upgrade SFHA
Hi All, Regarding the need of configuring DR with VVR we have purchase the new licence Infoscale 7.1 Can we upgrade from SFHA 6.1 to Veritas Infoscale Enterprise 7.1? if not what are the best method to preserve data when installing the new product. Thanks in advance.1.8KViews0likes0Comments
vvr replication not ok .....need help to fix it
Hello, Replication is not happening , however RVG is enabled /active and Rlink is conect/active .... below are the details :--> -> vxprint -Pl Disk group: ossdg Rlink: to_sec_site_ossrvg info: timeout=500 packet_size=1452 rid=0.113591 latency_high_mark=10000 latency_low_mark=9950 bandwidth_limit=none state: state=ACTIVE synchronous=off latencyprot=off srlprot=autodcm assoc: rvg=ossrvg remote_host=sec_site-ossrvg IP_addr=10.52.214.68 port=4145 remote_dg=ossdg remote_dg_dgid=1444153050.96.secmas1o remote_rvg_version=30 remote_rlink=to_prisite_ossrvg remote_rlink_rid=0.1263 local_host=prisite-ossrvg IP_addr=10.52.214.67 port=4145 protocol: UDP/IP flags: write enabled attached consistent connected asynchronous dcm_logging -> vradmin -g ossdg repstatus ossrvg Replicated Data Set: ossrvg Primary: Host name: prisite-ossrvg RVG name: ossrvg DG name: ossdg RVG state: enabled for I/O Data volumes: 20 VSets: 0 SRL name: oss_srl_vol SRL size: 300.00 G Total secondaries: 1 Secondary: Host name: sec_site-ossrvg RVG name: ossrvg DG name: ossdg Data status: consistent, behind Replication status: logging to DCM (needs dcm resynchronization) Current mode: asynchronous Logging to: DCM (contains 61101728 Kbytes) (SRL protection logging) Timestamp Information: N/A -> vxrvg -g ossdg cplist ossrvg Name MBytes % Log Started/Completed ---- ------ ------ ----------------- point1 <Checkpoint overflowed> -> vxrlink -g ossdg status to_sec_site_ossrvg DCM is in use on rlink to_sec_site_ossrvg. DCM contains 61101728 Kbytes (19%) of the Data Volume(s). -> vxrlink -g ossdg stats to_sec_site_ossrvg Messages Errors Flow Control -------- ------ ------------ # Blocks RT(msec) Timeout Stream Memory Delays NW Bytes NW Delay Timeout 1 0 0 0 0 0 0 100000 1 10 primas1o{root} #: vxprint -PV Disk group: ossdg TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0 rl to_sec_site_ossrvg ossrvg CONNECT - - ACTIVE - - rv ossrvg - ENABLED - - ACTIVE - - primas1o{root} #: vxrlink -g ossdg -i 5 status to_sec_site_ossrvg Mon Nov 30 17:24:01 2015 VxVM VVR vxrlink INFO V-5-1-12887 DCM is in use on rlink to_sec_site_ossrvg. DCM contains 61443008 Kbytes (19%) of the Data Volume(s). VxVM VVR vxrlink INFO V-5-1-12887 DCM is in use on rlink to_sec_site_ossrvg. DCM contains 61443008 Kbytes (19%) of the Data Volume(s). VxVM VVR vxrlink INFO V-5-1-12887 DCM is in use on rlink to_sec_site_ossrvg. DCM contains 61443040 Kbytes (19%) of the Data Volume(s). VxVM VVR vxrlink INFO V-5-1-12887 DCM is in use on rlink to_sec_site_ossrvg. DCM contains 61443232 Kbytes (19%) of the Data Volume(s). VxVM VVR vxrlink INFO V-5-1-12887 DCM is in use on rlink to_sec_site_ossrvg. DCM contains 61443232 Kbytes (19%) of the Data Volume(s). VxVM VVR vxrlink INFO V-5-1-12887 DCM is in use on rlink to_sec_site_ossrvg. DCM contains 61443264 Kbytes (19%) of the Data Volume(s). ^Cprimas1o{root} #: ===================================================================================================================== Secondary ======================================================= -> vxprint -Pl Disk group: ossdg Rlink: to_prisite_ossrvg info: timeout=500 packet_size=1452 rid=0.1263 latency_high_mark=10000 latency_low_mark=9950 bandwidth_limit=none state: state=ACTIVE synchronous=off latencyprot=off srlprot=autodcm assoc: rvg=ossrvg remote_host=prisite-ossrvg IP_addr=10.52.214.67 port=4145 remote_dg=ossdg remote_dg_dgid=1327928106.32.secmas1o remote_rvg_version=30 remote_rlink=to_sec_site_ossrvg remote_rlink_rid=0.113591 local_host=sec_site-ossrvg IP_addr=10.52.214.68 port=4145 protocol: UDP/IP flags: write enabled attached consistent connected -> vradmin -g ossdg repstatus ossrvg Replicated Data Set: ossrvg Primary: Host name: prisite-ossrvg RVG name: ossrvg DG name: ossdg RVG state: enabled for I/O Data volumes: 20 VSets: 0 SRL name: oss_srl_vol SRL size: 300.00 G Total secondaries: 1 Secondary: Host name: sec_site-ossrvg RVG name: ossrvg DG name: ossdg Data status: consistent, behind Replication status: logging to DCM (needs dcm resynchronization) Current mode: asynchronous Logging to: DCM (contains 61442560 Kbytes) (SRL protection logging) Timestamp Information: N/A -> vxrvg -g ossdg cplist ossrvg The cplist command can only be used on a primary rvg -> vxrlink -g ossdg status to_prisite_ossrvg The status command can only be used on a primary rlink -> vxrlink -g ossdg stats to_prisite_ossrvg Messages Errors Flow Control -------- ------ ------------ # Blocks RT(msec) Timeout Stream Memory Delays NW Bytes NW Delay Timeout 334089805 0 0 1927960 0 0 0 100000 1 10 Also, I ran the below command to check rlink bandwidth usgae and it is 0% utilised Cprimas1o{root} #: vrstat -R Mon Nov 30 17:43:49 2015 Replicated Data Set ossrvg: Data Status: sec_site-ossrvg: DCM contains 61543520 Kbytes. Network Statistics: Messages Errors Flow Control -------- ------ ------------ # Blocks RT(msec) Timeout Stream Memory Delays NW Bytes NW Delay Timeout primas1o 1 0 0 0 0 0 0 100000 1 10 Mon Nov 30 17:43:59 2015 Replicated Data Set ossrvg: Data Status: sec_site-ossrvg: DCM contains 61543552 Kbytes. Network Statistics: Messages Errors Flow Control -------- ------ ------------ # Blocks RT(msec) Timeout Stream Memory Delays NW Bytes NW Delay Timeout primas1o 0 0 0 0 0 0 0 100000 1 10 Bandwidth Utilization 0.00 Kbps. I am wondering if rlink in connect/active state then why its not replicating ? Regards SSolved3.3KViews0likes6CommentsHow to re-create RVG
I have mistankly deleted 2 disks that were used as cachevol for secondary RVG and datain secondary become unaccessible, for that i went through deletingthe DG and succeeded. now i am trying to create RVG group again, for that i should delete both RVG in main and DR which seems impossible, even dissociate SRL volume from primary RVG seems impossible any hint please? BR,Solved2.2KViews0likes6Commentsneed to fix vvr replication
Earlier node 1 was primary and node2 was secondary Node1 crashed and node 2 become primary. Now, we have brought node1 up as below and below is the status of rlink Please provide fix root@node1:# vradmin -g ossdg -l repstatus ossrvg Replicated Data Set: ossrvg Primary: Host name: punjab_core-ossrvg RVG name: ossrvg DG name: ossdg RVG state: enabled for I/O Data volumes: 24 VSets: 0 SRL name: oss_srl_vol SRL size: 400.00 G Total secondaries: 1 Config Errors: delhi_core-ossrvg: Primary-Primary configuration root@node1:# vxprint -PV Disk group: ossdg TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0 rl to_delhi_core_ossrvg ossrvg ENABLED - - PAUSE - - rv ossrvg - ENABLED - - ACTIVE - - root@node1:/ericsson/hagcs/etc# vxprint -Pl Disk group: ossdg Rlink: to_delhi_core_ossrvg info: timeout=500 packet_size=1452 rid=0.1329 latency_high_mark=10000 latency_low_mark=9950 bandwidth_limit=none state: state=PAUSE synchronous=off latencyprot=off srlprot=override assoc: rvg=ossrvg remote_host=delhi_core-ossrvg IP_addr=10.161.21.197 port=4145 remote_dg=ossdg remote_dg_dgid=1374151282.15.node1 remote_rvg_version=30 remote_rlink=to_punjab_core_ossrvg remote_rlink_rid=0.7142 local_host=punjab_core-ossrvg IP_addr=10.161.54.197 port=4145 protocol: UDP/IP flags: write enabled attached primary_paused consistent disconnected asynchronous root@node1:/ericsson/hagcs/etc# ========================================= root@node2:/ericsson/hagcs/etc# vradmin -g ossdg -l repstatus ossrvg Replicated Data Set: ossrvg Primary: Host name: delhi_core-ossrvg RVG name: ossrvg DG name: ossdg RVG state: enabled for I/O Data volumes: 24 VSets: 0 SRL name: oss_srl_vol SRL size: 400.00 G Total secondaries: 1 Config Errors: punjab_core-ossrvg: