migration tool SNMP packages added back to allow SNMP daemons to run on Appliance Support for VMware Dynamic Multi-Pathing (DMP) Multiple Security Improvements - most notably, removal/update of all OpenSSL components potentially affected by "Heartbleed" Install/Upgrade client patch size reduction and direct upgrades from 2.5.x to 2.6.0.2 CallHome/Supportability enhancements including: Improved monitoring of BBU/SuperCap status Additional CallHome data including the list of installed EEBs and NetBackup version information. CallHome performance improvement through lesser round trips (increased packet size from 8KB to 256KB). Disk SMART errors in the support logs for improved diagnostics To download 2.6.0.2, please visit the following page: NetBackup Appliance 2.6.0.2 Release http://symantec.com/docs/TECH215209 To check to see if your particular Etrack is resolved in NetBackup 7.6.0.2, please refer to these Release Notes: Symantec NetBackup 52xx Appliance Release Notes - Release 2.6.0.2 http://symantec.com/docs/DOC7156 The documentation pack for this release can be found here: Complete Symantec NetBackup 52xx Appliance Documentation Set - Release 2.6.0.2 http://symantec.com/docs/DOC7158 The NetBackup Appliances Late Breaking News can be found here: NetBackup 5xxx appliance series Late Breaking News http://symantec.com/docs/TECH145136 Bookmark the NetBackup Appliances Common Topics page to have these and many more useful links handy: http://go.symantec.com/nba Finally, more information on this release can be found by accessing the NetBackup 7.6.0.2 release announcement, which is also available here on Connect: http://www.symantec.com/connect/blogs/netbackup-7602-netbackup-76-maintenance-release-2-now-available --2.2KViews0likes18CommentsNetBackup Appliance upgrade 2.6.0.3 did not take effect
Hello Support Team, I recently upgraded my appliance version from 2.6.0.1 to version 2.6.0.3. However, the upgrade did not work. Before the upgrade I copied the image SYMC_NBAPP_update-2.6.0.3-1.x86_64.rpm into the appliance /inst/patch/incoming directory. I was able to view the image using the CLISH "list downloded" command. However, the upgrade completed successfully, but when I tried the check the appliance new version after upgrade I got the same old version displayed: 2.6.0.1 When I run the command upgradestatus, I got the output below: "appliance version 2.6.0.1 is not in upgrade state" Please I need help what could be wrong. NB: This is a new set of appliances, and they need to be upgraded before going into production. Regards, FelixSolved2KViews1like12Comments