A_ride_4_ever
15 years agoLevel 3
BEXEC 12.5 puts 2nd drive offline in MSL4048 after extended use.
OK here is a question I hope someone has an answer to. I have a MSL4048 LTO3 FC with 2 drives, Whats happening is after a few hrs of using both drives at the same time I will loose drive 2, Drive 1 stays on line. When I lose drive 2 there is no hardware logs or reports of errors from the HBA or the library itself, Both drives were replaced less than a month ago. The HBA is new. In order for me to get backup exec to use the 2nd drive again it requires restarting the library and restarting the services for Bexec. This will run for a while then it will drop drive to again. HP has replaced everything with new parts and the HBA has been replaced as well. If anyone can come up with a viable solution there's a six pack of beer or Java and a really big thank you in it for you :-)
I have includid the adamm.txt so you can see whats going on.
I have includid the adamm.txt so you can see whats going on.
- Hi there,
Came across this one again. It references high-polling on HP StorageWorks MSLs.
We've had something similar in our data centre using ARCserve 11.5, and this was a fix. Might prompt you in the right direction.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=uk&taskId=110&prodSeriesId=3936307&prodTypeId=12169&prodSeriesId=3936307&objectID=c01567338
If you make registry changes, don't forget to back it up first!
Laters!