Primary-Primary configuration root@node2:/ericsson/hagcs/etc# vxprint -PV Disk group: ossdg TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0 rl to_punjab_core_ossrvg ossrvg ENABLED - - ACTIVE - - rv ossrvg - ENABLED - - ACTIVE - - root@node2:/ericsson/hagcs/etc# vxprint -Pl Disk group: ossdg Rlink: to_punjab_core_ossrvg info: timeout=500 packet_size=1452 rid=0.7142 latency_high_mark=10000 latency_low_mark=9950 bandwidth_limit=none state: state=ACTIVE synchronous=off latencyprot=off srlprot=autodcm assoc: rvg=ossrvg remote_host=punjab_core-ossrvg IP_addr=10.161.54.197 port=4145 remote_dg=ossdg remote_dg_dgid=1384451046.29.node2 remote_rvg_version=30 remote_rlink=to_delhi_core_ossrvg remote_rlink_rid=0.1329 local_host=delhi_core-ossrvg IP_addr=10.161.21.197 port=4145 protocol: UDP/IP checkpoint: point1 flags: write enabled attached consistent disconnected asynchronous dcm_logging resync_started root@node2:/ericsson/hagcs/etc# Please provide me fixSolved2.8KViews1like6Comments
Creating Parallel Service Group VVR on VCS 6.1
Dear All, I have 2 servers at the Production and 1 server at the DR site. I have 4TB data i want to replicate from Prod to DR using Veritas Volume Replicator. The volume I will need to replicate is a CFS volume mounted on both servers in the Production. What is the best way to replicate this volume? Regards, Thokozani MabasoSolved834Views0likes1Commentvvr primary -primary configuration error
Dear support when i execute vradmin repstatus <rvg>the command reports the configuration error: "Primary-Primary configuration" the data now is on the secondary site and i haven't possibility to switch to the primary site with GCO tools Please your feedbackon this situation ThanksSolved3.4KViews1like1CommentCluster GEO integration with VVR oracle database : steps order
I have 2 sites with the same config : 2 servers and storage. Each cluster have HA failover with Oracle database. I need to install Cluster GEO VVR to replicate Oracle data. My question is how to automate this configuration? Did i test first manually the VVR then I intagrate with the cluster Any Idea about the order and steps to automate this configuration Best regrads.Solved2.9KViews0likes9Commentssecondary rvg unknown
Hello, I did the full sync and now the status is as below root@atmas1o:/ericsson/hagcs/log# vradmin -l printrvg Replicated Data Set: ossrvg Primary: HostName: pallini-ossrvg <localhost> RvgName: ossrvg DgName: ossdg datavol_cnt: 24 vset_cnt: 0 srl: oss_srl_vol RLinks: name=to_metamorphosi_ossrvg, detached=on, synchronous=off Secondary: HostName: metamorphosi-ossrvg RvgName: ossrvg DgName: ossdg datavol_cnt: 24 vset_cnt: 0 srl: oss_srl_vol RLinks: name=to_pallini_ossrvg, detached=on, synchronous=off Secondary: HostName: metamorphosi-ossrvg RvgName: ossrvg DgName: ossdg datavol_cnt: 24 vset_cnt: 0 srl: oss_srl_vol RLinks: name=to_pallini_ossrvg, detached=on, synchronous=off Config Errors: metamorphosi-ossrvg: unknown root@atmas1o:/ericsson/hagcs/log# vradmin -g ossdg repstatus ossrvg Replicated Data Set: ossrvg Primary: Host name: pallini-ossrvg RVG name: ossrvg DG name: ossdg RVG state: enabled for I/O Data volumes: 24 VSets: 0 SRL name: oss_srl_vol SRL size: 200.00 G Total secondaries: 1 Secondary: Host name: metamorphosi-ossrvg RVG name: ossrvg DG name: ossdg Data status: inconsistent Replication status: stopped (primary detached) Current mode: N/A Logging to: SRL Timestamp Information: N/A Config Errors: metamorphosi-ossrvg: unknown root@atmas1o:/ericsson/hagcs/log# root@atmas1o:/ericsson/hagcs/log# vxrlink -g ossdg status to_metamorphosi_ossrvg VxVM VVR vxrlink INFO V-5-1-3539 Rlink to_metamorphosi_ossrvg is not currently attached (STALE). You have new mail in /var/mail/root root@atmas1o:/ericsson/hagcs/log# Now if i start replication with below command, will there be any impact, as the primary is not buffering data as this status is there from last night. vradmin -g ossdg -s startrep ossrvgSolved4.8KViews1like33Comments