Recent Discussions
Cleanup folder (Appliance_Dedupe\history\segments)
On our appliance 3600 not free space on storage, and not run deduplication cleanup procedure. In folder (Appliance_Dedupe\history\segments) use 150Gb of space. May be safety cleanup this folder (Appliance_Dedupe\history\segments) ?kroligoff18 years agoLevel 3831Views0likes1CommentBE3600 R2 > R3 upgrade PowerShell "Upgrade-Appliance" CommandNotFoundException
Hi, Backup Appliance 3600 Upgraded R2 > R3. What I have worked on is: Exec 2012 Live update (service pack4, Hotfix 217347) Backup_Exec_3600_Appliance_3.0_R3_ML.iso file download and extract to External hard disk. And at the remote server, I ran Powershell. Enable-PSRemoting > Y set-item wsman:\localhost\Client\TrustedHosts -value "*" > Y Enter-PSSession -ComputerName <BE IP>-Configuration appliance -Credential administrator > password Upgrade-Appliance >The term 'Upgrade-Appliance' is not recognized as the name of a cmdlet, functio n, script file, or operable program. Check the spelling of the name, or if a pa th was included, verify that the path is correct and try again. + CategoryInfo : + FullyQualifiedErrorId : CommandNotFoundException I refer to this document. https://www.veritas.com/support/en_US/article.000091417 But "Upgrade-Appliance" Command not found. Please reply to me the wrong part. And is this the right way to do this?leo_hong8 years agoLevel 1691Views0likes0CommentsOracle backup job failed - Unexpected error - E0001005
Hello, I do have a difficulty again backing up the Oracle Instance. It was working fine since last year,but it started to fail a days back. We are using Symantec Backup Exec Applicance - Symantec Backup Exec 2015 on Windows 2008 R2 server. All credentials tested and OK again. I have also installed the new fix pack, which should address this issue, but still the same issue (below scree). -https://www.veritas.com/support/en_US/article.000100540 New agent installed and setup as per recommendations. Thank you in advance for any information on this. Vladimirvladimirpapouse8 years agoLevel 11.5KViews0likes4CommentsBackup exec appliance OS crashed
Dear all, Im new to symantec and Im a system engineer for an oil and gas company.I need your thoughts and ideas on a problem Im facing.I have a symantec BE 3600 appliance which has OS windows server storage 2008 standard os.Recently,I cannot access the device remotely and using my cable.I want to reinstal the OS.IS it possible to just remove the first hard disc and install the os in it,then replace because i dont know on which hard disc the OS is installed1KViews0likes2CommentsR4 (BE 15) fails to add Linux host and establish trust with ralus
I have 2 appliances right now, respectively on R2 (BE 2012) and R4 (BE 15), and recently copied the SQL thing all the settings from the R2 one to R4 one to save loads of work after migration. However, I discovered that the R4 cannot establish trust with one of my Linux hosts. 1. Tried upgrading the ralus agent from14.0.1798.1373 to the newest14.2.1180.3157: not work 2. Tried reinstalling the agent for both versions: not work 3.One of the previous posts suggested "encode=LATIN-1": not work too 4.Removed the host and can't even add it back now But if I use R2 to re-connect it, trust can be established. Ports areallowed in the firewall since theyare being used in the whole time. Don't really know what's going on.....could anyone please help? ralus.cfg is here, 192.168.5.14 is the IP of the R4:JPoon8 years agoLevel 4653Views0likes0Commentsreinstalling symantec BE 3600
Im new with symantec Backup and would like a step by step guide.I work for a company and My symantec BE 3600 appliance crushed.It cannot boot anymore so I reformated it and installed back windows server storage standard 2008 which i thought was the OS originally on it.I cannot get symantec running from this device again.How do i install symantec.The only software I have are disaster recovery discs which came with the appliance and a USB which have some symantec software.I want to have my device back to factory default so that i can use it again.Kindly help.....Dumba_alex9 years agoLevel 2626Views0likes0CommentsBE3600 Upgrade preparation
Hi folks, My company has 1 CAS and 1 MMS BE3600 appliances in two different sites and I'm now working on the upgrade preparation from R2 to R3 and later to R4. I know from this article the recommended sequence. However, a couple of questions come up in my mind about it: 1) Now that there are duplicate jobs between the two appliances for cross-site data resiliency. During the upgrade, with the communication disabled, I know that all the duplicate jobs have to be put on hold. But after I finish upgrading the CAS to R3 while the MMS is still R2*, can I enable the communcation and unhold the jobs on each appliance to resume the duplication? Will the duplicate jobs encounter failure due to the different versions? 2) After I finish upgrading the CAS, can I upgrade the agents on the backup hosts (e.g. Windows agents, Linux RALUS) of the CAS's site first so that the local backup jobs can resume? * The reason for me not to upgrade the MMS immediately after the CAS is because, first, they are located in two sites; second, I need to observe if the backup jobs will go wrong after the upgrade. 3) On the other hand, does the upgrade ever fail? I know I can back up the Data and Catalogs folders beforehand for emergency, but if anything really goes wrong, what should I do with these 2 folders? any specific guidelines for fallback? Thanks.Solved2.3KViews0likes3CommentsIncreasing Storage
Greetings to the well of knowledge... I know this has been discussed ad nauseam, but I don't think I've heard an answer to this one: Understanding that the storage would need to be reconfigured and that the current backup sets would be lost, can the physical disks in the appliance be replaced to increase capacity? Currently, there are four 1.8 TB drives in the appliance configured as RAID 5. Why can I not replace these with 3TB drives and rebuild the storage and the database? Seems like this should be possible. Regards, Ken788Views0likes1Comment