encryption desktop not work after sleep
Hi please help me solve this problem. the encryption only work after reboot or resart. and its not work after its been in sleep. i already check from the option " unmount when computer goes to sleep" but its not work. my system is windows 8.1 64. forgive my bad english . Regards
Starting Out Ghost Solution Suite
I could use a little help/advice on getting started with Ghost Solution Suite 2.5. First off, I have the product installed on my PC and am finishing up one PC to create the image from. All the PC's that'll be receiving the image are identical. Can Ghost Casting be done over Wireless or is Ethernet the only way? How do I ensure the drivers are in my Ghost Boot disc that'll creat for each system? (Windows PE, Deploy Anywhere) Where do I go from here? I've read the forums, but am a little confused, I'm new at using Ghost Solution Suite and we have 175 pc's to image total. I'll be doing this onsite where each site will have about 20 pc's to image. I feel I have the basics down here, create image, create boot disc and include any drivers needed. Open Ghost Cast Server, create session, input location where image is at. Then in the boot disc, select Ghost Cast, enter session.... I haven't gotten any further yet, I'm beginning to set everything up and wanted anypointers/advice someone would provide. That way I can go in strong and have a better understanding. If I put this in the wrong community, I apologize in advance, I'm used to being able to Google whatever troubles I run into.
Unable Access Second Partition After Formatting Primary Partition
I recently had fully encrypted hard disk (Toshiba mq01abd075), operating system (Windows 7 Professional), two partition. C (146 GB) and D (548 GB) and 4 GB Unallocated space. I ran the system restore for partition C, after which I was unable to access the operating system. I reinstalled the operating system partition C. I installed PGP WDE, when I entered in the program, partition D does not appear to be decrypted. Partition D appears in My Computer (0 bytes), in computer management at disk management appear 548 GB RAW. If I double click on it ask me for Format, but i've never click Yes, so the second partition was never touch after the problem.After this I reinstalled twice the OS. Now I have windows 8.1 but stil,but still I have not touch the second partition. I've tried to decrypt the drive with a few tutorials such as(WinPE and put the hard disk as second partition): http://www.symantec.com/docs/TECH170574 http://www.symantec.com/business/support/index?page=content&id=TECH149478 Give me various errors suchs as: "Could not locate valid BGFS record. Recovey failed! Operation recover disk failed: Error code -11984 item not found" or "Disk 1 is not instrumented by bootguard" and others. I know was my fault. Please give me a solution. P.S: Sorry for my english, I'm not native and please move this topic if it was not posted properlySymantec Vendor Merchandise
Hello everyone, This might sound crazy but I haven't been able to find an answer elsewhere. As an administrator, I receive merchandise all the time from different vendors like Fluke, SourceFire, etc... Unfortunately, my main role is as an Altiris Engineer/Administrator and I don't even have a Symantec coffee cup! I live in Altiris at least 60 hours a week and have no swag to show for it! Can someone point me in the right direction? Thanks!
Infoblox and option 60
Hello In our Infoblox - environment the IP phones owns option 43. Hence i needed a way to point clients (Force boot) to Altiris PXE servers without IP helpers, while preserving IP phones option 43. Heres how i did: Our Altiris server is at ip 10.46.108.207 In Infoblox Hex the Altiris way this is 6:1:B:8:7:AA:AA:1:0A:2E:6C:CF (option 6=1=11 Option 8=7=AA AA(Altiris) 1 and ip in HEX) That is the "network" option 43 and bootfile is BStrap\\X86pc\\BStrap.0 bootserver is 10.46.108.207 -------- That accounts for the "Fixed Address" clients. Now the Scope (which includes the IP Phones): Global option 43 is normal option 43 for the IP Phones And then the trick :) IPv4 filter "option filter" ; set filter = option 60= PXEClient:Arch:00000:UNDI:00200 and the put the option 43 above AND the Bootfile settings above into this filter. Now the phones gets the unfiltered option 43 and the PXE clients gets the other... The above could have saved med hours and hours of headache. Hope it can halp somebodu out there.