Amazon S3 offline this device has not been discovered correctly
I have backup exec 15 running. When I first installed, I was able to connect to amazon S3 and backup data to a bucket that I created. This worked for a few days. Then all of a sudden the Amazon S3 storage device says "offline this device has not been discoveredcorrectly and to restart services. I restarted services, rebooted, removed/re-added, etc - and I can't figure it out. Not sure if there's a network communiaction issue between my amazon instance and S3 or what. It seems my config is correct because I was able to get it working for a few days. If I remove and re-add it seems to connect as it finds my S3 bucket, but the storage just stays offline. Not sure how to diagnoise.2.2KViews0likes6CommentsNIC Teaming Slow Throughput, any ideas?
Hey guys, We currently have 2Gig set up through NIC teaming for our backup exec setup.When we have backups running, it barely reaches 35-40% of the bandwith. I am using Backup Exec 2010. Has anyone else here set up NIC teaming before? What are some things that might cause slow performance? Are there any specific settings in Backup Exec that may help? Thanks!5.1KViews3likes9CommentsNBU client installation is getting failed on Linux machine.
While installing the NBU client binaries on Redhat Linux machine getting library file issue. Error :- error while loading shared libraries: libacl.so.1: cannot open shared object file: No such file or directory tar failed unpacking /tmp/bp.27062/bin_net.tar on . Cannot complete the client install. client_config_failed # uname -a Linux XXXXXX 2.6.32-279.el6.x86_64 #1 SMP Wed Jun 13 18:24:36 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux I need experts suggestion here what can be done to get this resolved.Solved1.6KViews0likes2CommentsHP Tape device is detected as Disk device type in solaris machine.
Hi All, Need one hep from all experts here. one of tape drive from HP ESL library is connected to Solaris server and it is detecting as Diskdevice not as tape device. actaully it should be tape devices as it is physical tape drive. Pos Port_ID Hard_Addr Port WWN Node WWN Type 0 150200 0 2001001321443ed4 2000001321443ed4 0x1 (Tape device) 1 150300 0 2004001321443ed4 2003001321443ed4 0x0 (Disk device) 2 158500 0 200d001321443102 200c001321443102 0x1 (Tape device) cfgadm O/P:- c8::2004001321443ed4 unavailable connected configured unknown need experts suggestions here what can be done to get this done. or anyone faced this kind of issue. Thanks MaheshSolved992Views0likes2CommentsBackup Exec 2014 (or 2012) AWS Storage Gateway problems
I need assistance from someone who has successfully implemented the AWS Storage Gateway-VTL in either Backup Exec 2012 or in Backup Exec 2014. On the AWS site, it shows that BE 2012 is a supported application for their Storage Gateway-VTL. On the Key feature list for BE 2014 is shows that AWS Storage Gateway is supported. I have not been able to get the VTL to work properly in either. The problem I am having is that the robotic library (an STK L700) shows up, all 10 of the tape drives show up (ULT3580-TD5), but the drives are not listed under the library. There are drives under the library, but they are all in red and have a "missing device" error. I have tried for the last 3 days to work with Symantec support to resolve this. They claim that the library is support and the drives are supported, but the drives are not support inside of the library. They provided links to the HCL for both BE 2012 and BE 2014 to prove their point. So, I asked them why their key new feature matrix for 2014 show support for AWS Storage Gateway and the setup documentation in AWS shows a screenshot of the drives under the library in BE 2012. They didn't have an answer for this. They are now telling me that instead of working with me to resolve my issue, they are instead working with the marketing group to remove support for AWS from the feature list. WTF?!? The support group is either unwilling or unable to connect me with the product team so that I can get some clarification on what components of the Storage Gateway is supported (besides the VTL, there is also a disk based gateway). So, if anyone out there has successfully connected their BE installation to the AWS Storage Gateway I would greatly appreciate it if you shared the "secret sauce". Thanks, ALM2.9KViews1like21CommentsBE 2010 Backup Method
Hi there, We have Backup Exec 2010. I want to backup VMDK, but not enough free space in vDisk. Backup method, before storage, and then carries the BE server's disk. I just want to back up to the BE server disk. What can I do. Thanks, Merhaba, Bizim bir Backup Exec 2010 var. Ben VMDK yedekleme istiyorum, fakat vdisk içinde yeterli boş alan yok. Yedekleme metodu, önce storage, sonra BE server diske taşımaktadır. Ben sadece BE sunucu diskine yedeklemek istiyorum. Ne yapabilirim. Teşekkürler.396Views1like1CommentCannot backup to tape with backup exec 2012
Hello, So I've been trying for more than a week now to backup to tape with backup exec and I'm close to abandonning this program. I always get the same error message : "Physical volume library drive not found". I tried a few things on the net like reinstalling the tape drivers, updating the firmware, running as administrator. It seemed to me like people were saying that the tape driver doesn't work. So I tried installing Uranium backup in trial version and could create a backup that works with my tape right away. So what is the problem with backup exec?393Views0likes2CommentsMy backup job to robot tapes ended up with status=96
Hi My backup jobs that backup to robot has ended with exiting [status=96unable to allocate new media for backup, storage unit has none available] I think it may be cause by tape's labels because it didn't have a problem before I change my label with the new one I used the commandavailable_mediato check out all tapes but all of it areavailablestatus with new label's barcodes. Could someone help me? Thank youSolved588Views0likes2CommentsMail Alert for exchange servers
How can I configure mail alert for exchange server backups status with following details Exchange server name along with the storage group detail as I need to confirm each storage group backup started as per schedule. My Master server was Linux and Netbackup version was 7.5 is there any possible was to run script to call the storage group detail from NBU master server.Solved1.6KViews1like5Comments